Upload Button Icon Add office photos

VE Commercial Vehicles

Compare button icon Compare button icon Compare

Filter interviews by

VE Commercial Vehicles Service Technician Interview Questions and Answers

Updated 23 Jun 2024

VE Commercial Vehicles Service Technician Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic electrical
  • Q2. Basic pneumatic
Round 2 - HR 

(2 Questions)

  • Q1. Previous company left reason
  • Ans. 

    Left previous company due to relocation for family reasons

    • Relocated to a different city to be closer to family

    • Needed to prioritize family commitments over job location

    • Wanted to create a better work-life balance by moving closer to family

  • Answered by AI
  • Q2. How much u expect

I applied via Recruitment Consultant and was interviewed in Nov 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Commercial heavy vehicle service
  • Q2. Service step
  • Q3. What process flywheel cheek?
  • Ans. 

    Flywheel cheek is a process used in service technician work.

    • Flywheel cheek is a procedure to inspect and evaluate the condition of the flywheel cheek surface.

    • It involves checking for any signs of wear, damage, or unevenness on the flywheel cheek.

    • The process may include cleaning the flywheel cheek, measuring its thickness, and determining if it needs resurfacing or replacement.

    • Service technicians use specialized tools a...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Commercial vehicle heavy vehicle service and official paper

Service Technician Interview Questions Asked at Other Companies

Q1. can you tell me something about 3 phase and songle phase supply
Q2. Fuse is very economical then why we use MCB in place of fuse
Q3. How many nuts are therein the alloy wheel of a ola scooter?
Q4. How many spokes are there in the front alloy wheel of Ola scooter ... read more
asked in Bounce
Q5. If a bike has a starting trable wt u will check first

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

Interview Preparation Tips

Round: Technical Interview
Experience: "I was only questioned on my resume,
-internship
-contribution to college through extra curriculars
-personal opinion based questions based on information I provided

ps: they laid stress on a good pointer for shortlisting for interview then on extra curricular activities for selection."

General Tips: "prepartion for campus begins as early as the begining of 2nd year.

please feel free to mail / call for any help.

All the Best.
"
College Name: Veermata Jijabai Technological Institute, Mumbai [ VJTI ]

I applied via Company Website and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Why should we hire you?
  • Q2. I am good work experience this field.11 years
Round 2 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - I am good work experience 11 years automobile sales job

I applied via Approached by Company and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How are engine starting process.
  • Ans. 

    The engine starting process involves several steps to ignite the fuel and air mixture in the engine cylinders.

    • The ignition key is turned to the 'on' position, which activates the fuel pump and other electrical components.

    • The starter motor engages the flywheel, which turns the engine over.

    • Fuel is injected into the cylinders and mixed with air.

    • The spark plugs ignite the fuel and air mixture, causing combustion and starti...

  • Answered by AI
  • Q2. Engine working principal

Interview Preparation Tips

Interview preparation tips for other job seekers - Completely work from interview

I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 5 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Are you aware about electronics Architectures of Commercial Vehicles ?
  • Ans. 

    Yes, I am aware of electronics architectures of commercial vehicles.

    • I have experience working with CAN (Controller Area Network) bus systems.

    • I am familiar with the various electronic control units (ECUs) used in commercial vehicles.

    • I understand the importance of proper wiring and grounding in electronic systems.

    • I have knowledge of diagnostic tools and software used for troubleshooting electronic issues.

    • I am aware of th...

  • Answered by AI
  • Q2. Why required brake in Vehicles ?
  • Ans. 

    Brakes are required in vehicles to slow down or stop the vehicle when necessary.

    • Brakes help to prevent accidents by allowing the driver to slow down or stop the vehicle when necessary

    • They also help to maintain control of the vehicle while driving

    • Different types of brakes include disc brakes, drum brakes, and anti-lock brakes

    • Regular maintenance of brakes is important to ensure they are functioning properly

  • Answered by AI
  • Q3. What is Ackerman angle ?
  • Ans. 

    Ackerman angle is the angle formed between the steering axis and a line drawn through the center of the wheel.

    • It is used in the design of steering systems for vehicles.

    • It helps to determine the turning radius of a vehicle.

    • The angle varies depending on the type of vehicle and its intended use.

    • A larger Ackerman angle is used for vehicles that require tighter turning radius, such as go-karts.

    • A smaller Ackerman angle is us...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - As per Ashok Leyland company engineer should be technical sound and expert in Vehicles engineer.

I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Goals and ambitions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for technical round

I applied via Referral and was interviewed before May 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical about BS4 and BS6 vehicles, About SAP system

Interview Preparation Tips

Interview preparation tips for other job seekers - Be cool and confidence on your answer dont panic in any questions

VE Commercial Vehicles Interview FAQs

How many rounds are there in VE Commercial Vehicles Service Technician interview?
VE Commercial Vehicles interview process usually has 2 rounds. The most common rounds in the VE Commercial Vehicles interview process are Technical and HR.
How to prepare for VE Commercial Vehicles Service Technician interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at VE Commercial Vehicles. The most common topics and skills that interviewers at VE Commercial Vehicles expect are Infrastructure Management, JBPM, Outlook and PBX.
What are the top questions asked in VE Commercial Vehicles Service Technician interview?

Some of the top questions asked at the VE Commercial Vehicles Service Technician interview -

  1. What process flywheel chee...read more
  2. Previous company left rea...read more
  3. Commercial heavy vehicle serv...read more

Tell us how to improve this page.

VE Commercial Vehicles Service Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 1k Interviews
Maruti Suzuki Interview Questions
4.2
 • 599 Interviews
Bajaj Auto Interview Questions
3.9
 • 273 Interviews
Ashok Leyland Interview Questions
4.1
 • 248 Interviews
Royal Enfield Interview Questions
4.2
 • 157 Interviews
Ford Motor Interview Questions
4.3
 • 149 Interviews
Honda Interview Questions
4.2
 • 100 Interviews
View all
VE Commercial Vehicles Service Technician Salary
based on 77 salaries
₹2.2 L/yr - ₹6 L/yr
26% more than the average Service Technician Salary in India
View more details

VE Commercial Vehicles Service Technician Reviews and Ratings

based on 33 reviews

4.6/5

Rating in categories

4.7

Skill development

4.3

Work-life balance

4.1

Salary

4.3

Job security

4.6

Company culture

4.1

Promotions

4.4

Work satisfaction

Explore 33 Reviews and Ratings
Junior Manager
1.6k salaries
unlock blur

₹2.2 L/yr - ₹8.4 L/yr

Deputy Manager
1.3k salaries
unlock blur

₹6.2 L/yr - ₹19.5 L/yr

Assistant Manager
912 salaries
unlock blur

₹3.8 L/yr - ₹10.9 L/yr

Manager
245 salaries
unlock blur

₹10 L/yr - ₹28 L/yr

Channel Sales Manager
243 salaries
unlock blur

₹5.8 L/yr - ₹15.7 L/yr

Explore more salaries
Compare VE Commercial Vehicles with

Tata Motors

4.2
Compare

Maruti Suzuki

4.2
Compare

Ashok Leyland

4.1
Compare

Hyundai Motor India Limited

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview