Upload Button Icon Add office photos

Tata Boeing Aerospace

Compare button icon Compare button icon Compare

Filter interviews by

Tata Boeing Aerospace Assistant Quality Executive Interview Questions and Answers

Updated 11 May 2021

Tata Boeing Aerospace Assistant Quality Executive Interview Experiences

1 interview found

I applied via Referral and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Related to quality
  • Q2. Improvements

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview is based on Experience and our skills.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(3 Questions)

  • Q1. What is a lean
  • Q2. What is 7qc tool
  • Q3. What is quality

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality inspector visual inspection leakage testing
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Difference between Cylindercity & concentricity? GD & T Engineering Drawing Instruments
  • Ans. 

    Cylindricity measures how close the entire surface of a cylinder is to a true cylinder, while concentricity measures how close the center points of two circles or cylinders are to being perfectly aligned.

    • Cylindricity is a 3D form control that ensures the entire surface of a cylinder is within a specified tolerance zone.

    • Concentricity is a 2D form control that ensures the center points of two circles or cylinders are ali...

  • Answered by AI
  • Q2. Gd &It's applications
  • Ans. 

    Geometric Dimensioning and Tolerancing (GD&T) is a system for defining and communicating engineering tolerances.

    • GD&T is used to specify the allowable variations in form, size, and orientation of part features.

    • It helps ensure that parts fit together properly and function as intended.

    • GD&T symbols are used on engineering drawings to communicate design requirements.

    • Examples of GD&T symbols include position, concentricity, ...

  • Answered by AI
  • Q3. Instruments & least count
  • Q4. Variable & attributes gauges
  • Q5. SPc & msa explain
  • Ans. 

    SPC (Statistical Process Control) is a method of quality control that uses statistical methods to monitor and control a process. MSA (Measurement System Analysis) is a study that evaluates the measurement system to ensure it is reliable and accurate.

    • SPC involves monitoring and controlling a process using statistical methods like control charts and process capability analysis.

    • MSA evaluates the measurement system to ensu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for GD & T and instruments

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Work related questions
  • Q2. How..you see yourself after 10 years

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident during answering. Technically you should be strong as it is core engineering compay

I applied via Recruitment Consulltant and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Why did you decide to apply to thi
  • Q2. Tell me about your experience in …

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't always follow my passion.
Focus on body language.

Interview Questionnaire 

8 Questions

  • Q1. What is the ionic product of the water
  • Ans. 

    The ionic product of water is the product of the concentrations of hydrogen ions and hydroxide ions in water.

    • The ionic product of water is also known as the dissociation constant of water.

    • It is represented by the symbol Kw.

    • At 25°C, the value of Kw is 1.0 x 10^-14 mol^2/L^2.

    • Kw can be used to calculate the pH and pOH of a solution.

    • The pH of pure water is 7, which means that the concentration of hydrogen ions and hydroxid

  • Answered by AI
  • Q2. How to make fas 0.1 normal solution
  • Ans. 

    To make 0.1 normal solution, dissolve 1.6g of NaOH in 1L of distilled water.

    • Calculate the molecular weight of the solute

    • Determine the molarity of the solution

    • Calculate the volume of solvent needed

    • Weigh the solute and dissolve in the solvent

    • Adjust the volume of the solution to the desired level

  • Answered by AI
  • Q3. How to make sulfuric acid 1 normal and 1molar solution
  • Ans. 

    To make sulfuric acid 1 normal, dilute 1 mole of sulfuric acid to 1 liter of water. To make 1 molar solution, dissolve 1 mole of sulfuric acid in 1 liter of water.

    • To make 1 normal solution, dilute 1 mole of sulfuric acid to 1 liter of water

    • To make 1 molar solution, dissolve 1 mole of sulfuric acid in 1 liter of water

  • Answered by AI
  • Q4. What difference between ISO 9001 , 14001,18001,22001,
  • Ans. 

    ISO 9001, 14001, 18001, and 22001 are all international standards for quality management, environmental management, occupational health and safety management, and food safety management, respectively.

    • ISO 9001 is focused on quality management systems and ensuring customer satisfaction.

    • ISO 14001 is focused on environmental management systems and reducing environmental impact.

    • ISO 18001 is focused on occupational health an...

  • Answered by AI
  • Q5. What is 5s
  • Ans. 

    5S is a workplace organization method that aims to improve efficiency and productivity by eliminating waste and optimizing workflow.

    • Sort - eliminate unnecessary items

    • Set in order - organize remaining items

    • Shine - clean and maintain workplace

    • Standardize - establish procedures and guidelines

    • Sustain - maintain and improve the system

    • Example: organizing tools in a mechanic's garage

  • Answered by AI
  • Q6. What is OHSAS
  • Ans. 

    OHSAS stands for Occupational Health and Safety Assessment Series.

    • It is a framework for managing and improving occupational health and safety.

    • It provides guidelines for identifying and controlling workplace hazards.

    • It helps organizations to comply with legal and regulatory requirements.

    • It is often used in conjunction with ISO 9001 and ISO 14001 standards.

    • Certification to OHSAS 18001 demonstrates an organization's commi

  • Answered by AI
  • Q7. What Difference between molecular weight and equivalent weight
  • Ans. 

    Molecular weight is the sum of the atomic weights of all atoms in a molecule, while equivalent weight is the weight of a substance that reacts with or replaces one mole of hydrogen ions.

    • Molecular weight is expressed in atomic mass units (amu) or grams per mole (g/mol).

    • Equivalent weight is expressed in grams per equivalent (g/eq) or milliequivalents per gram (meq/g).

    • Molecular weight is used to calculate the amount of a ...

  • Answered by AI
  • Q8. Why temperature increases more than 100 'c of boilers steam
  • Ans. 

    Temperature increases more than 100 'c of boilers steam due to pressure buildup and superheating.

    • Boilers are designed to produce steam at high pressure and temperature.

    • The pressure buildup causes the boiling point of water to increase, resulting in superheated steam.

    • Superheated steam is used in various industrial processes that require high temperatures.

    • The temperature increase can also be due to the addition of heat f...

  • Answered by AI
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Experience related

Tata Boeing Aerospace Interview FAQs

What are the top questions asked in Tata Boeing Aerospace Assistant Quality Executive interview?

Some of the top questions asked at the Tata Boeing Aerospace Assistant Quality Executive interview -

  1. Related to quali...read more
  2. Improveme...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Indian Army Interview Questions
4.7
 • 150 Interviews
GE Interview Questions
4.2
 • 106 Interviews
Boeing Interview Questions
3.9
 • 83 Interviews
AIRBUS Interview Questions
3.7
 • 73 Interviews
View all
Executive
67 salaries
unlock blur

₹3 L/yr - ₹7.5 L/yr

Associate
48 salaries
unlock blur

₹1.7 L/yr - ₹5 L/yr

Senior Executive
47 salaries
unlock blur

₹6 L/yr - ₹10 L/yr

Assistant Manager
45 salaries
unlock blur

₹6 L/yr - ₹16.5 L/yr

Junior Executive
43 salaries
unlock blur

₹3 L/yr - ₹5.5 L/yr

Explore more salaries
Compare Tata Boeing Aerospace with

AIRBUS

3.7
Compare

Tata Lockheed Martin Aerostructures

3.8
Compare

Boeing

3.9
Compare

Hindustan Aeronautics

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview