5 Tega Industries Design GET Interview Questions & Answers | Complete Prep Guide 2025

Tega Industries Design GET Interview Experiences

1 interview found

Design GET Interview Questions & Answers

Anonymous

posted on 3 Jun 2024

Interview experience

Good

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

Selected

I applied via Campus Placement and was interviewed in Dec 2023. There were 3 interview rounds.

Round 1 - One-on-one

(2 Questions)

Q1. Difference between AC and refrigerator

Ans.

AC is a device that cools and dehumidifies air in a room, while a refrigerator is a device that cools and preserves food.

AC is used to cool and dehumidify air in a room, while a refrigerator is used to cool and preserve food.
AC typically has a larger cooling capacity compared to a refrigerator.
AC uses a refrigeration cycle to cool the air, while a refrigerator uses the same cycle to cool its interior.
AC units are usual...

Answered by AI

Add your answer

Q2. Carnot cycle details and description

Ans.

The Carnot cycle is a theoretical thermodynamic cycle that operates between two heat reservoirs.

Consists of four reversible processes: isothermal expansion, adiabatic expansion, isothermal compression, adiabatic compression
Efficiency of Carnot cycle is determined by the temperatures of the two reservoirs
It is the most efficient heat engine cycle possible

Answered by AI

Add your answer

Round 2 - HR

(1 Question)

Q1. Quick overview about the final year project

Add your answer

Round 3 - One-on-one

(2 Questions)

Q1. General question about SOM and design were asked

Add your answer

Q2. How does a cricket ball swing. Explain using fluid mechanics.

Ans.

A cricket ball swings due to the asymmetrical airflow around it caused by the seam position and surface roughness.

Swing is caused by the ball creating turbulent airflow around it due to its seam position and surface roughness.
The rough side of the ball creates more drag, causing it to swing towards that side.
The Magnus effect also plays a role in swing, where the ball's spin creates a pressure difference leading to mov...

Answered by AI

Add your answer

Top trending discussions

View All

Interview Tips & Stories

5d (edited)

timepasstiwari

A Digital Markter

Got Rejected In an Interview, Just Because I Didn’t Answer a Personal Question

So, I got invited for this interview, and they told me to be there at 9 AM. Of course, I get there early, like 8:30, because I don't want to be late. But then I end up waiting for 1.5 hours... read more

Got a question about Tega Industries?

Ask anonymously on communities.

Interview questions from similar companies

Graduate Engineer Trainee (Get) Interview Questions & Answers

Kirloskar Brothers

AKANSHA MEHROTRA

posted on 11 Feb 2015

Interview Preparation Tips

Round: Group Discussion
Experience: HR'S MAINLY FOCUSES ON YOUR SPEAKING SKILLS AND YOUR ABILITY TO KEEP THE GROUP GOING IN RIGHT DIRECTION.ITS IMPORTANT TO KEEP YOUR POINTS CLEAR AND PRECISE.THERE IS NO NEED TO GET HYPER IF NO ONE IS AGREEING WITH YOU .STAY CALM !! TRY TO ASK THE PASSIVE MEMBERS OF THE GROUP TO SPEAK IN BETWEEN THIS WILL REFLECT THAT YOU HAVE LEADER LIKE QUALITIES .I WAS IN SUPPORT OF THE TOPIC AND I STARTED MY DISCUSSION FROM THE INDIGENOUS PRACTICES LIKE AYURVEDA,YOGA ,ZERO .THEN I FOCUSED ON THE NEWER INVENTIONS LIKE NANO, MARS ORBITER MISSION ETC
Tips: USE VERY SIMPLE LANGUAGE TO EXPRESS YOUR VIEWS

TRY TO START THE DISCUSSION

TRY TO ASK THE PASSIVE MEMBERS TO SPEAK DURING THE MIDDLE OF THE DISCUSSION

BE YOURSELF

DON'T EXAGGERATE YOUR VIEWS

NEVER LET THE GROUP DEVIATE FROM THE TOPIC

College Name: NIT AGARTALA

Graduate Engineer Trainee (Get) Interview Questions & Answers

Kirloskar Brothers

Nipun Kansal

posted on 7 Aug 2015

Interview Preparation Tips

Round: Resume Shortlist
Experience: It took me a lot of time for me to make my first resume. Although i have made a lot of changes in it and it is totally different from my first one. I keep on updating my resume and still i think its not what i want.
Tips: Make your first resume by yourself without taking any help from others, review it and look for adds or subtracts.
Then look for some professional resume online and take help from your elders who are already having a job.

Round: Test
Experience: It's always mine bitter one, as i am not so good in technical, only i used to deal with is quantitative portion.
Tips: You should be well prepared. [not like me :)]

Round: Group Discussion
Experience: I really don't care about the topic, as i always don't know any shit about the topic, but don't know how i have always cleared GD round.
Tips: One thing if don't know anything about the topic so don't start, give chance to someone else and after having some idea about the topic be speaker. Always look into the eyes of the other candidates while addressing your points. Just be calm n cool.

College Name: NIT Agartala

Graduate Engineer Trainee (Get) Interview Questions & Answers

Siemens

akshay dixit

posted on 20 May 2017

I was interviewed in Aug 2016.

Interview Questionnaire

3 Questions

Q1. Mention the difference between microcontroller and microprocessor?

Ans.

Microcontroller is a compact computer on a single chip with built-in memory and peripherals, while microprocessor is just a CPU.

Microcontroller has on-chip memory and peripherals, while microprocessor requires external memory and peripherals.
Microcontroller is used in embedded systems, while microprocessor is used in personal computers.
Examples of microcontrollers include Arduino, PIC, and AVR, while examples of microp...

Answered by AI

View 2 more answers

Q2. Mention various diodes used in electronic circuits.

Ans.

Diodes are electronic components that allow current to flow in one direction. Various types of diodes are used in electronic circuits.

Rectifier diodes
Zener diodes
Schottky diodes
LEDs
Varactor diodes
Tunnel diodes
Photodiodes
PIN diodes

Answered by AI

Add your answer

Q3. Mention the role of SCR

Ans.

SCR stands for Silicon Controlled Rectifier. It is a semiconductor device used for power control and switching applications.

SCR is used in various applications such as motor control, lighting control, and heating control.
It is used in AC power control circuits to regulate the amount of power delivered to a load.
SCR is also used in voltage regulators, inverters, and battery chargers.
It is a three-terminal device consist...

Answered by AI

Add your answer

Interview Preparation Tips

Round: Test
Experience: This test had 3 sections- Quant,DI and verbal. It was a CAT-type exam but difference was there was time limit of 60-90 seconds for each question.

Tips: Speed and accuracy are important for clearing this test
Duration: 1 hour 30 minutes
Total Questions: 60

Round: Test
Experience: This test contained basic electronics questions.Most of the questions were from 2 nd year sylabbus.
Tips: Be thorough with the basics to ace this test.
Duration: 30 minutes
Total Questions: 30

Round: Technical + HR Interview
Experience: Only 6-7 questions were asked during the interview.All of them were rather simple which involved basic questions.
Tips: Maintain composure during the interview.Dont press the panic button.

Skills: Technical Analysis
College Name: Visvesvaraya National Institute Of Technology

Skills evaluated in this interview

Graduate Engineer Trainee (Get) Interview Questions & Answers

Siemens

Anonymous

posted on 4 Apr 2021

Interview Questionnaire

1 Question

Q1. Basic technical questions regarding my b.tech specialization I .e, electrical engineering and basci plc programming

Add your answer

Graduate Engineer Trainee (Get) Interview Questions & Answers

Thermax Limited

Anonymous

posted on 13 Aug 2021

I applied via Campus Placement and was interviewed before Aug 2020. There were 4 interview rounds.

Interview Questionnaire

1 Question

Q1. Technical round

Ans. Be honest and try to answer as you can if not knowing then just tell the truth.

Answered by umesh karpae

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - It’s good company focus on your basic skills and your previous work experience

Graduate Engineer Trainee (Get) Interview Questions & Answers

Cummins

Anonymous

posted on 16 Nov 2020

Interview Questionnaire

1 Question

Q1. If we make you a quality inspector, and one day you find out that certain products have been made below standard quality norms what would you do?

Ans.

As a quality inspector, if I find out that certain products have been made below standard quality norms, I would take immediate action to address the issue.

I would document the findings and gather evidence of the substandard products.
I would notify the relevant stakeholders, such as the production team and management, about the issue.
I would work with the production team to identify the root cause of the problem and im...

Answered by AI

View 1 more answer

Graduate Engineer Trainee (Get) Interview Questions & Answers

Tube Investments of India

Anonymous

posted on 22 Jul 2022

I applied via Campus Placement and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Aptitude Test

Basic to medium level aptitude, reasoning, english were asked a duration of 120 minutes were given also approximately 40 questions were asked from your core subjects. for me it was mechanical engineering

Round 2 - Technical

(3 Questions)

Q1. Questions on Total quality management, SPC, X and R CHART, problem solving methods, tools of TQM etc were asked.

Add your answer

Q2. Questions on SOM, MD, difference between different types of drive mechanism like gears, belts, chains, pulleys etc

Add your answer

Q3. Extra circular activities, hobbies, future goal etc

Add your answer

Interview Preparation Tips

Topics to prepare for Tube Investments of India Graduate Engineer Trainee (Get) interview:

TQM
Thermodynamics
strength of materials
IC Engines
Machine Design

Interview preparation tips for other job seekers - Concepts on core subjects should be in command, also be positive and must have a good communication skills, extra activities especially technical ones will add a plus point.

Graduate Engineer Trainee (Get) Interview Questions & Answers

BHEL

Anonymous

posted on 22 Jun 2022

I was interviewed in Dec 2021.

Round 1 - Aptitude Test

Aptitude test was good , one should be very good in studies

Round 2 - Technical

(1 Question)

Q1. About the electrical machines and overall experience in college with marks

Add your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - go study well one should be good and regular in studies

Graduate Engineer Trainee (Get) Interview Questions & Answers

Siemens

Anonymous

posted on 26 Feb 2025

Interview experience

Excellent

Difficulty level

Process Duration

Result

Selected

I was interviewed in Jan 2025.

Round 1 - Coding Test

2 to 3 dsa questions

Round 2 - HR

(1 Question)

Q1. Why u want to join

Ans.

I am passionate about the mission of the organization and believe my skills align well with the role.

Passionate about the organization's mission
Skills align well with the role
Excited about the opportunity to contribute

Answered by AI

Add your answer

Tega Industries Interview FAQs

How many rounds are there in Tega Industries Design GET interview?

Tega Industries interview process usually has 3 rounds. The most common rounds in the Tega Industries interview process are One-on-one Round and HR.

What are the top questions asked in Tega Industries Design GET interview?

Some of the top questions asked at the Tega Industries Design GET interview -

How does a cricket ball swing. Explain using fluid mechani...read more
Difference between AC and refrigera...read more
Carnot cycle details and descript...read more

Assistant Manager 73 salaries	₹0 L/yr - ₹0 L/yr
Senior Engineer 44 salaries	₹0 L/yr - ₹0 L/yr
Junior Engineer 37 salaries	₹0 L/yr - ₹0 L/yr
Associate Engineer 22 salaries	₹0 L/yr - ₹0 L/yr
Graduate Engineer Trainee (Get) 22 salaries	₹0 L/yr - ₹0 L/yr

Tega Industries Design GET Interview Questions and Answers

Tega Industries Design GET Interview Experiences

1 interview found

(2 Questions)

(1 Question)

(2 Questions)

Interview questions from similar companies

Interview Preparation Tips

Interview Preparation Tips

Interview Questionnaire

3 Questions

Interview Preparation Tips

Skills evaluated in this interview

Interview Questionnaire

1 Question

Interview Questionnaire

1 Question

Interview Preparation Tips

Interview Questionnaire

1 Question

(3 Questions)

Interview Preparation Tips

(1 Question)

Interview Preparation Tips

(1 Question)

Tega Industries Interview FAQs

Recently Viewed

Tega Industries

I-Link

Sokrati

Tega Industries

Tata Group

Tega Industries

Tega Industries

Newzera Tech Labs

Tega Industries

Invesco Mutual Fund

Tell us how to improve this page.

Tega Industries Interviews By Designations

Interview Questions for Popular Designations

Tega Industries Design GET Interview Process

Interview Questions from Similar Companies

Fast track your campus placements