ArcelorMittal Nippon Steel Assistant Manager II Interview Questions and Answers

Q1. All details about DRI600(Direct Reduced Iron Plant) Project with DRI project management and specialist team ,and HR
Add your answer
Q2. Others technical matter about civil engineering Project. etc.
Add your answer
Q3. Structural details about DRI Project
Add your answer

Q1. Definition and Analysis of Listed Company
Ans. 
A listed company is a publicly traded company whose shares are traded on a stock exchange.
• Listed companies must adhere to strict regulations and reporting requirements set by the stock exchange.

• Investors can buy and sell shares of listed companies on the stock exchange.

• Listed companies often have a higher level of transparency and accountability compared to private companies.

• Examples of listed companies include Apple I
Answered by AI
Add your answer
Q2. Secretarial Compliances requirement for Listed Company
Ans. 
Secretarial compliances for a listed company include adherence to regulations set by stock exchanges and regulatory bodies.
• Regular submission of financial reports and disclosures to stock exchanges

• Compliance with SEBI regulations and guidelines

• Conducting board meetings within specified time frames

• Maintaining proper records and registers as per Companies Act

• Ensuring timely communication with shareholders and investors
Answered by AI
Add your answer

Q1. What will you check before starting erection activities?
Ans. 
Before starting erection activities, it is important to check for safety hazards, proper equipment, and necessary permits.
• Ensure all safety hazards are identified and addressed

• Check that all necessary equipment is in working order

• Verify that all required permits and approvals are obtained

• Inspect the site for any potential obstacles or obstructions
Answered by AI
Add your answer
Q2. Selection of Crane?
Ans. 
The selection of a crane depends on factors such as weight capacity, reach, height, and terrain.
• Consider the weight capacity of the crane to ensure it can lift the required loads.

• Evaluate the reach and height of the crane to determine if it can access the work area effectively.

• Take into account the terrain where the crane will be operating to choose the appropriate type (e.g. rough terrain crane, crawler crane).
Answered by AI
Add your answer
Q3. Load angle Factor ?
Ans. 
Load angle factor is a term used in engineering to describe the angle at which a load is applied to a structure.
• Load angle factor is important in determining the stress and strain on a structure.

• It is typically calculated by taking the cosine of the angle at which the load is applied.

• For example, if a load is applied at a 45 degree angle, the load angle factor would be cos(45) = 0.707.
Answered by AI
Add your answer
Q4. Sling angle Factor?
Ans. 
Sling angle factor refers to the angle at which a sling is attached to a load, affecting the load's stability and the force exerted on the sling.
• Sling angle factor is calculated by dividing the actual load weight by the weight of the load being lifted.

• A smaller sling angle increases the force on the sling and decreases its capacity.

• A larger sling angle reduces the force on the sling and increases its capacity.

• Proper ca...read more
Answered by AI
Add your answer
Q5. Safe Load lifting percentage ?
Ans. 
Safe load lifting percentage refers to the maximum weight a person can safely lift based on their capabilities.
• Safe load lifting percentage is typically calculated as a percentage of a person's maximum lifting capacity.

• Factors such as age, gender, fitness level, and previous injuries can affect safe load lifting percentage.

• It is important for employees to be trained on proper lifting techniques to prevent injuries.

• For ...read more
Answered by AI
Add your answer
Q6. What is HIRA ?
Ans. 
HIRA stands for Hazard Identification and Risk Assessment. It is a process used to identify potential hazards and analyze the associated risks in a workplace.
• HIRA involves identifying hazards that could cause harm, assessing the risks associated with those hazards, and implementing control measures to mitigate the risks.

• Examples of hazards include chemical exposure, machinery malfunctions, and ergonomic issues.

• The goal...read more
Answered by AI
Add your answer
Q7. How will you prepare HIRA?
Add your answer
Q8. Difference between MCB,ELCB,RCCB?
Ans. 
MCB is a miniature circuit breaker, ELCB is an earth leakage circuit breaker, and RCCB is a residual current circuit breaker.
• MCB is used to protect electrical circuits from overloads and short circuits.

• ELCB is used to detect earth faults and disconnect the power supply to prevent electric shocks.

• RCCB is used to detect residual current imbalances and disconnect the circuit to prevent electric shocks.

• MCB and RCCB are com...read more
Answered by AI
Add your answer
Q9. How will you check the Crane girder Camber?
Ans. 
To check the Crane girder Camber, measurements can be taken using a straight edge or laser level.
• Use a straight edge to measure the camber of the crane girder by placing it along the length of the girder and checking for any deviations from a straight line.

• Alternatively, a laser level can be used to project a straight line along the length of the girder and measure any deviations from this line.

• Regular inspections shou...read more
Answered by AI
Add your answer
Q10. Difference between Luffing and fly jib ?
Ans. 
Luffing jib moves vertically to change the angle of the hook, while fly jib extends horizontally to increase reach.
• Luffing jib is used to change the angle of the hook without moving the crane itself.

• Fly jib extends horizontally to increase the reach of the crane.

• Luffing jib moves vertically, while fly jib moves horizontally.

• Luffing jib is commonly used in high-rise construction projects, while fly jib is used for reach...read more
Answered by AI
Add your answer

Aptitude + Core + Psychology Test

Trending topics , abstract topics, Anything.

Q1. About Yourself, your family, core engineering subjects.
Add your answer
Q2. Projects & Internships written in your resume.
Add your answer
Q3. Depends upon their mood
Add your answer

Q1. General HR, questions, Why should we hire u?
Add your answer
Q2. Where do u see yourself in 5 yrs from now
Add your answer
Q3. How bad do u want this job opportunity, what you will be bring in to the table for us,
Add your answer
Q4. They told me its a core engineering job, will u be able to adapt to the environment!!
Add your answer

Q1. Are you a qualified ca or not?
Add your answer

General questions related to job profile

Q1. Question related to direct tax amendments
Add your answer

Q1. Explain MTTR, MTBF
Ans. 
MTTR stands for Mean Time To Repair and MTBF stands for Mean Time Between Failures.
• MTTR is the average time taken to repair a failed component or system.

• MTBF is the average time between failures of a component or system.

• MTTR is calculated as total downtime divided by the number of failures.

• MTBF is calculated as total uptime divided by the number of failures.

• MTTR is usually measured in hours or minutes, while MTBF is me...read more
Answered by AI
Add your answer
Q2. How to balancing impeller
Ans. 
Balancing an impeller involves adjusting the weight distribution to minimize vibration and improve performance.
• Identify the heavy spots on the impeller

• Add or remove material to balance the impeller

• Use a balancing machine to check the balance

• Repeat the process until the impeller is properly balanced
Answered by AI
Add your answer

Q1. ABB DCS knowledge
Add your answer
Q2. DCS Architecture and logic knowledge
Add your answer

Debate on multiple topics

Q1. Questions related to Operation Research
Add your answer

Come out with a conclusion and solutions to a problem

Q1. About previous experience, challenges and accolades.
Add your answer