i
Thermax Limited
Filter interviews by
Low gas pressure can lead to various issues like inefficient operation or equipment failure. Corrective actions include checking for leaks, adjusting regulators, and ensuring proper ventilation.
Check for leaks in the gas system
Adjust regulators to increase gas pressure
Ensure proper ventilation for gas combustion
Inspect gas supply lines for blockages or restrictions
Verify that gas appliances are functioning properly
I have 5 years of experience in the field and my current total CTC is $60,000.
5 years of experience in service engineering
Current total CTC is $60,000
Experience includes troubleshooting, maintenance, and repair of equipment
I applied via Job Fair and was interviewed in Dec 2023. There were 3 interview rounds.
Thermax Limited interview questions for designations
Top trending discussions
posted on 30 Jan 2025
I was interviewed in Dec 2024.
The duration was 50 minutes and included 55 questions focused on technical areas related to mechanical, electrical, and hydraulic systems, as well as some questions on safety and reasoning.
I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.
All Cummins engine questions
Cummins engines are available in various types including diesel, natural gas, and hybrid options.
Cummins diesel engines are commonly used in heavy-duty trucks and construction equipment
Cummins natural gas engines are popular for use in buses and other transportation vehicles
Cummins offers hybrid engines that combine diesel and electric power for increased efficiency
Other types of Cummins engines include marine engines
There are two main types of stock: common stock and preferred stock.
Common stock represents ownership in a company and typically comes with voting rights.
Preferred stock usually does not have voting rights but has a higher claim on assets and earnings.
Stock can also be classified based on market capitalization (small-cap, mid-cap, large-cap) or sector (technology, healthcare, finance).
Thermostats can be categorized into mechanical, electronic, programmable, and smart thermostats.
Mechanical thermostats use a bimetallic strip to control temperature.
Electronic thermostats use electronic sensors to detect temperature changes.
Programmable thermostats allow users to set schedules for heating and cooling.
Smart thermostats can be controlled remotely via smartphone apps and may have features like learning al...
The question is asking about the engine specifications of a specific model.
Identify the specific model being referred to
Provide details about the engine specifications of that model
Include any unique features or upgrades of the engine
Cooling system is a mechanism used to remove heat from a space or substance to maintain a lower temperature.
Cooling systems can be found in various applications such as air conditioning units, refrigerators, and computer systems.
They typically involve the circulation of a coolant or refrigerant to absorb and transfer heat away from the desired area.
Cooling systems can be either air-cooled or liquid-cooled, depending on
I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.
The diesel engine combustion process involves the ignition of fuel injected into the combustion chamber by compressed air.
Diesel fuel is injected into the combustion chamber at high pressure
The air in the combustion chamber is compressed by the piston, leading to high temperatures
The high temperature air ignites the fuel, leading to combustion and the generation of power
The combustion process in diesel engines is more
A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.
Two-stroke engines have a simpler design with fewer moving parts compared to four-stroke engines.
Two-stroke engines typically produce more power for their size but are less fuel-efficient and emit more pollution.
Four-stroke engines are more common in cars, motorcycles, and larger machinery d...
A hydraulic component is a device that utilizes fluid power to perform mechanical tasks.
Hydraulic components use liquid to transmit power.
Common examples include hydraulic cylinders, pumps, motors, valves, and hoses.
They are often used in heavy machinery, construction equipment, and industrial applications.
Realy is a type of relay used in electrical systems to control high power devices with low power signals.
Relays are switches that open and close circuits electromechanically
Realy is a type of relay specifically designed for high power applications
Working principle involves an electromagnet that moves an armature to open or close the circuit
Commonly used in industrial automation, automotive, and HVAC systems
Least count is the smallest change in the measured quantity that can be detected by the measuring instrument.
Least count is determined by the smallest division on the scale of the measuring instrument.
It is important for accurate measurements and precision in engineering.
For example, a ruler with millimeter divisions has a least count of 1 mm.
A vernier caliper with 0.1 mm divisions has a least count of 0.1 mm.
The direction a motor runs depends on the type of motor and the wiring configuration.
The direction of rotation can be determined by the motor's design and the direction of the current flow.
Some motors can run in both clockwise and counterclockwise directions depending on the wiring.
Reversing the polarity of the power supply can change the direction of rotation in some motors.
Delta connection in motor terminal box is made by connecting the three motor terminals in a triangular configuration.
Connect the three motor terminals labeled U, V, and W in a triangular configuration.
Ensure proper insulation and secure connections to prevent short circuits.
Use appropriate tools and follow manufacturer's guidelines for wiring.
Double check the connections before powering up the motor to avoid damage.
Con...
posted on 16 Apr 2024
I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.
Pumps, fans, gearboxes, compressors, motors, and generators are essential components in various mechanical systems.
Pumps are used to move fluids, such as water or oil, through a system.
Fans are used to create airflow for cooling or ventilation purposes.
Gearboxes are used to transmit power from one component to another at different speeds or torques.
Compressors are used to increase the pressure of a gas, such as in air ...
Data collection process involves gathering, recording, and storing information for analysis and decision-making.
Identify the data needed for analysis
Determine the method of data collection (surveys, interviews, observations, etc.)
Collect data using appropriate tools and techniques
Ensure data accuracy and reliability
Store data securely for future reference
Analyze collected data to draw conclusions and make decisions
Condition monitoring of tools involves regularly checking and analyzing the performance and health of tools to prevent breakdowns.
Regularly inspect tools for signs of wear and tear
Use sensors to monitor tool performance in real-time
Analyze data collected to predict potential failures
Implement preventive maintenance based on monitoring results
I applied via Walk-in and was interviewed in Sep 2023. There were 4 interview rounds.
Technical skills test
based on 5 interviews
1 Interview rounds
based on 23 reviews
Rating in categories
Shift Incharge
298
salaries
| ₹2.9 L/yr - ₹8.9 L/yr |
Assistant Manager
281
salaries
| ₹5.8 L/yr - ₹16 L/yr |
Electrical Engineer
246
salaries
| ₹2.4 L/yr - ₹7.2 L/yr |
Senior Executive
214
salaries
| ₹4 L/yr - ₹11 L/yr |
Control Room Engineer
182
salaries
| ₹2.5 L/yr - ₹7 L/yr |
Kirloskar Brothers
BHEL
Siemens
Larsen & Toubro Limited