Upload Button Icon Add office photos

Ag Industries

Compare button icon Compare button icon Compare

Filter interviews by

Ag Industries NPD Engineer Interview Questions, Process, and Tips

Updated 13 Nov 2024

Ag Industries NPD Engineer Interview Experiences

1 interview found

NPD Engineer Interview Questions & Answers

user image Anonymous

posted on 13 Nov 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(6 Questions)

  • Q1. What's your roles and responsibilities?
  • Q2. How you manage you multiple work at a time?
  • Q3. Difference between jig and fixture?
  • Ans. 

    Jigs guide the cutting tool, while fixtures hold the workpiece in place during machining.

    • Jigs are used to guide the cutting tool, ensuring accuracy and repeatability.

    • Fixtures are used to hold the workpiece in place during machining operations.

    • Jigs are often used in drilling, tapping, and reaming operations.

    • Fixtures are commonly used in milling, grinding, and welding processes.

  • Answered by AI
  • Q4. What's mould flow analysis?
  • Ans. 

    Mould flow analysis is a simulation technique used to predict how molten plastic will flow in a mold during the injection molding process.

    • Helps optimize the design of the mold and the injection molding process

    • Identifies potential issues such as air traps, weld lines, and sink marks

    • Allows for adjustments to be made before physical production begins

    • Can improve part quality and reduce manufacturing costs

  • Answered by AI
  • Q5. What's cp and cpk?
  • Ans. 

    Cp and Cpk are process capability indices used to assess the ability of a process to produce output within specification limits.

    • Cp is a measure of process capability that compares the spread of the process to the width of the specification limits.

    • Cpk takes into account the centering of the process within the specification limits as well.

    • Higher values of Cp and Cpk indicate better process capability.

    • For Cp, a value of 1...

  • Answered by AI
  • Q6. How many documents in ppap and tell all in detail?
  • Ans. 

    PPAP typically consists of 18 documents including items like control plans, FMEAs, and PSWs.

    • PPAP typically consists of 18 documents

    • Some key documents in PPAP include control plans, FMEAs, PSWs, and dimensional results

    • Each document serves a specific purpose in ensuring product quality and compliance

  • Answered by AI
Round 2 - HR 

(3 Questions)

  • Q1. Tested my communication skills
  • Q2. Salary expectation and date of joining?
  • Q3. Suggest me to make my personality more good
  • Ans. 

    To improve your personality, focus on communication skills, empathy, positivity, and self-awareness.

    • Work on improving your communication skills by actively listening, speaking clearly, and being assertive.

    • Practice empathy by putting yourself in others' shoes and showing understanding and compassion.

    • Maintain a positive attitude, even in challenging situations, to inspire and uplift those around you.

    • Increase self-awarene...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - No

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. 7Qc Tools 8D X- Bar Chart Casting And Machining Defects About Your Self Difference Bt Accuracy and Precision About Gd&T Role And Responsibility Of Your Current Company
Round 3 - HR 

(1 Question)

  • Q1. Why You Want to Join This Company And Last One Is How Much You Expected Ctc
Interview experience
2
Poor
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me more about yourself
  • Ans. 

    I am a Quality Engineer with experience in ensuring product quality and implementing quality control processes.

    • Experienced in conducting quality audits and inspections

    • Proficient in using quality tools and techniques such as Six Sigma and Lean

    • Skilled in analyzing data and identifying areas for improvement

    • Strong knowledge of quality standards and regulations

    • Effective communicator and collaborator in cross-functional team

  • Answered by AI
  • Q2. What have you done
  • Ans. 

    As a Quality Engineer, I have implemented various quality control measures and conducted audits to ensure product compliance.

    • Implemented quality control processes to monitor and improve product quality

    • Conducted audits to identify non-conformities and implement corrective actions

    • Collaborated with cross-functional teams to develop and implement quality standards

    • Performed root cause analysis and implemented preventive mea...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Least count of micrometre
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale.

    • The least count of a micrometer is determined by the number of divisions on the scale and the pitch of the screw.

    • For example, a micrometer with 50 divisions on the scale and a pitch of 0.5 mm would have a least count of 0.01 mm.

    • The least count is important for accurate measurements and should be taken into consideration when using

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is Quality control function
  • Ans. 

    Quality control function involves monitoring and testing products to ensure they meet the required standards.

    • Quality control function involves inspecting products to ensure they meet the required specifications

    • It involves testing products to ensure they function as intended

    • It involves monitoring the production process to identify and correct any defects

    • Examples include checking the weight and dimensions of a product, t...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. 2 stroke and four stroke engine

I applied via Walk-in and was interviewed in Aug 2021. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. G code & M code , what is m29& it's benefits? Drill and tap program,hole dialing etc.
  • Ans. 

    M29 is a G-code used to stop writing to an SD card or other storage device.

    • M29 is used to end a file when writing to an SD card or other storage device.

    • It ensures that all data is written and prevents corruption of the file.

    • It is commonly used in CNC machines for drilling and tapping programs.

    • It can also be used for hole dialing and other precision operations.

    • M29 is often used in conjunction with other G and M codes to

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give interview in free mind & prepare your resume very well.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Taken apptitude teat for general question like mcq type

Round 3 - Technical 

(1 Question)

  • Q1. Fmea,ppap,supplier rating

I applied via Job Portal and was interviewed before Jul 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Are you feeling worth for your Expected salary ? justify
  • Q2. What was your biggest failure
  • Q3. Why you want this job
  • Q4. Why your salary was bit low

Interview Preparation Tips

Interview preparation tips for other job seekers - first round was with HR,
General Questions about my education & family background, finally Salary Expectations.. Then i was asked to wait in reception. The gesture was very good, HR also treated me politely.
An hour in a reception, i observed was , this company~s 90% employees are Belongs to One of the Higher C*s*e.
Second round Was with Senior level Manger,
They didn't treated me well, Trying to make me, Uncomfortable, Questions are like to irritating to you..
No Questions are from Technical
1. Are you feeling worth for this expected salary.(40% hike i asked)
2.Why you need a job in Rane ? How firm your suitable to this role.
(HR shortlisted my resume as per my current JD, You have to evaluate )
3.What was your biggest Failure?
(I dont Want to expose my failure- he trying to pin point my mistake& Reject me )
4. Why Your Salary was Bit Low ?
(Covid Situaions- no hikes)
Then he called Some one , Shouted infront of me like this..
How they shortlisted, this kind of Low CTC Profiles ...
With whom permission, how This people are came for interview?

i understood that i was their problem, He was unhappy with my first appearance,
he judgmental with me. i was not able tolerate, Finally I came out.
i didn't complained with HR also, Because the company is full of their people. No worth in complaining..


Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. 7 qc tools ,4m change, skill Matrix,5s ,poka yoka
  • Q2. Documents work mail ,skin ,
  • Q3. 4m change, skill Matrix

I applied via Walk-in and was interviewed before Dec 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. 1. How do you handle uncooperative staff?
  • Q2. 2. How do you ensure the quality of materials and products?
  • Ans. 

    Quality of materials and products is ensured through various methods.

    • Establishing quality standards and procedures

    • Conducting regular inspections and tests

    • Collaborating with suppliers to ensure quality materials

    • Implementing corrective actions when necessary

    • Continuous improvement through data analysis and feedback

    • Training employees on quality control measures

  • Answered by AI
  • Q3. 3. Can you describe how you investigate production flaws?
  • Ans. 

    I investigate production flaws by analyzing data, conducting root cause analysis, and implementing corrective actions.

    • Collect and analyze data on the production process

    • Conduct root cause analysis to identify the source of the flaw

    • Develop and implement corrective actions to prevent future flaws

    • Collaborate with production team to ensure corrective actions are effective

    • Document findings and actions taken for future refere

  • Answered by AI
  • Q4. 4. Can you describe a recent project in which you successfully implemented quality control procedures?
  • Ans. 

    Implemented quality control procedures in a project for improving product reliability.

    • Identified critical areas for quality control and developed a plan

    • Conducted regular inspections and audits to ensure compliance

    • Implemented statistical process control to monitor and improve product quality

    • Collaborated with cross-functional teams to address quality issues and implement corrective actions

    • Trained employees on quality con

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be in formal dress
Be prepared
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Personal information
  • Q2. Reason to leave
Round 3 - Technical 

(3 Questions)

  • Q1. About my previous job
  • Q2. Previous job KPI
  • Ans. 

    My previous job KPI was to increase sales revenue by 20% within a year.

    • My KPI was to increase sales revenue by 20% within a year

    • I achieved this by implementing targeted marketing campaigns

    • I also optimized the sales process to improve efficiency

    • Regularly analyzed sales data to identify areas for improvement

  • Answered by AI
  • Q3. Targets and achievements
Round 4 - Group Discussion 

Interview with Plant Chairman

Interview Preparation Tips

Interview preparation tips for other job seekers - Make Contacts with Conseltancy

Ag Industries Interview FAQs

How many rounds are there in Ag Industries NPD Engineer interview?
Ag Industries interview process usually has 2 rounds. The most common rounds in the Ag Industries interview process are Technical and HR.
What are the top questions asked in Ag Industries NPD Engineer interview?

Some of the top questions asked at the Ag Industries NPD Engineer interview -

  1. How many documents in ppap and tell all in deta...read more
  2. Suggest me to make my personality more g...read more
  3. What's mould flow analys...read more

Tell us how to improve this page.

Ag Industries NPD Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Global Autotech Interview Questions
4.0
 • 47 Interviews
Mikuni Interview Questions
4.2
 • 20 Interviews
ABC Bearings Interview Questions
3.9
 • 19 Interviews
View all
Ag Industries NPD Engineer Salary
based on 5 salaries
₹3.6 L/yr - ₹4.5 L/yr
12% more than the average NPD Engineer Salary in India
View more details

Ag Industries NPD Engineer Reviews and Ratings

based on 4 reviews

4.3/5

Rating in categories

4.3

Skill development

4.3

Work-life balance

4.3

Salary

4.3

Job security

3.5

Company culture

4.3

Promotions

3.4

Work satisfaction

Explore 4 Reviews and Ratings
Assistant Engineer
222 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
206 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
148 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
100 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Ag Industries with

ZF Steering Gear

3.7
Compare

Toyoda Gosei Minda

4.1
Compare

Global Autotech

4.0
Compare

Mikuni

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview