AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Toyota Industries Engine India Interview Questions and Answers
21 Interview questions
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is typically 0.02 mm or 0.001 inches on a vernier caliper.
It is determined by the number of divisions on the main scale and the vernier scale.
For example, if the main scale has 20 divisions and the vernier scale has 10 divisions, the least count would be 0.02 mm.
Hidden holes are shown using dashed lines in drawings.
Dashed lines are used to represent hidden holes in technical drawings
These lines are typically shorter dashes with larger gaps between them
Examples include dashed lines used to show the location of bolt holes in mechanical drawings
Thread cutting in lathe machine involves selecting the appropriate cutting tool, setting the lathe machine to the correct speed and feed rate, and using the threading dial to ensure accurate thread pitch.
Select the appropriate cutting tool for the thread size and material
Set the lathe machine to the correct speed and feed rate for the material being cut
Engage the half-nuts and use the threading dial to ensure accu...
Bernoulli's law states that an increase in the speed of a fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy.
Describes the relationship between fluid speed, pressure, and potential energy
Used in various fields such as fluid dynamics, aerodynamics, and hydraulics
Can be applied to explain phenomena like lift in airplanes or flow in pipes
The 3 types of balance sheet are classified as assets, liabilities, and equity.
Assets: Resources owned by the company, such as cash, inventory, and property.
Liabilities: Debts and obligations owed by the company, such as loans and accounts payable.
Equity: Represents the owner's stake in the company, calculated as assets minus liabilities.
TDS stands for Tax Deducted at Source, which is a form of tax deducted by the payer before making payment to the recipient.
TDS is deducted by the payer at the time of making certain payments like salary, rent, commission, etc.
The deducted TDS amount is then deposited with the government on behalf of the recipient.
The recipient can claim credit for the TDS amount deducted while filing their income tax return.
TDS ra...
The profit and loss statement shows the financial performance of a company over a specific period of time.
The profit and loss statement summarizes a company's revenues, expenses, and profits or losses.
It helps stakeholders understand how well a company is performing financially.
It is also known as the income statement.
The profit and loss statement is important for decision-making and financial analysis.
There are 1000 microns in 1mm.
1mm is equal to 1000 microns
Micron is a unit of length equal to one millionth of a meter
Used in various fields like engineering, manufacturing, and microscopy
Rear wheel driving is a type of vehicle propulsion where power is sent to the rear wheels.
In rear wheel driving, the engine sends power to the rear wheels of the vehicle for propulsion.
This setup is commonly found in sports cars and some trucks.
Rear wheel driving provides better weight distribution and handling compared to front wheel drive.
Examples of rear wheel drive vehicles include BMW 3 Series, Ford Mustang, ...
The 4 strokes of an engine are intake, compression, power, and exhaust.
Intake stroke: Fuel and air are drawn into the combustion chamber.
Compression stroke: The fuel-air mixture is compressed by the piston.
Power stroke: The spark plug ignites the compressed mixture, causing an explosion that drives the piston down.
Exhaust stroke: The piston pushes the exhaust gases out of the combustion chamber.
Toyota Industries Engine India Interview Experiences
27 interviews found
Anonymous
I applied via Campus Placement and was interviewed in Mar 2023. There were 4 interview rounds.
(1 Question)
- Q1. Basics of mechanical engineering.. Concepts of testing, material science, laboratory knowledge etc.
(2 Questions)
- Q1. Technical round was quiet good.. Make sure u have good knowledge about everything that u have added in you resume and decide about the favorite subject that u will have to answer about. The interviewer wa...
- Q2. After u clear the technical round this was a round with the Hod (head of the department) one more technical round same as the round before but a senior will interview you. Make sure u are core is strong an...
(1 Question)
- Q1. After getting through the major rounds u may think this round is a cakewalk.. But the Hr round is the worst and the toughest round. This guy is never satisfied with your answers and never see u in humanita...
Interview Preparation Tips
Selected
(3 Questions)
- Q1. Tools management system
- Q2. Technician jobs
- Q3. EmployGuess the talent
(2 Questions)
- Q1. Self introduction
- Q2. Next work experience
- Ans.
I recently completed an internship at a manufacturing company where I gained hands-on experience with various instrumentation systems.
Completed internship at manufacturing company
Gained hands-on experience with instrumentation systems
Worked on troubleshooting and maintenance of control systems
Assisted in calibration of sensors and transmitters
Interview Preparation Tips
Sarang Sethi
Selected
I applied via Walk-in and was interviewed in Jul 2024. There were 3 interview rounds.
(2 Questions)
- Q1. Self introduction
- Q2. System of process discussion
Salary and job location find out
(2 Questions)
- Q1. Joining process
- Q2. Joining date and policy discussion
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
(1 Question)
- Q1. Why are you doing something different from what you have learned
- Ans.
To improve efficiency and productivity by implementing new techniques or technologies learned.
Continuous improvement is essential in any field to stay competitive
New techniques or technologies may lead to better results or cost savings
Adapting to changes in the industry is necessary for growth and success
Interview Preparation Tips
Selected
I applied via Campus Placement and was interviewed in Aug 2023. There were 5 interview rounds.
(1 Question)
- Q1. Basics of Mechanical Engineering especially Material science and Production related questions
(1 Question)
- Q1. Questions will asked based upon the skills which you have mentioned in your resume
(1 Question)
- Q1. Questions will be asked based on your favourite subject
(2 Questions)
- Q1. How do you make thread cutting in lathe machine
- Ans.
Thread cutting in lathe machine involves selecting the appropriate cutting tool, setting the lathe machine to the correct speed and feed rate, and using the threading dial to ensure accurate thread pitch.
Select the appropriate cutting tool for the thread size and material
Set the lathe machine to the correct speed and feed rate for the material being cut
Engage the half-nuts and use the threading dial to ensure accurate ...
- Q2. What is Bernoullis law
- Ans.
Bernoulli's law states that an increase in the speed of a fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy.
Describes the relationship between fluid speed, pressure, and potential energy
Used in various fields such as fluid dynamics, aerodynamics, and hydraulics
Can be applied to explain phenomena like lift in airplanes or flow in pipes
Selected
I applied via Campus Placement and was interviewed before Oct 2023. There were 3 interview rounds.
It is simple test that bto check the person eduction
(2 Questions)
- Q1. What is the least count of vernier caliper?
- Ans.
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is typically 0.02 mm or 0.001 inches on a vernier caliper.
It is determined by the number of divisions on the main scale and the vernier scale.
For example, if the main scale has 20 divisions and the vernier scale has 10 divisions, the least count would be 0.02 mm.
- Q2. In drawing which line is used to show the hidden holes
- Ans.
Hidden holes are shown using dashed lines in drawings.
Dashed lines are used to represent hidden holes in technical drawings
These lines are typically shorter dashes with larger gaps between them
Examples include dashed lines used to show the location of bolt holes in mechanical drawings
(2 Questions)
- Q1. Tell about yourself
- Ans.
I am a dedicated and hardworking individual with a passion for learning and growing in my career.
Graduated with a degree in [Your Field of Study]
Currently undergoing training at [Company Name]
Have experience in [relevant experience or skills]
Passionate about [specific interest or hobby related to your field]
- Q2. Do work in shifts or in general. Shift
Interview Preparation Tips
Selected
I appeared for an interview in Jun 2023.
(5 Questions)
- Q1. What's are the 3 types os balance sheet
- Ans.
The 3 types of balance sheet are classified as assets, liabilities, and equity.
Assets: Resources owned by the company, such as cash, inventory, and property.
Liabilities: Debts and obligations owed by the company, such as loans and accounts payable.
Equity: Represents the owner's stake in the company, calculated as assets minus liabilities.
- Q2. Why the profit and loss
- Ans.
The profit and loss statement shows the financial performance of a company over a specific period of time.
The profit and loss statement summarizes a company's revenues, expenses, and profits or losses.
It helps stakeholders understand how well a company is performing financially.
It is also known as the income statement.
The profit and loss statement is important for decision-making and financial analysis.
- Q3. Accounting golden roll
- Q4. Please tell me tds full from Tex deducted source
- Ans.
TDS stands for Tax Deducted at Source, which is a form of tax deducted by the payer before making payment to the recipient.
TDS is deducted by the payer at the time of making certain payments like salary, rent, commission, etc.
The deducted TDS amount is then deposited with the government on behalf of the recipient.
The recipient can claim credit for the TDS amount deducted while filing their income tax return.
TDS rates v...
- Q5. What is the esic Employee insurance
Interview Preparation Tips
Selected
I applied via Campus Placement and was interviewed in Apr 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Technical questions asked based on their branch Ex: Electrical engineering * Opposition should know all basic regarding their branch subjects.
- Q2. Written exam was average level #50/50 based on basic of electrical and electronics engineering.
- Q3. Basic of Electrical ex: Single phase voltage? 3-phase voltages?
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jan 2023. There was 1 interview round.
(2 Questions)
- Q1. Engineering machine, autodask,
- Q2. Excel , word , mathematica,
Interview Preparation Tips
- Supervision
- Maintenance
- Pipeline
- Boiler
I applied via Company Website and was interviewed in Jan 2023. There were 3 interview rounds.
What is the capacity of human brain by Tera byte?
One decimeter equal to ______________ cm.
(7 Questions)
- Q1. What is you father's brothers to you?
- Ans. Uncle
- Q2. In which planet human being is lived ______________?
- Ans.
Earth is the planet where human beings live.
Human beings live on planet Earth.
Earth is the third planet from the Sun in our solar system.
It is the only known planet to support life.
Earth has a diverse range of ecosystems and environments that sustain human life.
Examples of Earth's features include oceans, mountains, forests, and deserts.
- Q3. The capital city of Afghanistan is _____________?
- Q4. 200x + 30 = 430
- Q5. What is you father brothers son for you?
- Q6. Which one is the biggest ocean in the world?
- Ans.
The Pacific Ocean is the largest ocean in the world.
The Pacific Ocean covers an area of about 63 million square miles.
It is larger than all the other oceans combined.
It stretches from the Arctic Ocean in the north to the Southern Ocean in the south.
The Pacific Ocean is home to numerous islands, including Hawaii and Easter Island.
- Q7. The density of water is how much
- Ans.
The density of water is approximately 1 gram per cubic centimeter.
The density of water is a fundamental property of the substance.
It is commonly used as a reference point for comparing the densities of other substances.
The density of water varies slightly with temperature and pressure.
At 4 degrees Celsius, the density of water is exactly 1 gram per cubic centimeter.
Water is less dense in its solid form (ice) than in it...
Interview Preparation Tips
- Mathematics
- Physics
- Chemistry
- English
- Thermodynamics
- Automechanic
Selected
I appeared for an interview before Apr 2024, where I was asked the following questions.
- Q1. Ask About your self
- Q2. Ask about family,and skill, strength and weakness
- Q3. Name (basavaraj n shivapuji ),from (belgam district Kittur. > "My name is Basavaraj, and I have a ITI qualification [ITI] from [ Government College ITI ]." 2. Work Experience in bengaloor 1y 3m company Toy...
Interview Preparation Tips
Top trending discussions
Toyota Industries Engine India Interview FAQs
The duration of Toyota Industries Engine India interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Toyota Industries Engine India Interviews By Designations
- Toyota Industries Engine India Trainee Interview Questions
- Toyota Industries Engine India Graduate Trainee Interview Questions
- Toyota Industries Engine India Accountant Interview Questions
- Toyota Industries Engine India Engineering Analyst Interview Questions
- Toyota Industries Engine India Graduate Apprentice Trainee Interview Questions
- Toyota Industries Engine India Production Engineer Interview Questions
- Toyota Industries Engine India Diploma Trainee Interview Questions
- Toyota Industries Engine India Mechanical Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 22 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Toyota Industries Engine India Reviews and Ratings
based on 489 reviews
Rating in categories
|
Trainee
123
salaries
|  ₹1.4 L/yr - ₹3.5 L/yr |
|
Assistant Engineer
80
salaries
| ₹2 L/yr - ₹9 L/yr |
|
Production Engineer
58
salaries
| ₹1.8 L/yr - ₹10.5 L/yr |
|
Senior Engineer
51
salaries
| ₹7.7 L/yr - ₹18 L/yr |
|
Diploma Trainee Engineer
43
salaries
| ₹1.9 L/yr - ₹4 L/yr |
Amazon Transportation Services
Landmark Group
McDonald's
JCB
- Home >
- Interviews >
- Toyota Industries Engine India Interview Questions
