Upload Button Icon Add office photos

Filter interviews by

Span Pumps Maintenance Engineer Interview Questions, Process, and Tips

Updated 17 May 2023

Span Pumps Maintenance Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Do you know about solar panel?
  • Ans. 

    Yes, solar panels are devices that convert sunlight into electricity.

    • Solar panels are made up of photovoltaic cells that absorb sunlight and convert it into direct current (DC) electricity.

    • This DC electricity is then converted into alternating current (AC) electricity through an inverter, which can be used to power homes and businesses.

    • Solar panels are becoming increasingly popular as a renewable energy source due to t...

  • Answered by AI
  • Q2. Working of diode, Batteries, etc.
  • Ans. 

    Diodes allow current to flow in one direction while batteries convert chemical energy into electrical energy.

    • Diodes are semiconductor devices that have a p-n junction and allow current to flow in one direction only.

    • Batteries convert chemical energy into electrical energy through a chemical reaction.

    • The voltage of a battery is determined by the materials used in the electrodes and the electrolyte.

    • Different types of batt...

  • Answered by AI
  • Q3. How does AC Motor Works?
  • Ans. 

    AC motor works on the principle of electromagnetic induction to convert electrical energy into mechanical energy.

    • AC current is supplied to the stator winding, which creates a rotating magnetic field.

    • This rotating magnetic field induces a current in the rotor winding, which creates a magnetic field that interacts with the stator field.

    • The interaction between the two fields causes the rotor to rotate, converting electric...

  • Answered by AI
  • Q4. In house wiring and in which type of power we use ?
  • Ans. 

    In house wiring, we use alternating current (AC) power.

    • AC power is used in most homes and buildings for lighting, appliances, and other electrical needs.

    • The voltage used in house wiring is typically 120 or 240 volts, depending on the country and region.

    • Wiring is typically done with copper or aluminum conductors, and is protected by circuit breakers or fuses.

    • Grounding is an important safety feature in house wiring, prov...

  • Answered by AI
  • Q5. Basic Introduction

Interview Preparation Tips

Interview preparation tips for other job seekers - Be Positive and Confident.

Interview questions from similar companies

Interview Questionnaire 

3 Questions

  • Q1. Technical
  • Q2. Maintenance of machines at diecastin
  • Ans. 

    Maintenance of machines at diecasting involves regular inspections, repairs, and replacements to ensure optimal performance and prevent breakdowns.

    • Regular inspections to identify potential issues

    • Scheduled maintenance to prevent breakdowns

    • Prompt repairs to minimize downtime

    • Replacement of worn-out parts to ensure optimal performance

    • Use of proper lubricants and cleaning agents

    • Training of operators to handle machines prope

  • Answered by AI
  • Q3. Electrical and machcanical
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed before May 2023.

Round 1 - Technical 

(1 Question)

  • Q1. Wires nd cable related

Interview Questionnaire 

3 Questions

  • Q1. About 4 - Stock engine and 2 stock engine
  • Q2. Bernoulli theorem
  • Ans. 

    Bernoulli theorem explains the relationship between fluid velocity, pressure, and elevation.

    • Bernoulli theorem states that as the velocity of a fluid increases, its pressure decreases.

    • It is based on the principle of conservation of energy in fluid flow.

    • The theorem is commonly used in fluid dynamics and aerodynamics.

    • It can be applied to various situations like flow through pipes, airfoils, and nozzles.

    • For example, when w...

  • Answered by AI
  • Q3. Different bw AC and DC
  • Ans. 

    AC and DC are two types of electrical current. AC changes direction periodically while DC flows in one direction.

    • AC stands for Alternating Current and DC stands for Direct Current.

    • AC changes direction periodically, typically at a frequency of 50 or 60 Hz.

    • DC flows in one direction continuously.

    • AC is used for power transmission over long distances.

    • DC is commonly used in batteries and electronic devices.

    • AC can be easily c...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't fell heritage
Giving the answer to coll minde whitout presser

I applied via Campus Placement and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Na

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep updated with latest technology

I applied via Naukri.com and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Mechanical Seal Leakage how to say primary Seal Or Secondary seal Problem
  • Ans. 

    Identifying primary or secondary seal problem in case of mechanical seal leakage.

    • Check the location of the leakage to determine if it's the primary or secondary seal

    • Primary seal leakage occurs on the product side while secondary seal leakage occurs on the atmospheric side

    • Inspect the seal faces for wear and damage to identify the root cause of the leakage

    • Check the seal flush and quench connections for blockages or impro...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice You Can Join With Us Great Learning Opportunities
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Technical interview
Round 3 - HR 

(2 Questions)

  • Q1. Very good hr policy
  • Q2. Tell me about your self

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Fan open and repair and maintenance
  • Q2. Induction repair and maintenance
  • Q3. Geyser chek and repair

Interview Preparation Tips

Interview preparation tips for other job seekers - Feild work coustomer satisfaction and also happy coustomer
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Plant maintenance
  • Q2. Technical hydraulic
  • Q3. Manage department
Round 2 - One-on-one 

(2 Questions)

  • Q1. Maintenance tools
  • Q2. Department manage

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice interview
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Goal to be achieved ?
  • Ans. 

    To provide excellent service to customers and ensure their satisfaction with the product.

    • To troubleshoot and resolve technical issues promptly

    • To maintain a high level of communication with customers

    • To continuously improve technical knowledge and skills

    • To meet or exceed service level agreements

    • To contribute to the growth and success of the company

  • Answered by AI
  • Q2. Process of performance evaluation ?
  • Ans. 

    Performance evaluation involves setting goals, measuring progress, providing feedback, and making necessary adjustments.

    • Establish clear and measurable goals for the employee

    • Regularly monitor and track progress towards those goals

    • Provide constructive feedback on strengths and areas for improvement

    • Make necessary adjustments to goals or expectations as needed

    • Document the evaluation process and outcomes for future referenc

  • Answered by AI
  • Q3. This roles problem to be solved ?
Round 3 - HR 

(1 Question)

  • Q1. Texmo industries my future kya hai ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay positive
Positivity and persistence are key stay optimistic throughout the process and keep going unitl you achieve your goal .
Lynda zuges managing directors of the workforce counsultants.

Span Pumps Interview FAQs

What are the top questions asked in Span Pumps Maintenance Engineer interview?

Some of the top questions asked at the Span Pumps Maintenance Engineer interview -

  1. In house wiring and in which type of power we us...read more
  2. Do you know about solar pan...read more
  3. How does AC Motor Wor...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Ksb Pumps Interview Questions
3.9
 • 27 Interviews
C.R.I. Pumps Interview Questions
3.8
 • 27 Interviews
Shakti Pumps Interview Questions
3.8
 • 24 Interviews
Veolia Interview Questions
4.1
 • 12 Interviews
View all
Span Pumps Maintenance Engineer Salary
based on 5 salaries
₹2 L/yr - ₹3.5 L/yr
24% less than the average Maintenance Engineer Salary in India
View more details

Span Pumps Maintenance Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Executive Accountant
14 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Back Office Executive
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Accounts Executive
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Embedded Software Engineer
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Field Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Span Pumps with

Crompton Greaves Consumer Electricals

3.8
Compare

Kirloskar Brothers

3.8
Compare

Ksb Pumps

3.9
Compare

Grundfos Pumps

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview