Upload Button Icon Add office photos

TCE

Compare button icon Compare button icon Compare

Filter interviews by

TCE Civil Graduate Engineer Trainee Interview Questions and Answers

Updated 27 Jul 2023

TCE Civil Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via campus placement at National Institute of Technology, (NIT), Sikkim and was interviewed in Jan 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic question related to civil engineering and some questions on aptitude.

Round 3 - Technical 

(1 Question)

  • Q1. Specially questions from RCC and steel structure and about your major project
Round 4 - HR 

(1 Question)

  • Q1. Introduction, some questions on area of intrest and all

Interview Preparation Tips

Topics to prepare for TCE Civil Graduate Engineer Trainee interview:
  • RCC
  • Steel Structures
Interview preparation tips for other job seekers - Try to learn basic knowledge of civil engineering and before interview go through rcc and steel structure questions

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Vellore Institute of Technology (VIT) and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. IS code book for concrete mix design
  • Ans. 

    Yes, IS code book for concrete mix design is available.

    • IS 456:2000 is the code book for plain and reinforced concrete.

    • IS 10262:2009 is the code book for concrete mix design.

    • The IS code book provides guidelines for selecting the appropriate mix proportions based on the desired strength and workability of concrete.

  • Answered by AI
  • Q2. And some extra questions related to Concrete Technology & RCC
Round 2 - HR 

(1 Question)

  • Q1. How would you manage resignation of your best employee?

Interview Preparation Tips

Interview preparation tips for other job seekers - Have strong knowledge on Concrete, RCC, Steel Structures & Construction management.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Questions were of easy level. Both Technical and aptitude test was conducted.

Round 2 - One-on-one 

(1 Question)

  • Q1. Basic questions related to internship and projects.

Interview Preparation Tips

Topics to prepare for Tata Projects Civil Graduate Engineer Trainee interview:
  • Strength of materials
  • Pavement materials
  • Basic civil
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Technical questions regarding Piping.
  • Q2. Layouts and deliverables discussion.

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Indepth Interview.
Thorough preparation required.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Madhav Institute of Technology and Science, Gwalior and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Aptitute were very easy.

Round 2 - Technical 

(5 Questions)

  • Q1. They are questions on ic engine, thermodyanamics, tom, som and also on RAC some on heat transfer.
  • Ans. I have given all answer correctly
  • Answered Anonymously
  • Q2. In interview they have asked more and more on my cv what do you do in internship
  • Ans. I explain them not very long not short just point to point with confidence
  • Answered Anonymously
  • Q3. Many questions on personal character and how will you manage if we shift you there
  • Ans. You have to explain them very visely and such like you are very confident about your answere
  • Answered Anonymously
  • Q4. They have asked me what do you think about your interview , you got selected or not
  • Q5. Technical questions asked by interviewer very much

Interview Preparation Tips

Interview preparation tips for other job seekers - Just hold your breath and stay positive if you dont know answere because they all wanted to test your personal skills and confidence.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
No response

I applied via Campus Placement and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Questions on diesel engine and internal combustion engines
  • Q2. Question on iron carbon graph
  • Q3. Question on refrigeration
Round 2 - Aptitude Test 

Practice as many questions as you can

Round 3 - HR 

(2 Questions)

  • Q1. Skills learned during 4 years of b.tech
  • Ans. 

    Skills learned during 4 years of b.tech include technical knowledge, problem-solving abilities, teamwork, communication skills, and time management.

    • Technical knowledge in engineering principles and practices

    • Problem-solving abilities through projects and assignments

    • Teamwork skills from group projects and collaborations

    • Communication skills through presentations and reports

    • Time management skills to balance coursework and

  • Answered by AI
  • Q2. Project details for last year
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How many brickes need in 1m3
  • Ans. 

    The number of bricks needed in 1m3 depends on the size of the bricks being used.

    • The number of bricks in 1m3 will vary based on the size of the bricks. Standard brick size is 190mm x 90mm x 90mm.

    • For standard size bricks, approximately 500 bricks are needed in 1m3.

    • To calculate the number of bricks needed, divide the volume of 1m3 by the volume of one brick.

  • Answered by AI
  • Q2. Fos for concrete
  • Ans. 

    Fos is a type of admixture used in concrete to improve its workability and durability.

    • Fos is a water-reducing admixture that helps in reducing the water content in concrete mixtures.

    • It improves the workability of concrete, making it easier to place and finish.

    • Fos also enhances the durability of concrete by reducing permeability and increasing strength.

    • Examples of Fos for concrete include polycarboxylate-based admixture

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Jun 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Difference between true power and reactive power
  • Ans. 

    True power is the actual power consumed by a device, while reactive power is the power required to establish and maintain the electromagnetic fields in an AC circuit.

    • True power is measured in watts (W) and represents the actual energy consumed by a device.

    • Reactive power is measured in volt-amperes reactive (VAR) and represents the power required to establish and maintain the electromagnetic fields in an AC circuit.

    • True...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Sallry accepted
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via campus placement at Meghnad Saha Institute of Technology, Kolkata and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(4 Questions)

  • Q1. Draw BMD & SFD of a Simply Supported Beam shown to my screen. Draw it & show that on screen.
  • Ans. 

    The candidate is asked to draw the BMD & SFD of a Simply Supported Beam shown on the screen.

    • Identify the support conditions of the beam (simply supported in this case)

    • Determine the loads acting on the beam and their positions

    • Calculate the reactions at the supports

    • Draw the Bending Moment Diagram (BMD) and Shear Force Diagram (SFD) based on the calculated values

    • Label the diagrams with appropriate values and units

  • Answered by AI
  • Q2. What are the values of Compressive & Tensile Shear Stress on a Singly Reinforced Beam in LSM method?
  • Ans. 

    Compressive shear stress is zero while tensile shear stress is equal to the shear force divided by the cross-sectional area of the beam.

    • Compressive shear stress is zero in a singly reinforced beam according to the Limit State Method (LSM).

    • Tensile shear stress is calculated by dividing the shear force by the cross-sectional area of the beam.

    • For example, if the shear force acting on the beam is 10 kN and the cross-sectio...

  • Answered by AI
  • Q3. Some other civil engineering questions.
  • Q4. Introduce Yourself. This is 1st Question.

Interview Preparation Tips

Interview preparation tips for other job seekers - Moderate level interview.Video Interview.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Technical exam at basic information and technical interview
Round 2 - HR 

(1 Question)

  • Q1. Introduction Technical questions based is code , terminology, process specially RCC etc

Interview Preparation Tips

Topics to prepare for Power Mech Projects Executive Graduate Trainee interview:
  • Strong your technical
  • Give answer don't be polite
Interview preparation tips for other job seekers - Strong your technical

TCE Interview FAQs

How many rounds are there in TCE Civil Graduate Engineer Trainee interview?
TCE interview process usually has 4 rounds. The most common rounds in the TCE interview process are Resume Shortlist, Aptitude Test and Technical.
What are the top questions asked in TCE Civil Graduate Engineer Trainee interview?

Some of the top questions asked at the TCE Civil Graduate Engineer Trainee interview -

  1. specially questions from RCC and steel structure and about your major proj...read more
  2. introduction, some questions on area of intrest and ...read more

Tell us how to improve this page.

TCE Civil Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.5k Interviews
Infosys Interview Questions
3.6
 • 7.6k Interviews
Wipro Interview Questions
3.7
 • 5.7k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.9k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
LTIMindtree Interview Questions
3.8
 • 3k Interviews
Mphasis Interview Questions
3.4
 • 810 Interviews
Tata Projects Interview Questions
4.2
 • 422 Interviews
View all
Assistant Manager
478 salaries
unlock blur

₹4.5 L/yr - ₹12.8 L/yr

Manager
353 salaries
unlock blur

₹6.1 L/yr - ₹16 L/yr

Senior Engineer
321 salaries
unlock blur

₹3.6 L/yr - ₹10 L/yr

Senior Manager
285 salaries
unlock blur

₹10 L/yr - ₹22.5 L/yr

Consultant
254 salaries
unlock blur

₹4 L/yr - ₹12.8 L/yr

Explore more salaries
Compare TCE with

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare

Tech Mahindra

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview