Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by SHYAM METALICS AND ENERGY Team. If you also belong to the team, you can get access from here

SHYAM METALICS AND ENERGY Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

SHYAM METALICS AND ENERGY Junior Engineer Interview Questions and Answers

Updated 25 Dec 2023

SHYAM METALICS AND ENERGY Junior Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Electrical basis questions. As that ckt. diagrams of motor satr and delta connection control & power supply.
  • Q2. Motor megger value & cable size as per rating of motor.
  • Ans. 

    Motor megger value should be at least twice the rated voltage of the motor. Cable size should be selected based on the full load current of the motor.

    • Motor megger value should be at least 2 times the rated voltage of the motor to ensure insulation integrity.

    • Cable size should be selected based on the full load current of the motor to prevent overheating and voltage drop.

    • For example, for a motor rated at 400V, the megger...

  • Answered by AI
  • Q3. OLR value of motor as per rating of motor & MPCB rating.
  • Ans. 

    OLR value of a motor is determined by the rating of the motor and the MPCB rating.

    • OLR value is the Overload Relay value, which is used to protect the motor from overload conditions.

    • The OLR value is typically set based on the rating of the motor and the rating of the Motor Protection Circuit Breaker (MPCB).

    • For example, if a motor has a rating of 5 HP and the MPCB rating is 10A, the OLR value would be calculated accordin

  • Answered by AI

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is your work experience
  • Q2. What is your role

Interview Preparation Tips

Interview preparation tips for other job seekers - Tough interview

Interview Questionnaire 

3 Questions

  • Q1. Knowledge component
  • Q2. Knowledge electronic devices
  • Q3. Life discission
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Handling loss of RMHS materials
  • Ans. 

    Handling loss of RMHS materials involves proper inventory management, tracking systems, and security measures.

    • Implement a robust inventory management system to track all RMHS materials

    • Regularly conduct audits to ensure accuracy of inventory records

    • Utilize security measures such as surveillance cameras, access control systems, and restricted access areas

    • Train staff on proper handling and storage procedures to prevent lo...

  • Answered by AI
  • Q2. Blast furnace phosphorus reaction
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Designation to be give as per experience, knowledge, and Qualifications

I applied via Referral and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me Something about You ?
  • Q2. Why Should we Hire you ?
Round 2 - Technical 

(3 Questions)

  • Q1. What do you mean by Design Steps ?
  • Ans. 

    Design steps refer to the process of creating a plan or blueprint for a product or system.

    • Identifying the problem or need

    • Researching and gathering information

    • Brainstorming and generating ideas

    • Creating sketches or prototypes

    • Testing and evaluating the design

    • Refining and finalizing the design

    • Implementing and producing the final product

  • Answered by AI
  • Q2. How you will be leader in new Product Development ?
  • Q3. How you will do automation in our existing continuous process ?
  • Ans. 

    I will analyze the process flow, identify repetitive tasks, and implement automation tools to streamline the process.

    • Analyze the current process flow

    • Identify repetitive tasks that can be automated

    • Select appropriate automation tools

    • Implement automation tools and test thoroughly

    • Monitor and optimize the automated process

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Must Knowledge of Metallurgy Field with Process Excellence

Skills evaluated in this interview

I applied via Approached by Company and was interviewed in Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is hanging Why bosh slag is limy What is raft Raw material analysis What is csr n cri Tuyer burning signs and actions Roll of operation shift incharge
  • Ans. 

    A list of technical questions related to engineering.

    • Hanging refers to the suspension of an object from a fixed point.

    • Bosh slag is limy due to the presence of calcium oxide in the slag.

    • A raft is a floating platform used for various purposes such as transportation or construction.

    • Raw material analysis involves testing and analyzing the composition of materials used in production processes.

    • CSR (Coke Strength after Reacti...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer gently and smartly
Know the basic metallurgy

I applied via Approached by Company and was interviewed in Aug 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What percent of Alumina is best for sinter
  • Ans. 

    The best percentage of Alumina for sintering depends on the specific material and desired properties.

    • The optimal percentage of Alumina for sintering can vary depending on the material being processed.

    • Generally, Alumina content in the range of 5-30% is common for sintering ceramics.

    • Higher Alumina content can lead to increased strength and hardness, but may also make the material more brittle.

    • Lower Alumina content may re...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. Electrical related. Question will
  • Q2. Already 5 year experience in Electrical field
  • Q3. Get electrical project ideas for in house improvements
  • Ans. 

    Some electrical project ideas for in house improvements include installing smart home technology, upgrading lighting fixtures, and adding solar panels.

    • Install smart home technology for energy efficiency and convenience

    • Upgrade lighting fixtures to improve aesthetics and energy efficiency

    • Add solar panels to reduce electricity costs and environmental impact

  • Answered by AI
  • Q4. Project planning: Develop the project plan and construction schedule
Round 2 - Aptitude Test 

Sap pm and electrically

I applied via Naukri.com and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is proxy? what is smps? what is encoder? Star delta working
  • Ans. 

    Proxy is an intermediary server that acts as a gateway between clients and servers. SMPS is a power supply unit that converts AC to DC. Encoder is a device that converts motion into digital signals. Star delta is a method of starting three-phase motors.

    • Proxy helps in hiding the identity of clients and servers.

    • SMPS is commonly used in computers and other electronic devices.

    • Encoders are used in robotics, automation, and ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for electrical basics and field instruments

I applied via Naukri.com and was interviewed in Feb 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical question and hr round with some known question like what is your goal, how you prepare your self in future etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Be steady, be confident

SHYAM METALICS AND ENERGY Interview FAQs

How many rounds are there in SHYAM METALICS AND ENERGY Junior Engineer interview?
SHYAM METALICS AND ENERGY interview process usually has 2 rounds. The most common rounds in the SHYAM METALICS AND ENERGY interview process are Technical and Resume Shortlist.
What are the top questions asked in SHYAM METALICS AND ENERGY Junior Engineer interview?

Some of the top questions asked at the SHYAM METALICS AND ENERGY Junior Engineer interview -

  1. Motor megger value & cable size as per rating of mot...read more
  2. OLR value of motor as per rating of motor & MPCB rati...read more
  3. Electrical basis questions. As that ckt. diagrams of motor satr and delta conn...read more

Tell us how to improve this page.

SHYAM METALICS AND ENERGY Junior Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Electrotherm Interview Questions
4.2
 • 33 Interviews
Tata Metaliks Interview Questions
4.0
 • 32 Interviews
Bmm Ispat Interview Questions
3.8
 • 28 Interviews
Welspun Corp Interview Questions
4.0
 • 28 Interviews
View all
SHYAM METALICS AND ENERGY Junior Engineer Salary
based on 70 salaries
₹1.5 L/yr - ₹3.3 L/yr
27% less than the average Junior Engineer Salary in India
View more details

SHYAM METALICS AND ENERGY Junior Engineer Reviews and Ratings

based on 14 reviews

4.0/5

Rating in categories

4.1

Skill development

4.2

Work-life balance

3.3

Salary

4.5

Job security

3.9

Company culture

3.5

Promotions

3.9

Work satisfaction

Explore 14 Reviews and Ratings
Engineer
215 salaries
unlock blur

₹2.1 L/yr - ₹6.1 L/yr

Assistant Engineer
208 salaries
unlock blur

₹1.5 L/yr - ₹4.5 L/yr

Senior Engineer
165 salaries
unlock blur

₹2.7 L/yr - ₹8.2 L/yr

Assistant Manager
157 salaries
unlock blur

₹3.4 L/yr - ₹9.6 L/yr

Mechanical Engineer
71 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Explore more salaries
Compare SHYAM METALICS AND ENERGY with

Jai Balaji Group

3.5
Compare

Electrotherm

4.2
Compare

Welspun Corp

4.0
Compare

Jayaswal Neco Industries

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview