Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by TVS Sundram Fasteners Team. If you also belong to the team, you can get access from here

TVS Sundram Fasteners Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

TVS Sundram Fasteners Production Interview Questions and Answers

Updated 18 Jan 2025

TVS Sundram Fasteners Production Interview Experiences

1 interview found

Production Interview Questions & Answers

user image Anonymous

posted on 16 Jan 2025

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Ho no yuvaraj sir no yuvaraj sir
  • Q2. Yuvaraj sir no yuvaraj sir hoo no va paa

Interview Preparation Tips

Interview preparation tips for other job seekers - Oho yuvaraj sir hoo no yuvaraj

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. About small press machine.
  • Q2. What is fixed stroke.
  • Ans. 

    Fixed stroke refers to a consistent and unchanging distance that a mechanical component moves during each cycle.

    • Fixed stroke is a term commonly used in production and manufacturing.

    • It refers to the predetermined and unchanging distance that a mechanical component moves during each cycle.

    • This distance is fixed and does not vary.

    • For example, in a piston engine, the stroke length of the piston is fixed and determines the ...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Self introduction
  • Q2. Technical questions
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. Technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good interview experience if we fail in that interview also we can get good confidence
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. Explain about past company?
  • Ans. I worked in production supervisor and my role is produced the good quality material and on time dispatch.
  • Answered Anonymously
  • Q2. Which document your using?
  • Ans. I am using ERP and excell.
  • Answered Anonymously
  • Q3. What is your work in past company?
  • Ans. I am worked in 2 years GET in hundai sub contractor. And production supervisor in manufacturing company in sunkid electro system.
  • Answered Anonymously
  • Q4. How to improve the production?
  • Ans. 

    Improving production can be achieved by optimizing processes, increasing efficiency, and reducing waste.

    • Implement lean manufacturing principles to streamline operations

    • Invest in automation technology to increase productivity

    • Regularly analyze production data to identify bottlenecks and areas for improvement

    • Train employees on best practices and provide opportunities for continuous learning

    • Collaborate with suppliers to im

  • Answered by AI
  • Q5. Who is supplier in past company?
  • Ans. Alhelia swich gear, bhel, alfanar switch gear
  • Answered Anonymously
Round 2 - HR 

(1 Question)

  • Q1. Self introduction
  • Ans. My name is N.Ajithkumar coming for Sriperumbudur .I have completed B.E mechanical engineering post out 2020 I studied MRK institute of technology at kattumannarkoil and Anna University. I have working experiences 3 years . I have working history 2 year nvh India autopart private limited work in sub contractor Hyundai in ( GET - Graduate Engineer trainee) perform headlines with roof wire assembly and qc inspection.fo...
  • Answered Anonymously
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Assembly BIW production process and their required parameter to meet weld quality
  • Ans. 

    Assembly BIW production process involves various parameters to ensure weld quality.

    • Ensure proper fit-up of components before welding

    • Maintain correct welding parameters such as voltage, current, and travel speed

    • Use appropriate shielding gas and welding consumables

    • Regularly inspect and maintain welding equipment

    • Implement quality control measures such as visual inspection and non-destructive testing

  • Answered by AI
  • Q2. Robotic spot welding knowledge
Round 2 - HR 

(1 Question)

  • Q1. CTC discuss and policy

Interview Preparation Tips

Interview preparation tips for other job seekers - average ok company , not so good
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Explain project
  • Ans. 

    The project involved designing and implementing a new production process to improve efficiency and reduce costs.

    • Identify areas for improvement in current production process

    • Research and analyze different production methods and technologies

    • Design and implement new production process

    • Test and optimize the new process for efficiency and cost-effectiveness

  • Answered by AI
  • Q2. Explain overcoming
  • Ans. 

    Overcoming is the act of successfully dealing with or overcoming a challenge, obstacle, or difficulty.

    • Identifying the challenge or obstacle

    • Developing a plan or strategy to address it

    • Taking action to implement the plan

    • Persisting through setbacks or failures

    • Learning from the experience to improve future outcomes

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Tpm @ 7qc tolls
  • Q2. Audit
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Related experience
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is five...?
  • Ans. 

    Five is a numerical value representing the quantity of five items.

    • Five is the third prime number.

    • There are five fingers on a human hand.

    • A pentagon has five sides.

    • A standard dice has five dots on one side.

  • Answered by AI
  • Q2. Man, machine, method, materials & Measurement
  • Q3. What is five.... S
  • Ans. 

    Five S is a mnemonic used in the oil and gas industry to remember the key steps in drilling a well.

    • Safety - prioritize safety measures to prevent accidents

    • Survey - conduct a survey to determine the best location for drilling

    • Spud - begin drilling the well

    • Set casing - install casing to stabilize the wellbore

    • Squeeze - perform cement squeeze to seal off any leaks

  • Answered by AI
  • Q4. Short, store, shine, standerize & sustain
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Types of engine
  • Ans. 

    Types of engines include internal combustion engines, steam engines, and electric engines.

    • Internal combustion engines: Most common type, fueled by gasoline or diesel (e.g. car engines)

    • Steam engines: Use steam to generate power (e.g. steam locomotives)

    • Electric engines: Powered by electricity (e.g. electric vehicles)

  • Answered by AI
  • Q2. How many engines are used in our company
  • Ans. 

    The company uses a total of 5 engines for production purposes.

    • There are 3 engines used for manufacturing equipment

    • There is 1 engine used for transportation vehicles

    • There is 1 backup engine in case of emergencies

  • Answered by AI

TVS Sundram Fasteners Interview FAQs

How many rounds are there in TVS Sundram Fasteners Production interview?
TVS Sundram Fasteners interview process usually has 1 rounds. The most common rounds in the TVS Sundram Fasteners interview process are Technical.
What are the top questions asked in TVS Sundram Fasteners Production interview?

Some of the top questions asked at the TVS Sundram Fasteners Production interview -

  1. Ho no yuvaraj sir no yuvaraj ...read more
  2. Yuvaraj sir no yuvaraj sir hoo no va ...read more

Tell us how to improve this page.

TVS Sundram Fasteners Production Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 266 Interviews
Exide Industries Interview Questions
3.5
 • 168 Interviews
UNO Minda Interview Questions
4.0
 • 168 Interviews
Subros Interview Questions
3.9
 • 167 Interviews
Ceat Tyres Interview Questions
4.0
 • 161 Interviews
Apollo Tyres Interview Questions
4.0
 • 129 Interviews
Spark Minda Interview Questions
3.9
 • 122 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
View all
TVS Sundram Fasteners Production Salary
based on 11 salaries
₹1.5 L/yr - ₹2.5 L/yr
46% less than the average Production Salary in India
View more details

TVS Sundram Fasteners Production Reviews and Ratings

based on 8 reviews

3.4/5

Rating in categories

3.6

Skill development

2.8

Work-life balance

2.7

Salary

2.8

Job security

3.0

Company culture

2.8

Promotions

3.9

Work satisfaction

Explore 8 Reviews and Ratings
Assistant Manager
270 salaries
unlock blur

₹5.1 L/yr - ₹12.3 L/yr

Trainee
225 salaries
unlock blur

₹1.1 L/yr - ₹3 L/yr

Senior Executive
221 salaries
unlock blur

₹3.9 L/yr - ₹8.1 L/yr

Executive
221 salaries
unlock blur

₹2.3 L/yr - ₹6.5 L/yr

Quality Inspector
198 salaries
unlock blur

₹1 L/yr - ₹3 L/yr

Explore more salaries
Compare TVS Sundram Fasteners with

Precision Fasteners

4.5
Compare

Lakshmi Precision Screws

4.2
Compare

Caparo Engineering India

4.0
Compare

Unbrako

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview