Upload Button Icon Add office photos

Vedanta Aluminium

Compare button icon Compare button icon Compare

Filter interviews by

Vedanta Aluminium Graduate Trainee Interview Questions and Answers

Updated 12 May 2024

Vedanta Aluminium Graduate Trainee Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

20 morks of aptitude test was there in first round and 60% is qualified mark.

Round 2 - HR 

(3 Questions)

  • Q1. Questions regarding mining, Alumina and aluminum, process of production on aluminum, basic chemistry, basic physics and educational background.
  • Q2. Some questions regarding your personal background.
  • Q3. Personality test

Interview Preparation Tips

Interview preparation tips for other job seekers - ●If you are a BSc graduate then you will have to go through only 2 round (1st- aptitude test, 2nd- HR interview).

●If you are an engineer then you have to go through 4 round.
1. Aptitude test
2. Technical interview
3. Group Discussion
4. HR interview

Best of luck 👍

I applied via Campus Placement and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. 1) What is stress and strain?
  • Ans. 

    Stress is the force applied to a material, while strain is the resulting deformation or change in shape.

    • Stress is a measure of the internal forces within a material that resist deformation.

    • Strain is the measure of the amount of deformation or change in shape that occurs due to stress.

    • Stress and strain are related through the material's elastic properties.

    • For example, when a rubber band is stretched, stress is applied t...

  • Answered by AI
  • Q2. 2)Tell Newton's 3 laws of motion?
  • Ans. 

    Newton's 3 laws of motion describe the relationship between an object and the forces acting upon it.

    • First law: An object at rest will remain at rest, and an object in motion will remain in motion at a constant velocity, unless acted upon by an external force.

    • Second law: The acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass.

    • Third law: For every action, ...

  • Answered by AI
  • Q3. 3)What are your hobbies?
  • Q4. 4)Tell us what you know about the company?
  • Q5. 5)Can you work in the industrial atmosphere in high temperature?
  • Ans. 

    Yes, I am comfortable working in high temperature industrial atmosphere.

    • I have experience working in a factory with high temperature machinery.

    • I am aware of the safety precautions and measures to be taken in such an environment.

    • I am physically fit and able to work in such conditions.

    • I am willing to wear appropriate protective gear to ensure my safety.

    • I am confident that I can adapt to the working conditions and perform

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall experience was good.

Graduate Trainee Interview Questions Asked at Other Companies

asked in Flipkart
Q1. Given an array, how do you get the count of pairs that sum to eve ... read more
asked in Freshworks
Q2. Invert a Binary Tree You are provided with a Binary Tree and one ... read more
asked in Freshworks
Q3. Merge Two Sorted Arrays Problem Statement Given two sorted intege ... read more
asked in Freshworks
Q4. Deepest Left Leaf Node Problem Statement You are provided with a ... read more
asked in TCS
Q5. Consonant Counting Problem Statement Given a string STR comprisin ... read more

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Sep 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic Science Questions. 10th 12th Graduation level.

Round 3 - One-on-one 

(2 Questions)

  • Q1. Self introduction and Graduation specialisation Questions.
  • Q2. What is your favourite topic in optics???
  • Ans. 

    My favorite topic in optics is the study of light-matter interactions.

    • I am fascinated by how light interacts with different materials and how it can be manipulated to achieve specific outcomes.

    • I am particularly interested in the field of photonics and how it is being used to develop new technologies such as optical computing and quantum communication.

    • I enjoy learning about the different types of optical materials and h...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep moving towards your goal and do everything by heart. Be dedicated towards goal.
All the best to everyone!!
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Basic Questions of Commerce

Round 2 - Behavioral 

(2 Questions)

  • Q1. Explain Company Balance as per Companies Act,2013
  • Ans. 

    Company balance as per Companies Act, 2013 refers to the financial statement showing the assets, liabilities, and equity of a company.

    • Company balance is prepared annually by companies to provide a snapshot of their financial position.

    • It includes assets (such as cash, inventory, property), liabilities (such as loans, accounts payable), and equity (ownership stake).

    • The balance sheet must adhere to the format and disclosu...

  • Answered by AI
  • Q2. Describe Working Capital
  • Ans. 

    Working capital is the difference between current assets and current liabilities in a company.

    • Working capital is essential for day-to-day operations of a business

    • It indicates the company's ability to meet short-term obligations

    • Formula: Working Capital = Current Assets - Current Liabilities

    • Examples of current assets: cash, accounts receivable, inventory

    • Examples of current liabilities: accounts payable, short-term loans

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the process of heat treatment
  • Ans. 

    Heat treatment is a process used to alter the physical and mechanical properties of materials through heating and cooling.

    • Heat treatment involves heating the material to a specific temperature

    • The material is held at that temperature for a certain period of time

    • The material is then cooled at a controlled rate

    • Different heat treatment techniques include annealing, tempering, quenching, and case hardening

    • Heat treatment can...

  • Answered by AI
  • Q2. What is latent heat
  • Ans. 

    Latent heat is the heat energy absorbed or released during a phase change without a change in temperature.

    • Latent heat is the energy required to change the state of a substance without changing its temperature.

    • It is the heat energy absorbed or released during processes like melting, boiling, or condensation.

    • During phase changes, the energy is used to break or form intermolecular bonds.

    • For example, when ice melts into wa...

  • Answered by AI
  • Q3. What is turbulence
  • Ans. 

    Turbulence is a chaotic and unpredictable flow of fluid or air characterized by irregular changes in velocity and pressure.

    • Turbulence occurs when the flow of a fluid or air becomes unstable and exhibits random fluctuations.

    • It is often observed in natural phenomena such as wind, water currents, and atmospheric conditions.

    • Turbulent flow is characterized by eddies, vortices, and rapid changes in velocity and pressure.

    • It c...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic idea must be clear
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

The test was easy and the technical questions were also basic

Round 2 - Technical 

(4 Questions)

  • Q1. Most questions were about my final year project and resume. Prepare technical concepts mentioned in your resume.
  • Q2. Loads considered, material properties in my fyp
  • Ans. 

    Understanding the loads considered and material properties in my final year project.

    • Considered loads include static, dynamic, and impact loads

    • Material properties such as strength, stiffness, and ductility are crucial for design

    • Testing methods like tensile testing and impact testing are used to determine material properties

    • Examples: analyzing the load distribution on a bridge structure, selecting materials for a car bum

  • Answered by AI
  • Q3. Cycle of Internal combustion engine and also all the components
  • Ans. 

    The cycle of an internal combustion engine involves intake, compression, power, and exhaust strokes.

    • Intake: Air and fuel mixture is drawn into the cylinder

    • Compression: The mixture is compressed by the piston

    • Power: The spark plug ignites the mixture, causing an explosion and pushing the piston down

    • Exhaust: The exhaust gases are expelled from the cylinder

  • Answered by AI
  • Q4. Diesel cycle, stress ,strain, resilience and toughness
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

Apti, quant and general

Round 2 - Group Discussion 

Impact of pollution over environment

Round 3 - Technical 

(1 Question)

  • Q1. MECHANICAL RELATED
Round 4 - HR 

(1 Question)

  • Q1. GENERAL HR ROUND
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Group Discussion 

They give the topic spontaneous to explore the some words the topic

Round 2 - Case Study 

A detailed information about person, situation over a period of time.

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Aptitude Test 

Topics include aptitude basic engineering concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare your basics well and work on communicating in a way that convince them that this person can learn things and convey things.
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(3 Questions)

  • Q1. What is relay ?
  • Ans. 

    A relay is an electrically operated switch that uses an electromagnet to mechanically operate a switch.

    • Relays are used to control high power circuits with low power signals, such as in automotive applications.

    • They can be used to control multiple circuits with a single signal.

    • Relays are commonly used in industrial automation, telecommunications, and power systems.

    • Examples of relays include electromagnetic relays, solid-

  • Answered by AI
  • Q2. What is mcv and RCB
  • Q3. Pressureand temperature?

Interview Preparation Tips

Interview preparation tips for other job seekers - Training

Vedanta Aluminium Interview FAQs

How many rounds are there in Vedanta Aluminium Graduate Trainee interview?
Vedanta Aluminium interview process usually has 2 rounds. The most common rounds in the Vedanta Aluminium interview process are Aptitude Test and HR.
What are the top questions asked in Vedanta Aluminium Graduate Trainee interview?

Some of the top questions asked at the Vedanta Aluminium Graduate Trainee interview -

  1. 1) What is stress and stra...read more
  2. 5)Can you work in the industrial atmosphere in high temperatu...read more
  3. 2)Tell Newton's 3 laws of moti...read more

Tell us how to improve this page.

Vedanta Aluminium Graduate Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Vedanta Aluminium Graduate Trainee Salary
based on 23 salaries
₹3 L/yr - ₹6.5 L/yr
21% more than the average Graduate Trainee Salary in India
View more details

Vedanta Aluminium Graduate Trainee Reviews and Ratings

based on 20 reviews

3.2/5

Rating in categories

3.2

Skill development

2.4

Work-life balance

3.6

Salary

3.4

Job security

2.5

Company culture

2.7

Promotions

2.5

Work satisfaction

Explore 20 Reviews and Ratings
Assistant Manager
721 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Manager
319 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
158 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate
95 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Controller
95 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Vedanta Aluminium with

Hindalco Industries

4.2
Compare

Nalco

4.1
Compare

Vedanta Limited

3.8
Compare

Hindustan Zinc

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview