Upload Button Icon Add office photos

Aarti Industries

Compare button icon Compare button icon Compare

Filter interviews by

Aarti Industries Mechanical Technician Interview Questions and Answers

Updated 17 Apr 2023

Aarti Industries Mechanical Technician Interview Experiences

4 interviews found

Round 1 - One-on-one 

(1 Question)

  • Q1. About pump, reactor, vaccum pump, ejector HEat exchanger
Round 2 - Technical 

(1 Question)

  • Q1. About mechanical seal ( pump and rector?)
Round 3 - HR 

(1 Question)

  • Q1. About Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Aarti Indsursty is best for work.
Safety first zero incident...
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Recruitment Consulltant and was interviewed before Apr 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Cv 

(2 Questions)

  • Q1. Cv selection process
  • Q2. Match cv as per requirements
Round 3 - Technical 

(1 Question)

  • Q1. Type of pump gerabox reactor
  • Ans. 

    The type of pump gearbox reactor depends on the specific application and requirements.

    • The pump gearbox reactor can be a centrifugal pump, positive displacement pump, or other types depending on the application.

    • The gearbox can be a single-stage or multi-stage design.

    • The reactor can be a batch or continuous process.

    • Examples include chemical processing, oil refining, and power generation.

  • Answered by AI
Round 4 - One-on-one 

(1 Question)

  • Q1. Persnality & experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical skill requirements

Mechanical Technician Interview Questions Asked at Other Companies

asked in Kent plc
Q1. 1. During confined space job , what is the role of safety watch ? ... read more
Q2. How many types of valve? What are they?
asked in AOS Orwell
Q3. what is a compressor? and give example of instrument that works o ... read more
Q4. How many types of heat exchanger? What are they?
Q5. 1) What is process before starting Excenger work ?

Interview Questionnaire 

2 Questions

  • Q1. Question on some rotary equipments
  • Q2. Allignment work

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare rotary equipments maintenance, and Allignment work

I applied via Recruitment Consultant and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About reactor, vessel entry with safety, vaccum system, PT test, alignment by dial gauge

Interview Preparation Tips

Interview preparation tips for other job seekers - What is your role in your company?
Ans :Routine PM, Conditions monitoring, break down attend,.... Then he will start question.

Aarti Industries interview questions for designations

 Senior Mechanical Technician

 (1)

 Mechanical Rotating Technician

 (1)

 Mechanical Fitter

 (1)

 Mechanical Engineer

 (1)

 Instrumentation Technician

 (3)

 Diploma Mechanical Engineer

 (1)

 Mechanical Maintenance Engineer

 (2)

 Senior Engineer Mechanical

 (1)

Interview questions from similar companies

I applied via Walk-in and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Glass line reactor mechanical seal fitting parameter
  • Ans. 

    Glass line reactor mechanical seal fitting parameters are critical for ensuring proper functioning and preventing leaks.

    • The fitting parameters depend on the type of mechanical seal being used.

    • Factors such as seal face material, seal face loading, and seal face geometry must be considered.

    • Proper installation and alignment of the mechanical seal is also important.

    • Regular maintenance and monitoring of the seal is necessar...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Run out chek
Consenrtycity chek
Seqvernetion chek
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions about mechanical related
Round 3 - One-on-one 

(1 Question)

  • Q1. Skills and competencies
Round 4 - HR 

(1 Question)

  • Q1. Payroll and expectations

Interview Preparation Tips

Interview preparation tips for other job seekers - Always believe in your self, learn fast Adobe new technologies
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Gearbox, pump, id & fan blowers,compreshar,all plant,breakdown, maintenance
  • Q2. Valve, paip line

Interview Preparation Tips

Interview preparation tips for other job seekers - check my &help
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Pump maintenance work
  • Q2. Reactor mechanical seal assembly work
  • Ans. 

    Reactor mechanical seal assembly work involves installing, maintaining, and troubleshooting mechanical seals in reactor systems.

    • Understanding the components of a mechanical seal assembly

    • Properly installing and aligning the mechanical seal

    • Performing routine maintenance on the seal to prevent leaks

    • Troubleshooting issues such as leaks or malfunctions

    • Following safety protocols when working with reactor systems

  • Answered by AI
  • Q3. Dial gauge alignment work
  • Ans. 

    Dial gauge alignment work involves ensuring the accuracy of measurements by adjusting the position of the gauge.

    • Ensure the dial gauge is securely mounted to a stable surface

    • Use a calibration standard to check the accuracy of the gauge

    • Adjust the position of the gauge by loosening the mounting screws and realigning as needed

    • Verify the accuracy of the gauge after realignment

  • Answered by AI
  • Q4. Vaccum pump vaccum problem
  • Ans. 

    Possible causes of vacuum pump vacuum problem and troubleshooting steps

    • Check for leaks in the vacuum system

    • Inspect the vacuum pump for any damage or wear

    • Ensure the pump is properly lubricated

    • Check the vacuum pump's inlet filter for clogs

    • Verify that the pump is receiving adequate power supply

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company to SRF

Interview Questionnaire 

3 Questions

  • Q1. About reactor and it's maintenance, Hoist preventive maintenance, Gearbox
  • Q2. How to do preventive of water seal
  • Ans. 

    Preventive maintenance of water seal involves regular inspection, cleaning, and replacement of worn-out parts.

    • Inspect water seal regularly for signs of wear and tear

    • Clean water seal and surrounding area to prevent buildup of debris

    • Replace worn-out parts such as gaskets and O-rings

    • Ensure proper lubrication of moving parts

    • Monitor water levels and pressure to prevent leaks

    • Train operators on proper use and maintenance of w

  • Answered by AI
  • Q3. How we select different gearboxes
  • Ans. 

    Gearboxes are selected based on torque, speed, power, and application requirements.

    • Determine the required torque and speed for the application

    • Select a gearbox with a suitable gear ratio to achieve the desired output speed and torque

    • Consider the power requirements and ensure the gearbox can handle the load

    • Choose a gearbox with the appropriate mounting and shaft configuration for the application

    • Examples of gearboxes incl

  • Answered by AI

Senior Engineer Interview Questions & Answers

SRF user image Veeravalli Lakshmiprasad

posted on 17 Oct 2019

I applied via Naukri.com and was interviewed in Sep 2019. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. R22 production
  • Q2. HCl scrubbing,Neutralisation column
  • Q3. Distillation columns,compressors and their trouble shooting

Interview Preparation Tips

Interview preparation tips for other job seekers - On Aug 17,2019..I attended an interview for the post of Senior Production Engineer in SRF,Dahej,Gujarat.I am fortunate enough that I have got very similar process experience that what SRF is manufacturing.Being a professional chemical engineer for 7 years in Hindustan Fluorocarbons Ltd,I answered almost all the questions for what the interview panel had asked me.Infact I prepared for more Monomer plant questions but they confined to R22 plant only.Then later asked about my family background and raised concerns about my relocation to gujarat for the reason being that my wife works in Infosys,Hyderabad.My wife has the facility to work from home hence I assured them of my relocation to Gujarat if given the opportunity.But HR Divya Chauhan has put it ON HOLD for the same reason.Thanks for their wonderful hospitality and flight charges reimbursement.Definitely one day I will join in SRF and explore myself to the better challenges.

Aarti Industries Interview FAQs

How many rounds are there in Aarti Industries Mechanical Technician interview?
Aarti Industries interview process usually has 3-4 rounds. The most common rounds in the Aarti Industries interview process are One-on-one Round, Technical and HR.
How to prepare for Aarti Industries Mechanical Technician interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Aarti Industries. The most common topics and skills that interviewers at Aarti Industries expect are Boiler, Coal Mill, Conveyors, Maintenance Activities and Power Plant.
What are the top questions asked in Aarti Industries Mechanical Technician interview?

Some of the top questions asked at the Aarti Industries Mechanical Technician interview -

  1. Type of pump gerabox reac...read more
  2. About reactor, vessel entry with safety, vaccum system, PT test, alignment by d...read more
  3. About pump, reactor, vaccum pump, ejector HEat exchan...read more

Tell us how to improve this page.

Aarti Industries Mechanical Technician Interview Process

based on 3 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

SRF Interview Questions
4.2
 • 179 Interviews
UPL Interview Questions
4.1
 • 174 Interviews
PI Industries Interview Questions
4.0
 • 105 Interviews
Atul Interview Questions
3.9
 • 83 Interviews
Deepak Nitrite Interview Questions
4.0
 • 43 Interviews
View all
Aarti Industries Mechanical Technician Salary
based on 114 salaries
₹2 L/yr - ₹4.5 L/yr
14% less than the average Mechanical Technician Salary in India
View more details

Aarti Industries Mechanical Technician Reviews and Ratings

based on 22 reviews

4.1/5

Rating in categories

4.3

Skill development

3.9

Work-life balance

3.4

Salary

4.0

Job security

3.6

Company culture

3.8

Promotions

3.8

Work satisfaction

Explore 22 Reviews and Ratings
Assistant Manager
608 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
579 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
525 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Plant Operator
338 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
321 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aarti Industries with

Vinati Organics

4.0
Compare

Atul

3.9
Compare

Navin Fluorine International

3.9
Compare

Solvay Specialities

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview