Filter interviews by
I applied via Walk-in and was interviewed before Nov 2020. There was 1 interview round.
The primary arrestment for pump fixing is to identify the root cause of the issue.
Identify the root cause of the issue
Check for any leaks or damages in the pump
Inspect the impeller and bearings for wear and tear
Ensure proper alignment of the pump and motor
Check the electrical connections and voltage supply
Perform regular maintenance and cleaning
Use high-quality replacement parts
Train personnel on proper operation and m
Top trending discussions
The execution of an elevated viaduct involves various tasks such as pile foundation, pier construction, post-tensioning girders, and bridge structures.
Tasks include pile foundation construction for the viaduct, pier construction for support, post-tensioning of girders for strength, and bridge structure assembly.
Activities also involve conducting load tests, NDT tests, deflection tests, and steel reconciliation for qual...
posted on 14 Jun 2024
I applied via LinkedIn and was interviewed in Feb 2024. There were 4 interview rounds.
How to manage site structure to finishing work
Technical/ mathematics
posted on 13 Jan 2024
I applied via Walk-in and was interviewed in Dec 2023. There were 2 interview rounds.
The test procedures for cement, steel, coarse aggregate, and sand involve various physical and chemical tests to ensure quality and suitability for construction purposes.
Cement: Tests include fineness, setting time, compressive strength, soundness, and chemical composition.
Steel: Tests involve tensile strength, yield strength, elongation, and chemical composition.
Coarse Aggregate: Tests include sieve analysis, specific...
The grade of concrete refers to its strength and durability.
Concrete is graded based on its compressive strength, measured in megapascals (MPa).
Common grades of concrete include M10, M15, M20, M25, etc.
The higher the grade, the stronger the concrete.
Different grades of concrete are used for different applications, such as foundations, slabs, columns, etc.
28 days cube strength is a measure of the compressive strength of concrete after 28 days of curing.
28 days cube strength refers to the compressive strength of concrete cubes after they have been cured for 28 days.
It is an important parameter to assess the quality and durability of concrete.
The value of 28 days cube strength is typically expressed in megapascals (MPa) or pounds per square inch (psi).
It is determined by ...
I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.
Surging is a phenomenon in which a system experiences rapid and temporary increases in pressure or flow rate.
Surging can occur in various systems such as pipelines, compressors, pumps, and turbines.
It is often caused by sudden changes in demand, equipment malfunctions, or improper system design.
Surging can lead to damage to equipment, reduced efficiency, and safety hazards.
Examples include water hammer in pipelines and
Froude number is a dimensionless number used to quantify the influence of gravity on fluid flow.
Froude number is defined as the ratio of inertia force to gravitational force in a fluid flow.
It is used to determine the type of flow (subcritical, critical, or supercritical) in open channel flow.
Froude number is calculated as Fr = V / sqrt(g * d), where V is velocity, g is acceleration due to gravity, and d is depth of fl
Weeping is the process of fluid leaking out of a solid material, often due to damage or excess moisture.
Weeping can occur in materials such as wood, concrete, and metal.
It is often a sign of structural damage or deterioration.
Examples include water weeping from a crack in a wall or oil weeping from a car engine.
Weeping can also refer to the shedding of tears in humans and animals.
A basic PFD of a WTP plant including feed quality and sensors.
Include feed quality parameters such as turbidity, pH, temperature, and flow rate
Include sensors for monitoring parameters like chlorine levels, pressure, and conductivity
Show the flow of water through various treatment processes like coagulation, flocculation, sedimentation, filtration, and disinfection
Process checks in line testing of a 6inch dia pigging line and associated calculations
Pressure testing to ensure integrity of the line
Flow testing to check for blockages or restrictions
Calibration of pigging equipment for accurate results
Calculations involve pressure drop, flow rate, and pigging efficiency
Recording and analyzing data for future reference
posted on 13 Jun 2024
I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.
The rate of different diameters of couplers can vary based on the specific type and manufacturer.
The rate of different diameters of couplers can depend on factors such as material, quality, and brand.
Some common diameters for couplers include 1/2 inch, 3/4 inch, and 1 inch.
Rates may also vary based on the intended use of the coupler, such as for plumbing or electrical connections.
Rate of threading varies based on the diameter of the thread.
The rate of threading increases with larger thread diameters.
Smaller thread diameters require slower threading rates to prevent damage.
Factors such as material type and cutting tool also impact threading rate.
For example, a 1/4 inch thread may have a different threading rate than a 1 inch thread.
To complete my target within time, I prioritize tasks, set realistic deadlines, communicate effectively with team members, and regularly track progress.
Prioritize tasks based on importance and deadlines
Set realistic deadlines and break down tasks into smaller achievable goals
Communicate effectively with team members to ensure everyone is on the same page
Regularly track progress and make adjustments as needed
Use tools l...
posted on 18 Jul 2023
based on 1 review
Rating in categories
Senior Engineer
7
salaries
| ₹4.8 L/yr - ₹8 L/yr |
Civil Site Engineer
7
salaries
| ₹2.2 L/yr - ₹5 L/yr |
Safety Officer
6
salaries
| ₹2.1 L/yr - ₹3.2 L/yr |
Civil Engineer
6
salaries
| ₹3.2 L/yr - ₹5 L/yr |
Project Engineer
4
salaries
| ₹2.5 L/yr - ₹5.5 L/yr |
Larsen & Toubro Limited
L&T Construction
Tata Projects
Megha Engineering & Infrastructures