Upload Button Icon Add office photos

Worley

Compare button icon Compare button icon Compare

Filter interviews by

Worley Pipeline Engineer Interview Questions, Process, and Tips

Updated 27 Jan 2021

Worley Pipeline Engineer Interview Experiences

1 interview found

Interview Questionnaire 

5 Questions

  • Q1. Draw a simple line chart for 10 km action plan with in 10 min ( including all safety precautions , procurement , manpower , equipment's , all )
  • Ans. 

    A line chart for a 10 km action plan with safety precautions, procurement, manpower, and equipment.

    • Identify safety precautions needed for the project

    • Procure necessary equipment and manpower

    • Create a timeline for the project

    • Allocate resources efficiently

    • Ensure compliance with regulations and standards

    • Monitor progress and adjust plan as needed

  • Answered by AI
  • Q2. Calculate pup-piece length for - two section are already lowered and overlap 5m and s- bend rolling ,two 90 degree LR bends for 12 inch pipeline ?
  • Ans. 

    To calculate pup-piece length for a 12 inch pipeline with two sections already lowered and overlap 5m and s-bend rolling, two 90 degree LR bends.

    • Calculate the total length of the pipeline

    • Subtract the length of the two sections already lowered and overlap 5m

    • Add the length of the two 90 degree LR bends

    • Divide the result by 2 to get the length of each pup-piece

  • Answered by AI
  • Q3. How you calculate collapse and damage percentage for HDD crossings ?
  • Ans. 

    Collapse and damage percentage for HDD crossings are calculated based on various factors such as soil type, borehole diameter, and drilling fluid properties.

    • Collapse percentage is calculated using the Mohr-Coulomb failure criterion

    • Damage percentage is calculated based on the tensile strength of the pipe and the bending stress induced during the pullback process

    • Factors such as soil type, borehole diameter, and drilling ...

  • Answered by AI
  • Q4. What is methodology for rock excavation and how to measure the quantity?
  • Ans. 

    Methodology for rock excavation involves drilling, blasting, and removal of debris. Quantity is measured by volume or weight.

    • Drilling holes in rock using specialized equipment

    • Placing explosives in the holes and detonating them

    • Removing the debris using heavy machinery

    • Measuring the quantity of rock excavated by volume or weight

    • Using software to calculate the amount of explosives needed for a specific excavation project

  • Answered by AI
  • Q5. In Radiography Interpretation at 30 segment position seems like a crake , but you dint find in UT test how you solve this situation?

Interview Preparation Tips

Interview preparation tips for other job seekers - Pipeline field is full of stress and based on will power management at site fields activities , apart from technical questions have to test his stress handling ,planning and site management .And also confirm that candidate is suitable for pipeline based on his will power and how passionate in pipeline field he can fulfill his responsibilities of any critical situations and targets.

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Will ask about layout details pumps, drums, tower, utility process lines
  • Q2. Tell about yourself, your strength & weaknes
  • Ans. 

    I am a Piping Engineer with strong technical skills and attention to detail. My strengths include problem-solving, teamwork, and communication.

    • I have a Bachelor's degree in Mechanical Engineering with a specialization in Piping Design.

    • I have experience working on various projects, including designing and analyzing piping systems for industrial plants.

    • I am proficient in using software such as AutoCAD and CAESAR II for p...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, whatever in resume that will ask. Go with well prepared.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Apr 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What type of Pressure Tests are conducted on valves?
  • Ans. 

    Various pressure tests are conducted on valves including hydrostatic test, pneumatic test, and cryogenic test.

    • Hydrostatic test is conducted by filling the valve with water and pressurizing it to a specified pressure to check for leaks.

    • Pneumatic test involves using air or nitrogen to pressurize the valve and check for leaks or defects.

    • Cryogenic test is performed at low temperatures to ensure the valve can withstand extr...

  • Answered by AI
  • Q2. What are some of the most important safety considerations you make when designing piping systems?
  • Ans. 

    Safety considerations in designing piping systems are crucial for preventing accidents and ensuring the integrity of the system.

    • Ensuring proper material selection to withstand the intended pressure and temperature conditions

    • Implementing proper support and restraint systems to prevent excessive stress and vibration

    • Incorporating adequate access points for maintenance and inspection

    • Following relevant codes and standards s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Make use of networking and both online and non-online job search opportunities

I applied via Company Website and was interviewed in Jun 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. They asked about the project on which I have worked, so what you have done and doing should be properly known to you to answer such many questions on that ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be prepared with your resume, and the thing which you have mentioned should be proper to avoid hesitation. Be confident but not over-confident, be fluent and truth, don't try to hide or exaggerate.

I applied via Recruitment Consultant and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. For Piping engineer role, questions were mainly based on formulae from relevant codes and standards. Also, experience in Autopipe and Caesar II is helpful. Experience in Ansys/ Abaqus is preferred to tackl...

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with fundamental equations from codes and standards. Develop good understanding of the software like Autopipe/ Caesar.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

About pipe laying work staircase

Round 3 - HR 

(1 Question)

  • Q1. About pipe laying and tank erection
Round 4 - Technical 

(1 Question)

  • Q1. Anything about pipe laying
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I was interviewed in May 2024.

Round 1 - Piping engineer 

(2 Questions)

  • Q1. What is piping engineer
  • Ans. 

    A piping engineer is a professional responsible for designing, planning, and overseeing the installation of piping systems in various industries.

    • Designing piping systems to transport fluids or gases

    • Selecting appropriate materials for piping construction

    • Ensuring compliance with industry standards and regulations

    • Collaborating with other engineers and stakeholders on project requirements

    • Performing stress analysis and calc

  • Answered by AI
  • Q2. What is hydro testing
  • Ans. 

    Hydro testing is a process of testing the strength and integrity of pipelines or vessels by filling them with water under pressure.

    • Hydro testing is a common method used to ensure that pipelines or vessels can safely withstand the pressure they will be subjected to during normal operation.

    • During hydro testing, the pipeline or vessel is filled with water and pressurized to a level higher than the operating pressure to ch...

  • Answered by AI
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Offshore basics and platforms

Interview Preparation Tips

Interview preparation tips for other job seekers - NORSOK ALL STANDARDS FAMILIRIZATION
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Which column takes more load short or Long Column
  • Q2. What kind of pressures will impose on the water tank walls during seismic

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with fundamentals
Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. What are your strengths? weaknesses?

Worley Interview FAQs

How to prepare for Worley Pipeline Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Worley. The most common topics and skills that interviewers at Worley expect are Design Engineering, Detail Design, Detailing, FEM and Fatigue.
What are the top questions asked in Worley Pipeline Engineer interview?

Some of the top questions asked at the Worley Pipeline Engineer interview -

  1. Draw a simple line chart for 10 km action plan with in 10 min ( including all s...read more
  2. calculate pup-piece length for - two section are already lowered and overlap 5m...read more
  3. how you calculate collapse and damage percentage for HDD crossing...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 422 Interviews
KEC International Interview Questions
4.0
 • 297 Interviews
Tata Technologies Interview Questions
3.6
 • 258 Interviews
TCE Interview Questions
3.8
 • 247 Interviews
Saint-Gobain Interview Questions
4.0
 • 173 Interviews
View all

Worley Pipeline Engineer Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

2.0

Skill development

3.0

Work-life balance

2.0

Salary

3.0

Job security

3.0

Company culture

2.0

Promotions

2.0

Work satisfaction

Explore 1 Review and Rating
Process Engineer
325 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
203 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
159 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Design Engineer
153 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
150 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Worley with

Jacobs Engineering Group

4.1
Compare

Fluor Corporation

4.3
Compare

Bechtel

4.0
Compare

McDermott International

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview