Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Pricol Team. If you also belong to the team, you can get access from here

Pricol Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Pricol Production Engineer Interview Questions and Answers

Updated 1 Sep 2023

Pricol Production Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is five...?
  • Ans. 

    Five is a numerical value representing the quantity of five items.

    • Five is the third prime number.

    • There are five fingers on a human hand.

    • A pentagon has five sides.

    • A standard dice has five dots on one side.

  • Answered by AI
  • Q2. Man, machine, method, materials & Measurement
  • Q3. What is five.... S
  • Ans. 

    Five S is a mnemonic used in the oil and gas industry to remember the key steps in drilling a well.

    • Safety - prioritize safety measures to prevent accidents

    • Survey - conduct a survey to determine the best location for drilling

    • Spud - begin drilling the well

    • Set casing - install casing to stabilize the wellbore

    • Squeeze - perform cement squeeze to seal off any leaks

  • Answered by AI
  • Q4. Short, store, shine, standerize & sustain

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

Interview Questionnaire 

1 Question

  • Q1. Production planing

I applied via Recruitment Consultant and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Ash well Ash qualifications according questions asked and experience skill relative questions

Interview Preparation Tips

Interview preparation tips for other job seekers - About your self and discuss your family relative and second round written test and experience skill is available yeh not
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Mathamatics resoning

I applied via Company Website and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. How to manage your man power?
  • Q2. Technical questions about machines.
  • Q3. How to maintain production quantity and quality output?
  • Ans. 

    Maintain production quantity and quality output by optimizing processes, training employees, and monitoring performance.

    • Regularly review and optimize production processes to eliminate inefficiencies and reduce waste.

    • Provide ongoing training and development opportunities for employees to improve their skills and knowledge.

    • Implement quality control measures to ensure that products meet or exceed customer expectations.

    • Mon...

  • Answered by AI
  • Q4. Questions about family backgrounds
  • Q5. Introduce yourself about your own

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir,
I will thankfull for given this opportunity to Express my knowledge..

I applied via Walk-in

Round 1 - HR 

(1 Question)

  • Q1. Tell about your self

Interview Preparation Tips

Interview preparation tips for other job seekers - Normal question asked in Hr interview , Tell about your self
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How we can improve productivity
  • Ans. 

    Productivity can be improved by optimizing processes, utilizing technology, and investing in employee training.

    • Streamline processes to eliminate inefficiencies

    • Implement technology to automate tasks and increase accuracy

    • Provide training and development opportunities to enhance skills and knowledge

    • Set clear goals and expectations for employees

    • Encourage collaboration and communication among team members

  • Answered by AI
  • Q2. What is 6s
  • Ans. 

    6S is a methodology used to organize and improve the workplace by eliminating waste and improving efficiency.

    • 6S stands for Sort, Set in Order, Shine, Standardize, Sustain, and Safety.

    • It is commonly used in manufacturing and production environments.

    • The goal of 6S is to create a clean, organized, and efficient workplace that promotes safety and productivity.

    • Examples of 6S implementation include organizing tools and equip...

  • Answered by AI
Round 3 - Technical 

Pricol Interview FAQs

How many rounds are there in Pricol Production Engineer interview?
Pricol interview process usually has 2 rounds. The most common rounds in the Pricol interview process are Technical and Resume Shortlist.
How to prepare for Pricol Production Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Pricol. The most common topics and skills that interviewers at Pricol expect are Clustering, Electronics, LCD, Manufacturing Process and Microcontroller.
What are the top questions asked in Pricol Production Engineer interview?

Some of the top questions asked at the Pricol Production Engineer interview -

  1. What is five....read more
  2. What is five......read more
  3. Man, machine, method, materials & Measurem...read more

Tell us how to improve this page.

Pricol Production Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Pricol Production Engineer Salary
based on 75 salaries
₹1.3 L/yr - ₹6 L/yr
32% less than the average Production Engineer Salary in India
View more details

Pricol Production Engineer Reviews and Ratings

based on 17 reviews

4.0/5

Rating in categories

3.8

Skill development

3.0

Work-life balance

3.7

Salary

3.4

Job security

4.3

Company culture

2.8

Promotions

4.3

Work satisfaction

Explore 17 Reviews and Ratings
Quality Engineer
182 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
175 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
154 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
151 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
120 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Pricol with

Sundaram Clayton

4.1
Compare

Samvardhana Motherson Group

3.7
Compare

Bharat Forge

3.9
Compare

Bosch

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview