Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Toyota Industries Engine India Instrumentation Technician Interview Questions and Answers

Updated 5 Feb 2025

Toyota Industries Engine India Instrumentation Technician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
-
Result
Selected Selected
Round 1 - Technical 

(3 Questions)

  • Q1. Tools management system
  • Q2. Technician jobs
  • Q3. EmployGuess the talent
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. Next work experience
  • Ans. 

    I recently completed an internship at a manufacturing company where I gained hands-on experience with various instrumentation systems.

    • Completed internship at manufacturing company

    • Gained hands-on experience with instrumentation systems

    • Worked on troubleshooting and maintenance of control systems

    • Assisted in calibration of sensors and transmitters

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Tools management system good Work

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

Interview Questionnaire 

8 Questions

  • Q1. Run us through your life till this point. [What?!?]
  • Ans. 

    I grew up in a small town, went to college, and pursued a career in tech.

    • Born and raised in a small town

    • Attended college and earned a degree in Computer Science

    • Started working in tech as a software engineer

    • Moved to a big city for better job opportunities

    • Continued to advance my career and gain new skills

  • Answered by AI
  • Q2. What are the various differences between the different modes of heat transfer? [A pure core question that tests you to the core]
  • Ans. 

    Heat transfer occurs through conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through the movement of fluids or gases.

    • Radiation is the transfer of heat through electromagnetic waves.

    • Examples include touching a hot stove (conduction), boiling water (convection), and feeling the warmth of the sun (rad

  • Answered by AI
  • Q3. I want to design an air-cooled radiator for an engine. How would you decide the number of fins? [Considerable time was spent on this]
  • Q4. What would you do to reduce the risk of Global Warming posed by using R12 in air-conditioners? [I said use R134a. Apparently, this is not completely environment-friendly. The Americans are trying to fool u...
  • Ans. 

    Reduce risk of global warming from R12 in air-conditioners

    • Use alternative refrigerants like R134a or R290

    • Ensure proper disposal of old refrigerants

    • Regular maintenance and leak detection to prevent emissions

    • Encourage energy-efficient ACs to reduce overall emissions

    • Promote use of natural refrigerants like CO2 or ammonia

    • Implement regulations and policies to phase out harmful refrigerants

    • Invest in research and development

  • Answered by AI
  • Q5. What is the difference between a summation and an integral? [This was asked because I mentioned Math as my strongest point]
  • Q6. In what cases is the Simplex method of solving simultaneous equations used?
  • Ans. 

    The Simplex method is used to solve linear programming problems with multiple variables and constraints.

    • Used in optimization problems

    • Used to find the optimal solution

    • Used when there are multiple variables and constraints

    • Examples include production planning and resource allocation

  • Answered by AI
  • Q7. Which sector of the industry do you think will boom in the next five years? [My answer: Statistics]
  • Ans. 

    Artificial Intelligence (AI) sector is expected to boom in the next five years.

    • AI is being integrated into various industries such as healthcare, finance, and transportation.

    • The global AI market is expected to reach $267 billion by 2027.

    • AI is being used for predictive analytics, natural language processing, and image recognition.

    • Companies such as Google, Amazon, and Microsoft are investing heavily in AI research and de

  • Answered by AI
  • Q8. Do you have any questions for us?

Interview Preparation Tips

General Tips: "1. I felt the Apti was the toughest part in the whole process. 45 seconds is just not sufficient to answer the questions esp. the ones on Probability; so brush up on the math! If you've learnt your concepts well, the technical questions ought to be a breeze.
2. Make sure you speak some sense at least thrice in the GD, and you're through.
3. They never once interrupted me in the PI. They waited for me to complete what I was saying, and then the next question was based on my last two sentences! So be very careful of what you're saying esp. while answering the technical questions. Most importantly, be very genuine throughout the interview- speak your heart out- and don't worry about how it's going, in the middle of it!

Good luck."
Skill Tips: [It's generally good to ask them a question or two here. I asked them if I could choose my preferred work location, and how the work-culture was at Tata Motors]"
Skills:
College Name: Veermata Jijabai Technological Institute, Mumbai [ VJTI ]

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Referral and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Branch related questions asked
  • Q2. Part name in any vehicle
  • Ans. 

    A part name in a vehicle is the alternator.

    • The alternator is responsible for charging the battery and powering the electrical system.

    • It is typically located near the front of the engine and is driven by a belt.

    • Examples of vehicles that have alternators include cars, trucks, and motorcycles.

  • Answered by AI
  • Q3. Wheel, door, headlamp,tail lamp,gearbox , engine, axle, bumper,etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - As many branch related question as possible should be asked

I applied via Campus Placement and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Aptitude Test 

Normal as u can solve your aptitude test

Round 3 - HR 

(2 Questions)

  • Q1. Why you are want to join Tata motors.
  • Q2. What is the primary tools for an electrician.
  • Ans. 

    The primary tools for an electrician include pliers, wire strippers, screwdrivers, voltage testers, and power drills.

    • Pliers are used to grip and twist wires and other components.

    • Wire strippers are used to remove insulation from wires.

    • Screwdrivers are used to tighten or loosen screws.

    • Voltage testers are used to check if a circuit is live or not.

    • Power drills are used to drill holes and drive screws.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive for any preferred job .
Be sincere for any discussion.

Interview Preparation Tips

Round: Technical Interview
Experience: "I was only questioned on my resume,
-internship
-contribution to college through extra curriculars
-personal opinion based questions based on information I provided

ps: they laid stress on a good pointer for shortlisting for interview then on extra curricular activities for selection."

General Tips: "prepartion for campus begins as early as the begining of 2nd year.

please feel free to mail / call for any help.

All the Best.
"
College Name: Veermata Jijabai Technological Institute, Mumbai [ VJTI ]
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2020. There were 2 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. What is the Hydraulic system
  • Ans. 

    The hydraulic system is a technology that uses liquid to transmit power.

    • Uses incompressible fluid to generate force

    • Consists of a pump, fluid reservoir, valves, cylinders, and motors

    • Commonly used in heavy machinery like excavators and hydraulic presses

  • Answered by AI
  • Q2. What is the blacklash
  • Ans. 

    Backlash is the clearance or lost motion between mechanical components, typically in gears or threads.

    • Backlash is the amount of free movement or play between components in a mechanical system.

    • It can be found in gears, threads, or any other mechanical connection where there is a gap between mating parts.

    • Backlash can affect the accuracy and precision of a mechanical system.

    • It is important to minimize backlash in precisio...

  • Answered by AI
  • Q3. What is Why-why Analysis
  • Ans. 

    Why-why Analysis is a problem-solving technique that involves asking 'why' multiple times to get to the root cause of an issue.

    • Involves asking 'why' repeatedly to uncover the underlying causes of a problem

    • Helps in identifying the root cause of an issue rather than just addressing symptoms

    • Commonly used in quality management and process improvement

    • Example: If a machine breaks down - Why? Because a part failed - Why? Beca...

  • Answered by AI
  • Q4. What is the Backlesh in axis
  • Ans. 

    Backlash in axis refers to the clearance or play between mating components in a mechanical system.

    • Backlash is the amount of movement or play between components in a mechanical system.

    • It can affect the accuracy and precision of the system.

    • Backlash can be minimized by using precision components or adjusting the system properly.

    • For example, in a gear system, backlash can cause inaccuracies in positioning if not properly a

  • Answered by AI
  • Q5. How many type of bearing
  • Ans. 

    There are several types of bearings used in mechanical applications.

    • Plain bearings

    • Rolling element bearings (ball bearings, roller bearings)

    • Thrust bearings

    • Sleeve bearings

    • Needle bearings

    • Tapered roller bearings

    • Spherical roller bearings

  • Answered by AI
  • Q6. How many type of Hydraulic pump
  • Ans. 

    There are several types of hydraulic pumps, including gear pumps, vane pumps, piston pumps, and screw pumps.

    • Gear pumps are simple and economical, but not very efficient.

    • Vane pumps are more efficient and quieter than gear pumps.

    • Piston pumps are highly efficient and can handle high pressures.

    • Screw pumps are used for high viscosity fluids and can handle high pressures as well.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Bharat Forge Mechanical Technician interview:
  • CNC Machines
  • VMC Machine
  • Hydraulics
  • Pneumatics
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Mathamatics resoning

Contribute & help others!
anonymous
You can choose to be anonymous

Toyota Industries Engine India Interview FAQs

How many rounds are there in Toyota Industries Engine India Instrumentation Technician interview?
Toyota Industries Engine India interview process usually has 2 rounds. The most common rounds in the Toyota Industries Engine India interview process are HR and Technical.
What are the top questions asked in Toyota Industries Engine India Instrumentation Technician interview?

Some of the top questions asked at the Toyota Industries Engine India Instrumentation Technician interview -

  1. Tools management sys...read more
  2. EmployGuess the tal...read more
  3. Technician j...read more

Recently Viewed

INTERVIEWS

Avalara Technologies

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Toyota Industries Engine India

No Interviews

INTERVIEWS

Toyota Industries Engine India

No Interviews

INTERVIEWS

Avalara Technologies

No Interviews

INTERVIEWS

London Stock Exchange Group

No Interviews

INTERVIEWS

Toyota Industries Engine India

No Interviews

INTERVIEWS

Avalara Technologies

No Interviews

INTERVIEWS

Hexaware Technologies

5.6k top interview questions

CAMPUS PLACEMENT

Bantala College of Higher Education, Bantala

Tell us how to improve this page.

Toyota Industries Engine India Instrumentation Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 995 Interviews
Maruti Suzuki Interview Questions
4.2
 • 585 Interviews
Hero MotoCorp Interview Questions
4.1
 • 333 Interviews
TVS Motor Interview Questions
4.0
 • 312 Interviews
CitiusTech Interview Questions
3.4
 • 269 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Morningstar Interview Questions
3.9
 • 241 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
IKS Health Interview Questions
3.6
 • 232 Interviews
View all
Trainee
107 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
83 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
55 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Lead
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Toyota Industries Engine India with

Mahindra & Mahindra

4.1
Compare

Tata Motors

4.2
Compare

Ashok Leyland

4.1
Compare

Bharat Forge

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent