Add office photos
Filter interviews by
Unified Power Quality Engineer Interview Questions, Process, and Tips
Unified Power Quality Engineer Interview Experiences
1 interview found
Apsar Alam
I applied via Referral and was interviewed in Aug 2022. There were 2 interview rounds.
(6 Questions)
- Q1. How many types of NDT inspection.
- Ans.
There are several types of NDT inspections used in various industries.
Non-destructive testing (NDT) is a method used to evaluate the properties of a material, component, or system without causing damage.
Some common types of NDT inspections include visual inspection, ultrasonic testing, magnetic particle testing, liquid penetrant testing, radiographic testing, and eddy current testing.
Visual inspection involves the dire...
- Q2. How many types of welding postion.
- Ans.
There are four main types of welding positions: flat, horizontal, vertical, and overhead.
Flat position: Welding is done on a horizontal surface.
Horizontal position: Welding is done on a vertical surface, with the weld axis in a horizontal plane.
Vertical position: Welding is done on a vertical surface, with the weld axis in a vertical plane.
Overhead position: Welding is done on the underside of a horizontal surface.
- Q3. What is the root gap.
- Ans.
The root gap refers to the distance between the root faces of two adjacent welds.
The root gap is an important parameter in welding as it affects the quality and strength of the weld joint.
It is measured as the distance between the root faces of the two base metals that are being joined together.
The root gap should be properly controlled to ensure proper penetration of the weld metal and to avoid defects like lack of fu...
- Q4. How many types of welding electrode.
- Ans.
There are various types of welding electrodes used in different welding processes.
Welding electrodes are classified based on their composition, coating, and current type.
Common types of welding electrodes include E6010, E7018, and E308L.
Different electrodes are used for specific applications such as mild steel, stainless steel, and aluminum welding.
Some electrodes are designed for specific welding processes like shield...
- Q5. How many types of panatrameter in Radiography.
- Ans. Two types Hole type Wire type.
- Q6. How much density in RT film
- Ans.
The density of RT film refers to its mass per unit volume.
Density is a measure of how much mass is contained in a given volume.
In the case of RT film, density is typically expressed in grams per cubic centimeter (g/cm³).
The density of RT film can vary depending on factors such as the specific material used and the manufacturing process.
Density is an important property to consider in quality control as it can impact the...
Interview Preparation Tips
- ASNT Level II
- ISO 9001-2015
Interview questions from similar companies
Anonymous
I applied via Referral and was interviewed in Mar 2024. There were 2 interview rounds.
(3 Questions)
- Q1. What the reason of cube failure, if all materials are good?
- Ans.
Possible reasons for cube failure despite good materials
Improper mixing of materials
Incorrect curing process
Inadequate compaction of concrete
Presence of air voids or impurities
Poor quality control during manufacturing
- Q2. Which test conduct after cube test?
- Ans.
Compression test is conducted after cube test to determine the compressive strength of concrete.
Compression test is conducted to determine the compressive strength of concrete.
It involves applying a gradually increasing load to the concrete specimen until failure.
The results of the compression test help in assessing the quality of the concrete mix and its ability to withstand compressive forces.
Compression test is an i...
- Q3. How many Quantity of cement use in M35 grade concrete
- Ans.
The quantity of cement used in M35 grade concrete varies depending on the mix design and specifications.
The quantity of cement in M35 grade concrete typically ranges from 360 to 420 kg/m3.
The exact amount of cement needed can be calculated using the mix design provided for the project.
Factors such as water-cement ratio, aggregate size, and admixtures also influence the quantity of cement required.
(1 Question)
- Q1. Personal information And general questions
Quality Engineer Interview Questions & Answers
Waaree Energies
Dhvanil Kayadth
posted on 28 Jun 2024
I applied via Campus Placement
General aptitude online test
(2 Questions)
- Q1. Tell me about your project
- Q2. What is renewable energies
- Ans.
Renewable energies are sources of energy that are replenished naturally and can be used repeatedly without running out.
Renewable energies come from sources such as sunlight, wind, rain, tides, waves, and geothermal heat.
They are sustainable and environmentally friendly alternatives to fossil fuels.
Examples include solar power, wind power, hydropower, and biomass.
Renewable energies help reduce greenhouse gas emissions a
Selected
I applied via Campus Placement and was interviewed in May 2024. There was 1 interview round.
(1 Question)
- Q1. Introduction fo me
Raviteja Mekiri
Selected
I applied via Naukri.com and was interviewed in Jun 2023. There were 4 interview rounds.
(2 Questions)
- Q1. She is asking to my post company details and package details?
- Q2. What is your role in post company & your expectation salary ?
(2 Questions)
- Q1. What is gel test process?
- Ans.
Gel test process is a method used to analyze the physical and chemical properties of a gel material.
Gel test process involves preparing a sample of the gel material.
The sample is then subjected to various tests such as viscosity measurement, gel strength testing, and chemical analysis.
The results of the gel test process help in determining the quality and performance of the gel material.
Example: Gel test process can be...
- Q2. What is adhesion test & peel test process?
- Ans.
Adhesion test is a method to measure the strength of adhesion between two materials, while peel test is a method to measure the force required to peel two materials apart.
Adhesion test involves applying a force to separate two materials bonded together and measuring the force required to do so.
Peel test specifically measures the force required to peel two materials apart at a specified angle.
Both tests are commonly use...
B.tech in (ECE ) Electronics and Communication Engineering
Interview Preparation Tips
About your personal details.
(3 Questions)
- Q1. About your company reviews
- Q2. What was your company environment
- Q3. What was about your company's training
Selected
I applied via Company Website and was interviewed before Apr 2023. There was 1 interview round.
(3 Questions)
- Q1. About Wires,Terminal,Crimping
- Q2. Types of wires. Colors of wires
- Ans.
Types of wires include solid, stranded, and braided wires. Colors of wires vary depending on their purpose and industry standards.
Types of wires: solid, stranded, braided
Colors of wires vary by industry standards
Common wire colors: black, red, blue, green, white, yellow
- Q3. About crimping. About Connector
Interview Preparation Tips
Interview Questionnaire
5 Questions
- Q1. What is bulk density ?
- Ans.
Bulk density refers to the mass of a substance per unit volume, excluding any voids or air spaces.
It is a measure of how densely packed the particles or molecules are in a given volume.
Bulk density is commonly used in industries such as mining, agriculture, and pharmaceuticals.
It is calculated by dividing the mass of the substance by its volume.
For example, the bulk density of a soil sample can indicate its compaction ...
- Q2. Bulk density is the wet soil weight/volume.
- Q3. What is target mean strength? ?
- Ans.
Target mean strength is the desired strength level of a product or material.
It is the strength level that a product or material is designed to meet or exceed.
It is determined based on the intended use and expected stresses on the product or material.
It is often used in quality control to ensure that products meet the desired strength level.
For example, the target mean strength of a steel beam used in construction may b...
- Q4. Target mean strength is Caracterstrict strength+1.65multiply standard deviation.
- Q5. How many types of brick test and is code?
- Ans.
There are several types of brick tests and corresponding IS codes.
Compressive strength test (IS code: IS 3495 Part 1)
Water absorption test (IS code: IS 3495 Part 2)
Efflorescence test (IS code: IS 3495 Part 3)
Dimensional tolerance test (IS code: IS 3495 Part 4)
Warpage test (IS code: IS 3495 Part 5)
Soundness test (IS code: IS 3495 Part 6)
Density test (IS code: IS 3495 Part 7)
I applied via Campus Placement and was interviewed in Nov 2020. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. Related Thermal power plant engineering and welding technology
Interview Preparation Tips
1.Objective test
2.Technical round
3.HR round
(1 Question)
- Q1. Spc , MSA 7qc tools etc
(2 Questions)
- Q1. How many salary expected.
- Ans.
The expected salary for a Quality Engineer position depends on factors such as experience, location, and company size.
Research average salaries for Quality Engineers in your area to get an idea of the market rate.
Consider your level of experience and any specialized skills that may warrant a higher salary.
Factor in the size and industry of the company, as well as any additional benefits or perks offered.
Be prepared to ...
- Q2. Why you Live yours pri.company
- Ans.
I live my pri.company because of the challenging work environment, opportunities for growth, and supportive team.
Challenging work environment keeps me motivated and engaged
Opportunities for growth and advancement in my career
Supportive team that encourages collaboration and success
Unified Power Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Quality Inspector Interview Questions
- Senior Quality Engineer Interview Questions
- Quality Controller Interview Questions
- Quality Assurance Interview Questions
- Quality Manager Interview Questions
- Quality Executive Interview Questions
- Quality Assurance Officer Interview Questions
- Executive Quality Assurance Interview Questions
- Show more
People are getting interviews through
Quality Engineer Interview Questions from Similar Companies
|
Site Engineer Mechanical
4
salaries
|  ₹1.8 L/yr - ₹4 L/yr |
|
Project Engineer
3
salaries
| ₹2.6 L/yr - ₹3.6 L/yr |
|
Maintenance Engineer
3
salaries
| ₹2.4 L/yr - ₹4.2 L/yr |
|
Safety Officer
3
salaries
| ₹2.4 L/yr - ₹3.6 L/yr |
Jakson Group
ReNew
Vestas
Wind World
Calculate your in-hand salary
- Home >
- Interviews >
- Unified Power Interview Questions >
- Unified Power Quality Engineer Interview Questions
