Upload Button Icon Add office photos

Vedanta Aluminium

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Vedanta Aluminium Mechanical Engineer Interview Questions and Answers

Updated 3 Feb 2025

Vedanta Aluminium Mechanical Engineer Interview Experiences

2 interviews found

Mechanical Engineer Interview Questions & Answers

user image RAJESH KUMAR SAHU

posted on 3 Feb 2025

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Crane maintenance PM & breakdown

Interview Questionnaire 

1 Question

  • Q1. Related to mechanical equipment maintenence.

Mechanical Engineer Interview Questions Asked at Other Companies

Q1. What we need to do if pressure valve fail in boiler
Q2. What are the basic parts of an aeroplane and there working functi ... read more
asked in Tata Steel
Q3. Percentage of carbon presence in cast iron
Q4. How we cool a pipe in a chamber without using coolent
Q5. Why petrol engines comparison ratio low when compared to a diesel ... read more

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Ash handling system in thermal power plant operation & maintenance
Tips: Vaccum system

Skills: Engineering Basics

I was interviewed in Sep 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Mechanical engineer
Tips: Strong knowledge of mechanical maintenance

Round: Group Discussion
Duration: 1 hour

Skills: Mechanical Engineering Basics

I was interviewed in Jun 2017.

Interview Questionnaire 

8 Questions

  • Q1. Percentage of carbon presence in cast iron
  • Ans. 

    The percentage of carbon presence in cast iron varies from 2.1% to 6.67% depending on the type of cast iron.

    • Cast iron is classified into four types based on its carbon content: white, gray, ductile, and malleable.

    • White cast iron has the highest carbon content, ranging from 2.1% to 6.67%.

    • Gray cast iron has a lower carbon content, ranging from 2.5% to 4%.

    • Ductile cast iron has a carbon content of 3.2% to 4.1%.

    • Malleable ca...

  • Answered by AI
  • Q2. What did u mean by addendum in gears
  • Ans. 

    Addendum is the height of the tooth above the pitch circle in a gear.

    • Addendum is the distance between the pitch circle and the top of the gear tooth.

    • It is an important parameter in gear design as it affects the strength and durability of the gear.

    • The addendum can be calculated using the formula addendum = module or diametral pitch.

    • For example, in a gear with a module of 2mm, the addendum would be 2mm.

    • Addendum is the op...

  • Answered by AI
  • Q3. Least count of varnier calipers
  • Ans. 

    The least count of vernier calipers is the smallest measurement that can be accurately read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 division

  • Answered by AI
  • Q4. Tell me something about ur company where u are working ?
  • Ans. 

    I work for a leading engineering firm specializing in designing and manufacturing industrial machinery.

    • We have a team of experienced mechanical engineers who work on various projects

    • Our company focuses on innovation and cutting-edge technology in our designs

    • We have successfully completed projects for clients in the automotive and aerospace industries

  • Answered by AI
  • Q5. Tell me your family background ?
  • Ans. 

    I come from a close-knit family with a strong emphasis on education and hard work.

    • My parents are both engineers, so I grew up with a passion for problem-solving and innovation.

    • I have two siblings, one of whom is also pursuing a career in engineering.

    • Family gatherings often involve discussions about new technologies and projects we are working on.

    • My family has always been supportive of my academic and career pursuits.

  • Answered by AI
  • Q6. Tell me something about yourself ?
  • Ans. 

    I am a passionate mechanical engineer with a strong background in designing and implementing innovative solutions.

    • Graduated with a degree in Mechanical Engineering from XYZ University

    • Completed internships at ABC Company and gained hands-on experience in CAD software

    • Led a team project to design and build a prototype for a new cooling system

    • Continuously learning and staying updated on the latest industry trends and techn

  • Answered by AI
  • Q7. Why are u join this company ?
  • Ans. 

    I am joining this company because of its reputation for innovation and commitment to employee growth.

    • Opportunity to work on cutting-edge projects

    • Strong focus on professional development

    • Positive company culture and values

    • Potential for career advancement

    • Desire to contribute to a successful team

  • Answered by AI
  • Q8. Why I hire u?
  • Ans. 

    I have a strong background in mechanical engineering with hands-on experience in designing and implementing innovative solutions.

    • Extensive knowledge in mechanical engineering principles and practices

    • Proven track record of successfully completing projects on time and within budget

    • Strong problem-solving skills and ability to think creatively

    • Experience in using CAD software for design and analysis

    • Excellent communication a...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: I hv cleared

Round: HR Interview
Experience: I was narvous and rejected.

Skills: Way Of Answering
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - HR 

(6 Questions)

  • Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...
  • Ans. 

    Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...
  • Ans. 

    Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...
  • Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...
  • Ans. 

    Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
  • Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - HR 

(4 Questions)

  • Q1. Why do you wanna join here.
  • Q2. How does engine work
  • Ans. 

    An engine works by converting fuel into mechanical energy through a series of combustion and mechanical processes.

    • Engines typically have cylinders where fuel is ignited and combustion occurs.

    • The combustion process creates high-pressure gases that push pistons, which in turn rotate the crankshaft.

    • The crankshaft converts the linear motion of the pistons into rotational motion.

    • This rotational motion is then transferred to...

  • Answered by AI
  • Q3. Function of flywheel
  • Ans. 

    A flywheel is a mechanical device used to store rotational energy and provide stability to a system.

    • Stores kinetic energy and releases it when needed

    • Maintains rotational momentum

    • Provides stability and smooth operation

    • Used in various applications like engines, power plants, and energy storage systems

  • Answered by AI
  • Q4. Steel types and explain all
  • Ans. 

    Steel types are classified based on their composition and properties.

    • Carbon Steel: Contains primarily carbon and iron. Examples include low carbon steel, medium carbon steel, and high carbon steel.

    • Alloy Steel: Contains additional elements such as manganese, nickel, chromium, or molybdenum to enhance properties. Examples include stainless steel, tool steel, and high-strength low-alloy steel.

    • Stainless Steel: Contains a m...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just do your best.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 4 interview rounds.

Round 1 - Group Discussion 

Gearbox and fluid coupling replacement work and development

Round 2 - Assignment 

Senior manager and manager and all employees job description for growth and development

Round 3 - Case Study 

Cash study in machanical engineering decision making thermodynamics fluid machanics and heat transfer

Round 4 - HR 

(11 Questions)

  • Q1. Gear box replacement work safely first and all ppes sure and paper work and try out checking and saving and job work clean and fresh and tackup up and clamping conveyer belt old gear box replacement for ne...
  • Q2. Barring checking and replacement work and safety first and all ppes sure and paper work and try out sure and teckup up and clamping conveyer belt and plummer block top cover open Barring checking and remov...
  • Q3. Conveyer belt pmi roller checking work and safety first and all ppes sure and paper work and walked away clean and fresh and Roller cut marking frem number and belt tracking and belt close and try out sure...
  • Q4. Barring greasing work and safety first and all ppes sure and paper work and conveyer belt running and walked away clean and fresh and grease gun and greasing work
  • Q5. Conveyer belt panching work and safety first and all ppes sure and paper work and try out same position and solution and hardner bad mixed mad belt panching work
  • Q6. Conveyer belt chute replacement work and safety first and all ppes sure and paper work and try out and jobs walked away clean and fresh and same chute replace and tightening bolt and machine welding and fi...
  • Q7. Conveyer belt v-scraper replacement work and safety first and all ppes sure and paper work belt close and try out and walked away from clean and fresh and same v -scraper making and replacement work
  • Q8. Gear box old oil replacement work and safety first and all ppes sure and paper work and belt close and try out and walked away clean and fresh and oil gauge and checking and drain oil and Aw320 oil replac...
  • Q9. Fluid coupling oil replacement work and safety first and all ppes sure and paper work and try out lockout and tagout (loto) safety procedure and fuse plug and open west oil remove and new aw46oil replacem...
  • Q10. Drive pmi work and safety first and all ppes sure and paper work and try out ofter walked away clean and fresh and bass bolt nut tightening work
  • Q11. Gear box cleaning work and safety first and all ppes sure and paper work and walked away clean and fresh and ty out sure and clean and fresh and same process paper work cancelled and conveyer belt running...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement

Interview Questionnaire 

2 Questions

  • Q1. Technical Mechanical Work
  • Q2. Fire Safety course complete profile

Interview Preparation Tips

Interview preparation tips for other job seekers - Ek baar hume bhi moka de kuch karne ka kuch banne ka
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Aptitude Test 

Individual skill, activities

Interview Preparation Tips

Topics to prepare for Jindal Steel and Power Mechanical Engineer interview:
  • Material Testing
  • Basic knowledge
Interview preparation tips for other job seekers - Uploaded you resume for any company
Contribute & help others!
anonymous
You can choose to be anonymous

Vedanta Aluminium Interview FAQs

How many rounds are there in Vedanta Aluminium Mechanical Engineer interview?
Vedanta Aluminium interview process usually has 1 rounds. The most common rounds in the Vedanta Aluminium interview process are Group Discussion.

Recently Viewed

INTERVIEWS

Vedanta Aluminium

No Interviews

INTERVIEWS

Calderys India Refractories

No Interviews

INTERVIEWS

Vedanta Aluminium

No Interviews

INTERVIEWS

Coherent Market Insights

No Interviews

INTERVIEWS

Calderys India Refractories

No Interviews

INTERVIEWS

Vedanta Aluminium

No Interviews

INTERVIEWS

Calderys India Refractories

No Interviews

INTERVIEWS

Calderys India Refractories

No Interviews

INTERVIEWS

Calderys India Refractories

No Interviews

INTERVIEWS

Vedanta Aluminium

No Interviews

Tell us how to improve this page.

Vedanta Aluminium Mechanical Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Vedanta Aluminium Mechanical Engineer Salary
based on 21 salaries
₹2.8 L/yr - ₹9 L/yr
At par with the average Mechanical Engineer Salary in India
View more details

Vedanta Aluminium Mechanical Engineer Reviews and Ratings

based on 6 reviews

4.5/5

Rating in categories

3.2

Skill development

3.6

Work-life balance

3.1

Salary

4.2

Job security

3.5

Company culture

3.4

Promotions

3.4

Work satisfaction

Explore 6 Reviews and Ratings
Assistant Manager
721 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Manager
319 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
158 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate
95 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Controller
95 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Vedanta Aluminium with

Hindalco Industries

4.2
Compare

Nalco

4.2
Compare

Vedanta Limited

3.8
Compare

Hindustan Zinc

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent