Upload Button Icon Add office photos

Filter interviews by

Clear (1)

CIE Automotive Production Manager Interview Questions and Answers

Updated 18 Jun 2024

CIE Automotive Production Manager Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Assembly BIW production process and their required parameter to meet weld quality
  • Ans. 

    Assembly BIW production process involves various parameters to ensure weld quality.

    • Ensure proper fit-up of components before welding

    • Maintain correct welding parameters such as voltage, current, and travel speed

    • Use appropriate shielding gas and welding consumables

    • Regularly inspect and maintain welding equipment

    • Implement quality control measures such as visual inspection and non-destructive testing

  • Answered by AI
  • Q2. Robotic spot welding knowledge
Round 2 - HR 

(1 Question)

  • Q1. CTC discuss and policy

Interview Preparation Tips

Interview preparation tips for other job seekers - average ok company , not so good
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. What is cc in engine
  • Ans. 

    CC in engine refers to the engine displacement, which is the total volume of all the cylinders in an engine.

    • CC stands for cubic centimeters

    • It is a unit of measurement for engine displacement

    • Higher CC generally means more power and torque

    • For example, a 2.0L engine has a displacement of 2000cc

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. What is cc in engine
  • Ans. 

    CC in engine refers to the engine displacement, which is the total volume of all the cylinders in an engine.

    • CC stands for cubic centimeters

    • It is a unit of measurement used to describe the total volume of all the cylinders in an engine

    • Engine displacement is an important factor in determining the power and performance of a vehicle

  • Answered by AI
Round 4 - One-on-one 

(1 Question)

  • Q1. Vghcjvjjc nchcchvjfvgjg

Interview Preparation Tips

Interview preparation tips for other job seekers - higb

Production Manager Interview Questions Asked at Other Companies

Q1. Production, Maintenance, Quality and Safety. Out of four, tell me ... read more
Q2. What are the major problems in any production plant? and how can ... read more
Q3. 1) what is iso . 2) difference between GMP and CGMP . 3) what is ... read more
Q4. What steps are required before converting an idea into a product?
Q5. What is the major issue with the manufacturing company? Tell me i ... read more

Interview questions from similar companies

I applied via Campus Placement

Interview Preparation Tips

Round: Group Discussion
Experience: Almost the entire group went off topic confusing commercialisation with privatisation. Inspite of HR manager's intervention regarding misinterpretation , group continued with privatisation.
Tips: Technical firms are not expecting high level of GD & communication skills (except when the profile demands so) . You are expected to atleast be able to keep your view point with some logical support.
If you are able to raise 2-3 points in a polite way , you are highly likely to be selected.
If the GD you are appearing is for a profile like marketing , sales or where end to end interaction matters much , u need to be highly skillfull at your communication.

Skill Tips: You must be able to relate your text book knowledge with the practical world. Focus on the applications of whatever you study.
Skills: Design Engineering, Team Leader, Team Player
College Name: NIT Jalandhar

I applied via Referral and was interviewed before Sep 2017. There were 2 interview rounds.

Interview Preparation Tips

Round: Offer letter
Experience: I got confirmation from HR at December, but they gave letter in march month, day by day I have to call them and follow for the offer letter, They gave offer letter after 3 months, but ask me to join within one month.

General Tips: Please dont prefer to work in Mahindra and dont spoil your carrier.
Duration: 1-3 Months

I applied via Campus Placement and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. It was technial and some hr questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to excel in what you know, learning small and perfectly matters rather than knowing many things but not in depth.
So whatever you have done worked get completed hold on it.

I applied via Recruitment Consulltant and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - HR 

(5 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why are you looking for a change?
  • Q5. Tell me about yourself.
Round 2 - One-on-one 

(1 Question)

  • Q1. Tell me about your job profile
Round 3 - One-on-one 

(1 Question)

  • Q1. Just formal discussion with company COO

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest and confident. Company need only hard worker rest they will manage itself

I applied via Campus Placement and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Technical question required, prepare for that

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for technical questions.
More diversified requirements

I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 5 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Are you aware about electronics Architectures of Commercial Vehicles ?
  • Ans. 

    Yes, I am aware of electronics architectures of commercial vehicles.

    • I have experience working with CAN (Controller Area Network) bus systems.

    • I am familiar with the various electronic control units (ECUs) used in commercial vehicles.

    • I understand the importance of proper wiring and grounding in electronic systems.

    • I have knowledge of diagnostic tools and software used for troubleshooting electronic issues.

    • I am aware of th...

  • Answered by AI
  • Q2. Why required brake in Vehicles ?
  • Ans. 

    Brakes are required in vehicles to slow down or stop the vehicle when necessary.

    • Brakes help to prevent accidents by allowing the driver to slow down or stop the vehicle when necessary

    • They also help to maintain control of the vehicle while driving

    • Different types of brakes include disc brakes, drum brakes, and anti-lock brakes

    • Regular maintenance of brakes is important to ensure they are functioning properly

  • Answered by AI
  • Q3. What is Ackerman angle ?
  • Ans. 

    Ackerman angle is the angle formed between the steering axis and a line drawn through the center of the wheel.

    • It is used in the design of steering systems for vehicles.

    • It helps to determine the turning radius of a vehicle.

    • The angle varies depending on the type of vehicle and its intended use.

    • A larger Ackerman angle is used for vehicles that require tighter turning radius, such as go-karts.

    • A smaller Ackerman angle is us...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - As per Ashok Leyland company engineer should be technical sound and expert in Vehicles engineer.

I applied via Naukri.com and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Vehicle chassis system
  • Q2. Details of stress strain curve it's significance in design
  • Ans. 

    Stress-strain curve shows the relationship between stress and strain in a material. It's significant in designing structures.

    • The curve helps in determining the material's strength, stiffness, and ductility.

    • It also helps in selecting the appropriate material for a specific application.

    • The curve can be used to predict the behavior of a material under different loading conditions.

    • The area under the curve represents the en...

  • Answered by AI
  • Q3. Overview of the role and responsibilities in the project executed till date

Interview Preparation Tips

Interview preparation tips for other job seekers - We should stick to the domain knowledge, and confident is conveying. Prepare a complete role execution history from past experience

I applied via Naukri.com and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare more technical details for automobile
Contribute & help others!
anonymous
You can choose to be anonymous

CIE Automotive Interview FAQs

How many rounds are there in CIE Automotive Production Manager interview?
CIE Automotive interview process usually has 3 rounds. The most common rounds in the CIE Automotive interview process are Technical, One-on-one Round and Resume Shortlist.
How to prepare for CIE Automotive Production Manager interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at CIE Automotive. The most common topics and skills that interviewers at CIE Automotive expect are General Management, HRIS, QA Engineering, SAP Quality Management and Salesforce.
What are the top questions asked in CIE Automotive Production Manager interview?

Some of the top questions asked at the CIE Automotive Production Manager interview -

  1. assembly BIW production process and their required parameter to meet weld quali...read more
  2. what is cc in eng...read more
  3. Robotic spot welding knowle...read more

Recently Viewed

INTERVIEWS

Maxfort School

No Interviews

INTERVIEWS

Cognizant

No Interviews

INTERVIEWS

Nutanix

No Interviews

INTERVIEWS

DXC Technology

No Interviews

INTERVIEWS

Shaktiman Tirth Agro Technology

No Interviews

INTERVIEWS

Singtel

No Interviews

INTERVIEWS

Wipro

No Interviews

INTERVIEWS

Cybage

No Interviews

DESIGNATION

INTERVIEWS

Orange Mantra

No Interviews

Tell us how to improve this page.

CIE Automotive Production Manager Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more

Fast track your campus placements

View all
CIE Automotive Production Manager Salary
based on 26 salaries
₹6.8 L/yr - ₹15.1 L/yr
12% less than the average Production Manager Salary in India
View more details

CIE Automotive Production Manager Reviews and Ratings

based on 6 reviews

3.6/5

Rating in categories

3.2

Skill development

3.1

Work-life balance

3.4

Salary

3.4

Job security

2.9

Company culture

3.0

Promotions

3.3

Work satisfaction

Explore 6 Reviews and Ratings
Quality Engineer
156 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
127 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
116 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
115 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
100 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare CIE Automotive with

Bharat Forge

3.9
Compare

Mahindra & Mahindra

4.1
Compare

Tata Motors

4.2
Compare

Ashok Leyland

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent