Filter interviews by
I applied via Job Portal and was interviewed before Jul 2020. There were 4 interview rounds.
I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.
I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Dec 2020. There were 3 interview rounds.
I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.
The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.
Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.
Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.
Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for
A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.
Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.
They are designed to capture particles that are smaller than what can be filtered by regular filters.
These filters can be made of various materials such as paper, fabric, or synthetic fibers.
Examples of size ...
Direct metalizing is applicable on materials that can conduct electricity.
Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.
The material should be able to conduct electricity for direct metalizing to be applicable.
Materials like plastic, glass, and ceramics can be direct metalized.
Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.
The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.
UV energy required for curing varies depending on the material being cured
Intensity of the UV light also affects the amount of energy required
UV energy is typically measured in Joules per square centimeter (J/cm²)
Examples of materials that require UV curing include adhesives, coatings, and inks
The amount of DFT required as per standard varies depending on the specific industry and project requirements.
The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.
Different industries may have different standards for DFT.
The complexity and size of the project also influence the amount of DFT required.
DFT techniques include scan chains, built-in self-test (BI...
posted on 19 Jan 2021
I appeared for an interview in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
posted on 29 Jun 2021
I applied via Naukri.com and was interviewed in May 2021. There was 1 interview round.
Types of current include direct current (DC) and alternating current (AC).
Direct current (DC) flows in one direction and has a constant magnitude.
Alternating current (AC) periodically changes direction and magnitude.
Examples of DC include batteries and solar cells.
Examples of AC include power grids and household outlets.
The frequency of alternative current is measured in hertz (Hz).
The unit of measurement for alternative current frequency is hertz (Hz).
Hertz is defined as one cycle per second.
Common frequencies for alternative current include 50 Hz and 60 Hz.
Higher frequencies, such as 400 Hz, are used in some specialized applications.
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
based on 6 reviews
Rating in categories
Senior Engineer
69
salaries
| ₹3.2 L/yr - ₹7 L/yr |
Assistant Manager
47
salaries
| ₹5.3 L/yr - ₹8.6 L/yr |
Deputy Manager
42
salaries
| ₹6 L/yr - ₹11.8 L/yr |
Engineer
22
salaries
| ₹2.4 L/yr - ₹4.5 L/yr |
Production Supervisor
19
salaries
| ₹0.9 L/yr - ₹3.9 L/yr |
Bosch
Samvardhana Motherson Group
MRF Tyres
Ceat Tyres