Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Sigma Electric Manufacturing Corporation Production Graduate Engineer Trainee Interview Questions and Answers

Updated 10 May 2024

Sigma Electric Manufacturing Corporation Production Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is casting and its type?
  • Ans. 

    Casting is a manufacturing process in which a liquid material is poured into a mold, where it solidifies into the desired shape.

    • Casting involves pouring molten metal, plastic, or other materials into a mold

    • Types of casting include sand casting, investment casting, die casting, and centrifugal casting

    • Sand casting is the most common type, using sand as the mold material

    • Investment casting uses a wax pattern that is melted...

  • Answered by AI

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Tell about favourite subject
  • Q2. Types of braking system
  • Ans. 

    Braking systems are used in vehicles to slow down or stop the vehicle by converting kinetic energy into heat energy.

    • Mechanical braking system: uses friction to slow down the vehicle (e.g. drum brakes)

    • Hydraulic braking system: uses fluid pressure to transfer force to the brake pads (e.g. disc brakes)

    • Regenerative braking system: converts kinetic energy into electrical energy to recharge the battery (e.g. in hybrid or ele

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Mar 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Aptitude test is easy

Round 3 - Group Discussion 

Group discussion is very best

Round 4 - One-on-one 

(1 Question)

  • Q1. Discussed about projecy

Interview Preparation Tips

Interview preparation tips for other job seekers - Do your best
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

General aptitude test

Round 3 - Technical 

(1 Question)

  • Q1. Just basic from your background if your branch is electrical then go with the basic of electrical
Round 4 - HR 

(1 Question)

  • Q1. Combination of technical and hr
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jun 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

It was easy round, just basic calculations

Round 2 - HR 

(2 Questions)

  • Q1. What's your skills
  • Q2. Which Softwares you worked on. Something like these questions asked

I applied via Naukri.com and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Personal information
Round 3 - Technical 

(2 Questions)

  • Q1. Job responsibilities
  • Q2. Asking about previous company and skills, job responsibility
  • Ans. Not give negative response of previous company
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest and confident good communication skills are needed for best interview

Interview Questionnaire 

4 Questions

  • Q1. What is oee.
  • Ans. 

    OEE stands for Overall Equipment Efficiency. It is a measure of how effectively a manufacturing operation is utilized.

    • OEE is calculated by multiplying Availability, Performance, and Quality.

    • Availability measures the percentage of time that equipment is available for production.

    • Performance measures the speed at which the equipment operates compared to its designed speed.

    • Quality measures the percentage of good-quality pr...

  • Answered by AI
  • Q2. What is production planning in shopfloar.
  • Ans. 

    Production planning in shopfloor involves creating a detailed plan for manufacturing processes to ensure efficient and timely production.

    • Production planning involves determining the sequence of operations, resources required, and estimated time for each task.

    • It includes creating a production schedule, allocating resources, and coordinating with different departments.

    • The goal is to optimize production, minimize downtime...

  • Answered by AI
  • Q3. What is productivity.
  • Ans. 

    Productivity is the measure of efficiency and output in relation to the resources used.

    • Productivity is a measure of how efficiently resources are used to produce goods or services.

    • It is the ratio of output to input, indicating how much is produced per unit of input.

    • Higher productivity means achieving more output with the same or fewer resources.

    • For example, in manufacturing, productivity can be measured by the number o...

  • Answered by AI
  • Q4. What is 5s.
  • Ans. 

    5S is a methodology used to organize and maintain a clean, efficient, and safe work environment.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

    • Sort involves removing unnecessary items from the workplace.

    • Set in Order focuses on arranging necessary items in a logical and efficient manner.

    • Shine involves cleaning and maintaining the workplace.

    • Standardize establishes guidelines and procedures for maintain...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Approached by Company and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is the difference between hard work and smart work?
  • Q2. Can you work under pressure?

Interview Preparation Tips

Topics to prepare for Ramkrishna Forgings Production Supervisor interview:
  • Production Engineering
  • Supervisor
Interview preparation tips for other job seekers - Safety first production must.
Production first quality must.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Process of current company
  • Ans. 

    The current company follows a systematic process for production to ensure efficiency and quality.

    • The production process starts with planning and scheduling of orders.

    • Raw materials are sourced and inspected for quality before being used in production.

    • Machinery and equipment are maintained regularly to ensure smooth operations.

    • Quality control checks are conducted at various stages of production to maintain high standards...

  • Answered by AI
  • Q2. Problem comes during production
  • Ans. 

    Problem during production requires quick identification, analysis, and resolution to minimize downtime and ensure quality output.

    • Quickly identify the root cause of the problem

    • Analyze the impact on production schedule and quality

    • Implement immediate corrective actions to resolve the issue

    • Communicate with relevant stakeholders to keep them informed

    • Document the problem and solution for future reference

  • Answered by AI
  • Q3. About machine & process
  • Q4. Drawing of job & description
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Topics to prepare for Ramkrishna Forgings Production Engineer interview:
  • Production Planning
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Programming tooling and operating
Round 3 - HR 

(1 Question)

  • Q1. Salary negotiation
Contribute & help others!
anonymous
You can choose to be anonymous

Sigma Electric Manufacturing Corporation Interview FAQs

How many rounds are there in Sigma Electric Manufacturing Corporation Production Graduate Engineer Trainee interview?
Sigma Electric Manufacturing Corporation interview process usually has 1 rounds. The most common rounds in the Sigma Electric Manufacturing Corporation interview process are Technical.

Recently Viewed

CAMPUS PLACEMENT

LD College of Engineering, Ahmedabad

CAMPUS PLACEMENT

PSG College of Technology, Coimbatore

CAMPUS PLACEMENT

Indian Institute of Technology (IIT), Mumbai

INTERVIEWS

PressureJet Systems

No Interviews

CAMPUS PLACEMENT

SSN College of Engineering, Chennai

INTERVIEWS

Bosch Rexroth India

No Interviews

INTERVIEWS

PressureJet Systems

No Interviews

INTERVIEWS

Kyb Motorcycle Suspension

No Interviews

INTERVIEWS

Futures First info Services

5.6k top interview questions

INTERVIEWS

PressureJet Systems

No Interviews

Tell us how to improve this page.

Sigma Electric Manufacturing Corporation Production Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

John Deere Interview Questions
4.1
 • 228 Interviews
Caterpillar Inc Interview Questions
4.3
 • 178 Interviews
UNO Minda Interview Questions
4.0
 • 167 Interviews
Atlas Copco Interview Questions
4.2
 • 78 Interviews
TÜV SÜD Interview Questions
3.9
 • 60 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
View all
Diploma Trainee Engineer
409 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
352 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
112 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
89 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Sigma Electric Manufacturing Corporation with

Precision Camshafts

3.2
Compare

Bharat Forge

3.9
Compare

TVS Sundram Fasteners

3.7
Compare

Samvardhana Motherson Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent