Add office photos
Filter interviews by
Adani Gas Third Party Inspection Engineer Interview Questions, Process, and Tips
Adani Gas Third Party Inspection Engineer Interview Experiences
1 interview found
Manvir Singh
I applied via Recruitment Consultant and was interviewed in Oct 2021. There was 1 interview round.
Interview Questionnaire
7 Questions
- Q1. Types of pipes used in gas supply?
- Ans.
Various types of pipes are used in gas supply including steel, copper, polyethylene, and PVC.
Steel pipes are commonly used for high-pressure gas transmission lines.
Copper pipes are used for indoor gas lines and have good corrosion resistance.
Polyethylene pipes are flexible and can be used for both underground and aboveground gas lines.
PVC pipes are used for low-pressure gas distribution lines and have good chemical res...
- Q2. Pressure to be supplied at various points such as at Tapping point , pressure at nozzle and main gas pipeline pressure ?
- Ans.
Pressure to be supplied at various points in a Third Party Inspection Engineer role.
The pressure at the tapping point refers to the pressure required for taking a sample or measurement from a pipeline.
The pressure at the nozzle refers to the pressure required for the efficient operation of a specific equipment or device.
The main gas pipeline pressure refers to the pressure required for the overall functioning and distr...
- Q3. Types of joints ?
- Ans.
Types of joints include butt joint, lap joint, T-joint, corner joint, and edge joint.
Butt joint: Two pieces of material are joined by their ends.
Lap joint: One piece overlaps the other and they are fastened together.
T-joint: One piece is perpendicular to the other, forming a T shape.
Corner joint: Two pieces are joined at a right angle.
Edge joint: Two pieces are joined along their edges.
- Q4. Various pipes with different diameters to be fitted ?
- Ans.
Yes, various pipes with different diameters can be fitted.
Different pipes can be fitted by using appropriate connectors or adapters.
Measurements of the pipes' diameters should be taken accurately to ensure proper fitting.
Consideration should be given to the flow requirements and pressure ratings of the pipes.
Examples of fittings include couplings, reducers, elbows, and tees.
- Q5. Testing methods, pressure units, pressure measuring device?
- Ans. Soap water testing and pneumatic testing at leakage testing. Pressure to be measured by pressure gauge.
- Q6. Holding and testing timings.
- Ans. Holding to be done for 24 hrs at 4.2 mili baar in riser.
- Q7. What is Tapping, Riser ?
- Ans.
Tapping is a process of making a hole in a pipe or vessel for connecting a branch pipe. A riser is a vertical pipe used to transport fluids from a lower level to a higher level.
Tapping is done to connect a branch pipe to the main pipe or vessel.
Risers are commonly used in oil and gas drilling to transport drilling fluids from the wellbore to the surface.
Tapping and riser installation should be done carefully to avoid l...
Interview Preparation Tips
Always share your past experience with the interviewer.
Top trending discussions
Interview questions from similar companies
Third Party Engineer Interview Questions & Answers
Mahanagar Gas
Mandar Prakash Vaity
posted on 8 Aug 2024
Selected
I applied via Referral and was interviewed in Jul 2024. There was 1 interview round.
(2 Questions)
- Q1. Where do u worked before
- Ans.
I worked at XYZ Company as a Third Party Engineer for 3 years.
Worked at XYZ Company for 3 years
Handled third party engineering projects
Collaborated with external vendors for project execution
- Q2. Ready to work at site, wherever in mumbai?
- Ans.
Yes, I am ready to work at any site in Mumbai.
I am flexible and willing to work at any location in Mumbai.
I understand the importance of being on-site for third party engineering work.
I have experience working at various sites in Mumbai.
I am familiar with the transportation options available in Mumbai for commuting to different sites.
Selected
I applied via Walk-in and was interviewed in Dec 2022. There was 1 interview round.
(2 Questions)
- Q1. How to do work in igl.
- Ans.
To work in IGL, one must have knowledge of inspection techniques and equipment used in the oil and gas industry.
Understand the inspection requirements and standards set by IGL
Use appropriate inspection techniques and equipment
Ensure compliance with safety regulations
Maintain accurate records of inspections and findings
Communicate effectively with team members and clients
Continuously improve knowledge and skills through...
- Q2. What type of work in Bonace.
Interview Preparation Tips
(2 Questions)
- Q1. What do you mean by mdpe?
- Ans.
MDPE stands for Medium Density Polyethylene.
MDPE is a type of plastic commonly used in the manufacturing of pipes and fittings.
It has a higher density than LDPE (Low Density Polyethylene) but lower than HDPE (High Density Polyethylene).
MDPE is known for its excellent resistance to stress cracking and good chemical resistance.
It is often used for gas and water distribution systems, as well as in the agricultural and min
- Q2. Medium density polyethylene It is used to keep gas underground to main chamber It is of various dimensions such as 20mm 40mm etc
Interview Preparation Tips
- Gi and mdpe
(2 Questions)
- Q1. What type of level instrument can you use in certain applications
- Ans.
Different types of level instruments can be used in different applications depending on the requirements.
For continuous level measurement, ultrasonic level sensors can be used.
For point level detection, capacitance level switches can be used.
For high-temperature applications, guided wave radar level sensors can be used.
For corrosive or aggressive liquids, magnetic level gauges can be used.
For level measurement in open
- Q2. Competency questions
Interview Preparation Tips
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
(1 Question)
- Q1. 1. Tell me about urself. 2. Questions from whatever projects,achievements you highlighted in resume or during answering ques bo 1
Interview Preparation Tips
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
(1 Question)
- Q1. 1. Tell me about urself. 2. Questions from whatever projects,achievements you highlighted in resume or during answering ques bo 1
Interview Preparation Tips
I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. It was technical questions asked by the interviewer related site work and the activity if the work.
- Q2. And the confidence level of the condidate which is mandatory for the job.
Interview Preparation Tips
Electrical Engineer Interview Questions & Answers
Confidence Petroleum India
Anonymous
posted on 12 May 2018
I applied via Recruitment Consultant and was interviewed in Mar 2018. There were 7 interview rounds.
Interview Questionnaire
3 Questions
- Q1. About yourself and your role in previous job.
- Q2. What do you know about lpg plant and tell some Electrical and Electronics equipment in lpg plant ?
- Ans.
An LPG plant is a facility that processes and stores liquefied petroleum gas. It requires various electrical and electronic equipment for its operations.
LPG plant is a facility that processes and stores liquefied petroleum gas
Electrical equipment in an LPG plant includes transformers, switchgear, motors, and control panels
Electronic equipment in an LPG plant includes sensors, transmitters, and PLCs
Examples of electrica...
- Q3. What do you know about NO&NC Contactor.
Interview Preparation Tips
Experience: Experienced person having technical knowledge to solve problem .
Round: Test
Experience: About all questions related to LPG Plant operation.
Round: Salary Negotiation
Experience: HR FIX SALARY.
General Tips: Do the best try and tell the truth to the interviewer never try to oversmart .
Skills: Communication, Problem Solving, Leadership, Decision Making Skills
Duration: 1-4 weeks
Adani Gas Interview FAQs
Tell us how to improve this page.
Adani Gas Interviews By Designations
- Adani Gas Graduate Engineer Trainee (Get) Interview Questions
- Adani Gas Assistant Manager Interview Questions
- Adani Gas Graduate Trainee Interview Questions
- Adani Gas Sales Management Trainee Interview Questions
- Adani Gas Senior Engineer Interview Questions
- Adani Gas Associate Manager Interview Questions
- Adani Gas Deputy Manager Interview Questions
- Adani Gas Engineer Trainee Interview Questions
- Show more
Interview Questions for Popular Designations
- Third Party Inspector Interview Questions
- Inspection Engineer Interview Questions
- Electrical Engineer Interview Questions
- QA QC Engineer Interview Questions
- Electrical Supervisor Interview Questions
- Executive Engineer Interview Questions
- Senior Engineer Mechanical Interview Questions
- Shift Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Adani Gas Third Party Inspection Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Assistant Manager
207
salaries
|  ₹5.8 L/yr - ₹13.3 L/yr |
|
Senior Engineer
180
salaries
| ₹4.1 L/yr - ₹9 L/yr |
|
Deputy Manager
111
salaries
| ₹8 L/yr - ₹22.4 L/yr |
|
Graduate Engineer Trainee (Get)
56
salaries
| ₹4 L/yr - ₹7 L/yr |
|
Associate Manager
52
salaries
| ₹14 L/yr - ₹28.3 L/yr |
Indraprastha Gas
Gujarat State Petronet
Maharashtra Natural GAS
GAIL
Calculate your in-hand salary
- Home >
- Interviews >
- Adani Gas Interview Questions >
- Adani Gas Third Party Inspection Engineer Interview Questions
