i
Schwing Stetter
Filter interviews by
I applied via Referral and was interviewed in May 2017. There were 5 interview rounds.
The type of oil used in a gear box depends on the specific requirements of the gear system.
The oil should have the appropriate viscosity to ensure smooth operation of the gears.
Gear oils are typically formulated with additives to provide protection against wear, corrosion, and foaming.
Different gear systems may require different types of oil, such as mineral oil, synthetic oil, or semi-synthetic oil.
For example, a high...
The type of oil used in air compressors is typically compressor oil.
Compressor oil is specifically designed for lubricating air compressors.
It helps reduce friction and heat generated during compression.
The oil also helps to seal and cool the compressor components.
Different types of compressors may require different grades or viscosities of oil.
Examples of compressor oil include mineral-based, synthetic, and semi-synth
Yes, I am willing and able to travel all over India for the role of Junior Field Engineer.
I am flexible and willing to travel for work assignments.
I have experience traveling for work in previous roles.
I understand the importance of being able to travel to different locations for field engineering work.
I applied via Company Website and was interviewed in Jul 2024. There were 2 interview rounds.
Expectations with overall experience include continuous learning, growth, leadership opportunities, and contributing to the success of the organization.
Continuous learning and skill development through challenging projects
Opportunities for growth and advancement within the company
Leadership roles and responsibilities to showcase expertise and mentor others
Contributing to the success of the organization through innovati
I was interviewed in Jan 2025.
Normal reasoning questions ⁉️
What people are saying about Schwing Stetter
I applied via Company Website and was interviewed in Aug 2024. There was 1 interview round.
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to the resistance of the conductor.
Ohm's law is expressed as V = I * R, where V is voltage, I is current, and R is resistance.
It can also be written as I = V / R and R = V / I.
Ohm's law is used to calculate the relationship between voltage, current, and resistance in electrical circ...
Symbols of electrical equipment represent different components and functions in electrical circuits.
Resistor: zigzag line
Capacitor: two parallel lines
Inductor: coil symbol
Diode: arrow pointing towards a line
Transistor: three arrows
Ground: three horizontal lines
Battery: two parallel lines with a + and - sign
Schwing Stetter interview questions for popular designations
I applied via Referral and was interviewed in Nov 2024. There was 1 interview round.
I am a highly motivated and experienced Sales Engineer with a strong technical background and a proven track record of exceeding sales targets.
Over 5 years of experience in sales engineering
Strong technical background in [specific industry or technology]
Proven track record of exceeding sales targets by [specific percentage or amount]
Excellent communication and presentation skills
Ability to build and maintain strong cus
Worked as a Sales Engineer at XYZ Company for 3 years, responsible for technical sales support and customer relationship management.
Provided technical expertise to customers during sales process
Developed and maintained relationships with key clients
Collaborated with sales team to meet and exceed sales targets
Get interview-ready with Top Schwing Stetter Interview Questions
I applied via Campus Placement
It was easy basis aptitude questions
Different types of joints include hinge joints, ball-and-socket joints, pivot joints, and gliding joints.
Hinge joints allow movement in one direction, like the elbow or knee
Ball-and-socket joints allow for a wide range of motion, like the shoulder or hip
Pivot joints allow for rotation, like the neck
Gliding joints allow for sliding movements, like in the wrist or ankle
Basic requirements for welding a table include material selection, joint design, welding process, and finishing.
Selecting the appropriate material for the table based on strength and durability requirements
Designing strong and stable joints for the table structure
Choosing the right welding process such as MIG, TIG, or stick welding
Applying proper finishing techniques to ensure a clean and polished look
Examples: Using s...
I applied via Referral and was interviewed in Nov 2024. There were 2 interview rounds.
Group Discussion about product line
Strength of the material refers to its ability to withstand applied force without failure.
Strength can be measured in terms of tensile strength, compressive strength, shear strength, etc.
Materials with high strength are often used in structural applications.
Examples of strong materials include steel, titanium, and carbon fiber.
Theory of machine is a branch of engineering that deals with the study of machines and their mechanisms.
Theory of machine focuses on understanding the principles behind the operation of machines.
It involves studying the kinematics and dynamics of machines.
Examples include studying the motion of a piston in an engine or the movement of gears in a gearbox.
There are various types of car engines, including gasoline, diesel, electric, and hybrid engines.
Gasoline engines are the most common type used in cars and run on gasoline fuel.
Diesel engines are more fuel-efficient than gasoline engines and run on diesel fuel.
Electric engines are powered by electricity and produce zero emissions.
Hybrid engines combine gasoline and electric power sources for improved fuel efficiency.
Ot...
I was interviewed before Feb 2024.
The duration is 30 minutes, covering topics such as the basics from the B.Tech syllabus in Mechanical Engineering, quantitative aptitude, English, and reasoning.
A topic related to the current global scenario was provided for the group discussion round.
I applied via Campus Placement
It is general quantitative, verbal, technical questions
Reheat and regenerative cycles are thermodynamic processes used in power plants to improve efficiency.
Reheat cycle involves reheating steam after it has passed through the high-pressure turbine to increase its temperature and efficiency.
Regenerative cycle involves extracting steam from the turbine at various stages to preheat the feedwater before it enters the boiler.
Both cycles aim to increase the overall efficiency o...
The duration of Schwing Stetter interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 43 interviews
Interview experience
based on 452 reviews
Rating in categories
Service Engineer
207
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Sales Engineer
79
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Engineer
64
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
56
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
54
salaries
| ₹0 L/yr - ₹0 L/yr |
Putzmeister India
Ajax Fiori Engineering
Conmat Heavy Industries Pvt Ltd
Sany Heavy Industry