Upload Button Icon Add office photos

Vedanta Aluminium

Compare button icon Compare button icon Compare

Filter interviews by

Vedanta Aluminium Production Graduate Engineer Trainee Interview Questions and Answers

Updated 24 Apr 2024

Vedanta Aluminium Production Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Types of heat exchangers ?
  • Ans. 

    Heat exchangers are devices used to transfer heat between two or more fluids, without mixing them together.

    • Shell and tube heat exchanger

    • Plate heat exchanger

    • Double pipe heat exchanger

    • Finned tube heat exchanger

    • Spiral heat exchanger

  • Answered by AI

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Approached by Company and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Average level questions

Round 2 - Technical 

(2 Questions)

  • Q1. I was asked to introduce myself
  • Q2. About different subjects I studied

Interview Preparation Tips

Interview preparation tips for other job seekers - Go for it
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic core questions

Round 2 - Technical 

(1 Question)

  • Q1. Techincal 1-1 with an onsite engineer
Round 3 - HR 

(1 Question)

  • Q1. Basic HR related question
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Difference between pump and blower
  • Ans. 

    Pumps are used to move fluids, while blowers are used to move gases.

    • Pumps are used to increase the pressure of liquids, while blowers are used to increase the pressure of gases.

    • Pumps are typically used in applications such as water supply, irrigation, and sewage systems.

    • Blowers are commonly used in applications like ventilation systems, pneumatic conveying, and combustion processes.

  • Answered by AI
  • Q2. Difference between milling and lathe machine
  • Ans. 

    Milling machine is used to remove material from a workpiece by feeding the workpiece against a rotating cutter. Lathe machine is used to rotate the workpiece against a cutting tool to remove material.

    • Milling machine uses a rotating cutter to remove material, while lathe machine uses a cutting tool that moves across the workpiece.

    • Milling machine is typically used for cutting flat surfaces, slots, and grooves, while lath...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Aug 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

General reasoning, English

Round 2 - Group Discussion 

Gave topic related to national importance and gave sufficient time to prepare

Round 3 - One-on-one 

(2 Questions)

  • Q1. Metallurgy technical questions from BTech
  • Q2. Validation from psychometric written round

Interview Preparation Tips

Interview preparation tips for other job seekers - Refine technical concepts well, be confident in GD. Prepare well for reasoning rounds.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was easy and time based

Round 2 - One-on-one 

(2 Questions)

  • Q1. Intro was asked and then steel making process. Software’s u known and about my internship in PORT.
  • Q2. Asked about stress strain curve to explain. And interviewer was very friendly. Very easy to get into this company

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident and read about company what it does and ur good to go.
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

It consists of three parts .. verbal, numerical and other ... Followed by an domain specific test.

Round 2 - Technical 

(5 Questions)

  • Q1. Tell about yourself
  • Q2. Questions related to project. ( Better to have a project done in steel plant or atleast visiting a steel plant and know what's happening there and different processes .... on other projects they were least...
  • Q3. Questions on SOM
  • Q4. For me no hr questions were asked
  • Q5. Questions related to manufacturing process

Interview Preparation Tips

Topics to prepare for ArcelorMittal Nippon Steel Production Graduate Engineer Trainee interview:
  • Strength of materials
  • Material Science
  • Manufacturing Process
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Dec 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Aptitude test was easy and everything can be answered if you know the basics of mechanical engineering all questions were easy to moderate level.

Round 2 - Group Discussion 

Recent and trending topics were pick to discuss you must raise your voice to speak and two topics will be given and everyone will get chance to speak

Round 3 - One-on-one 

(2 Questions)

  • Q1. Explain about stress strain curve
  • Ans. 

    The stress-strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.

    • The curve typically consists of several distinct regions: elastic deformation, yield point, plastic deformation, and ultimate failure.

    • In the elastic region, the material deforms elastically and returns to its original shape when the stress is removed.

    • The yield point is where the material transi...

  • Answered by AI
  • Q2. What are gears and types of gears
  • Ans. 

    Gears are mechanical components used to transmit motion and power between rotating shafts. There are various types of gears including spur, helical, bevel, and worm gears.

    • Gears are toothed mechanical components that mesh together to transmit motion and power.

    • Spur gears have straight teeth and are the most common type of gear.

    • Helical gears have angled teeth for smoother and quieter operation.

    • Bevel gears have cone-shaped...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be prepared of your CV and basics of DME SOM and Thermodynamics and other mechanical engineering topics for answering questions if you are mentioning about programming language in resume please be prepared of that.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There were 4 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. Tell me about your project.
  • Ans. 

    I worked on a project to optimize production processes by implementing automation and improving efficiency.

    • Implemented automation systems to streamline production processes

    • Analyzed data to identify bottlenecks and inefficiencies

    • Collaborated with cross-functional teams to implement solutions

    • Improved production output by 20% within 6 months

  • Answered by AI
  • Q2. Self introduction.
  • Q3. Stress strain R15 R15 diagram.
  • Ans. 

    The stress-strain diagram for R15 material shows the relationship between stress and strain for that specific material.

    • The stress-strain diagram typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.

    • R15 material may exhibit different characteristics compared to other materials, so the specific diagram would show its unique behavior.

    • The diagram helps engineers understand...

  • Answered by AI
  • Q4. What do you mean by tolerance.
  • Ans. 

    Tolerance refers to the allowable deviation from a specified dimension or value in engineering.

    • Tolerance is important in manufacturing to ensure that parts fit together properly.

    • It is typically specified as a range, such as +/- 0.1mm.

    • Tolerance can be applied to dimensions, angles, surface finishes, and other characteristics.

    • For example, a hole may have a tolerance of +/- 0.05mm to allow for variations in the drilling p

  • Answered by AI
  • Q5. Define portrait engine diesel engine and its capacity and compression ratio.
  • Ans. 

    A portrait engine diesel engine is a type of internal combustion engine with a capacity typically ranging from 1.5L to 3.0L and a compression ratio of around 16:1.

    • Portrait engine diesel engines are commonly used in passenger cars and light-duty trucks.

    • They are known for their fuel efficiency and torque output.

    • Examples of portrait engine diesel engines include the Ford EcoBlue 2.0L and the Volkswagen TDI 1.6L.

    • The high c...

  • Answered by AI
Round 2 - Aptitude Test 

Basic questions, profit loss

Round 3 - Group Discussion 

Environment. Women empowerment smart work it is the topics of the GD.

Round 4 - Coding Test 

Basic codes. Basic in changing coding like adding subtraction loops etc.

Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
-

I applied via Campus Placement and was interviewed in Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

IT was medium level. Questions related to production was also there.

Round 3 - Group Discussion 

They asked me to speak on the topic "Impact of AI on Manufacturing"

Round 4 - One-on-one 

(2 Questions)

  • Q1. This was the final round HR. Which took place after 1.5 month in December. Started with quick Intro and them why JSW and revolved around my resume.
  • Q2. WHY JSW? PAST EXPERIENCE, HOW ARE YOU A GOOD FIT.

Interview Preparation Tips

Interview preparation tips for other job seekers - GOOD BASICS AND RESUME IS YOUR BIBLE

Vedanta Aluminium Interview FAQs

How many rounds are there in Vedanta Aluminium Production Graduate Engineer Trainee interview?
Vedanta Aluminium interview process usually has 1 rounds. The most common rounds in the Vedanta Aluminium interview process are Technical.

Tell us how to improve this page.

Vedanta Aluminium Production Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 588 Interviews
Metso Interview Questions
4.3
 • 65 Interviews
View all
Assistant Manager
721 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Manager
318 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
159 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate
104 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Controller
93 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Vedanta Aluminium with

Hindalco Industries

4.2
Compare

Nalco

4.1
Compare

Vedanta Limited

3.8
Compare

Hindustan Zinc

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview