Upload Button Icon Add office photos

Filter interviews by

Sanjeev Auto Parts Manufacturers Team Lead Interview Questions and Answers

Updated 23 Sep 2022

Sanjeev Auto Parts Manufacturers Team Lead Interview Experiences

1 interview found

Team Lead Interview Questions & Answers

user image Anonymous

posted on 23 Sep 2022

I applied via Referral and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Psychometric test for candidate

Round 3 - Technical 

(2 Questions)

  • Q1. EHS activity for processes
  • Ans. 

    EHS activities are essential for ensuring the safety of employees and the environment during processes.

    • Identify potential hazards and risks associated with the process

    • Develop and implement safety procedures and protocols

    • Train employees on proper safety practices

    • Regularly monitor and evaluate the effectiveness of EHS activities

    • Maintain compliance with relevant regulations and standards

    • Examples: conducting safety audits,...

  • Answered by AI
  • Q2. Legal activity carried out
  • Ans. 

    Legal activity refers to any activity that is permitted by law and does not violate any legal regulations.

    • Legal activity can include things like starting a business, buying property, or filing a lawsuit.

    • It is important to ensure that any legal activity is carried out in compliance with all applicable laws and regulations.

    • Examples of illegal activities include fraud, theft, and drug trafficking.

    • Legal activity can vary d...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Get confident for interview. Technical you should have knowledge.

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Nov 2018. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Basic introduction questions were putted from HR side were as the first technical round was easy were question related to your daily work management and key responsibilities were asked.
  • Q2. Being a production engineer some basic questions related to manufacturing standards were asked.
  • Q3. Question related to Job description and KRA were asked

Interview Preparation Tips

General Tips: For production engineers just focus on ISO STANDARDS ,EMS,OHSAS,IATF 16949:2016 and IMS related questions...
Skills: Technical Skill, Communication And Confidence, Body Language, Problem Solving, Decision Making Skills
Duration: <1 week

I applied via Recruitment Consultant and was interviewed before Dec 2018. There were 3 interview rounds.

Interview Questionnaire 

11 Questions

  • Q1. Phase in APQP, when submit PPAP
  • Ans. 

    PPAP submission is the final phase of APQP.

    • PPAP submission is the final step in the APQP process.

    • It involves submitting a Production Part Approval Process (PPAP) to the customer.

    • PPAP includes documentation and samples that demonstrate the product meets customer requirements.

    • PPAP submission is necessary before production can begin.

    • PPAP submission is a critical step in ensuring product quality and customer satisfaction.

  • Answered by AI
  • Q2. Five phase in APQP, PPAP is submitted in 4th phase
  • Ans. 

    APQP consists of five phases, with PPAP being submitted in the fourth phase.

    • APQP stands for Advanced Product Quality Planning.

    • The five phases of APQP are: Planning and Program Definition, Product Design and Development, Process Design and Development, Product and Process Validation, and Launch, Feedback, Assessment, and Corrective Action.

    • PPAP stands for Production Part Approval Process.

    • PPAP is submitted in the fourth p...

  • Answered by AI
  • Q3. How to make PPT
  • Ans. 

    To make a PPT, use a software like PowerPoint or Google Slides and follow a structure with clear and concise content.

    • Choose a template or create your own design

    • Add relevant and visually appealing images

    • Use bullet points and short sentences

    • Practice your presentation before presenting

    • Include a conclusion and call to action

  • Answered by AI
  • Q4. How to do process audit
  • Ans. 

    Process audit involves reviewing and evaluating a company's procedures and policies to ensure they are effective and efficient.

    • Identify the process to be audited

    • Define the audit objectives and scope

    • Select the audit team and assign roles

    • Gather and analyze data

    • Identify areas for improvement

    • Develop and implement corrective actions

    • Monitor and follow up on corrective actions

    • Document the audit findings and recommendations

  • Answered by AI
  • Q5. As per control plan
  • Q6. What you do when a customer complaint
  • Ans. 

    When a customer complaint arises, I listen attentively, empathize with their concerns, investigate the issue, propose a solution, and follow up to ensure satisfaction.

    • Listen attentively to the customer's complaint

    • Empathize with their concerns and show understanding

    • Investigate the issue by gathering relevant information

    • Propose a solution or offer alternatives to address the complaint

    • Follow up with the customer to ensure

  • Answered by AI
  • Q7. First I will take entrim action as well as I inform to my team & related department via mail or by face.
  • Q8. How
  • Ans. 

    Can you please clarify the question?

    • I'm sorry, I don't understand what you're asking.

    • Could you please rephrase the question?

    • I need more information to answer that question.

  • Answered by AI
  • Q9. First I depute someone at customer line then customer store, then warehouse if any, then our FG, then WIP & store if problem related to BOP part
  • Q10. How & when to develop gauge & fixture during NPD
  • Ans. 

    Gauges and fixtures should be developed during the design phase of NPD to ensure quality and efficiency.

    • Identify critical dimensions and tolerances early on

    • Develop gauges and fixtures to measure and verify these dimensions

    • Test and refine gauges and fixtures throughout the design process

    • Ensure gauges and fixtures are compatible with manufacturing processes

    • Finalize gauges and fixtures before production begins

  • Answered by AI
  • Q11. During 2nd phase, first I identify gauge or fixture required for which station, if there is inhouse facility then fix meeting for understanding concept to toolroom if not possible to meke inhouse than cal...

Interview Preparation Tips

Interview preparation tips for other job seekers - Dressing sence- Wear neat & clean & well ironed formal shirt not dark colour & formal shoes.
Clean Nails or cutted properly.
Reach at interview sight 10 to 15 minutes before scheduled time.
Eye contact.
No any hesitation.
Switch off your mobile etc

I applied via Naukri.com and was interviewed in May 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Introduce yourself, education, background experience
  • Q2. What is the profile in current company
Round 3 - HR 

(1 Question)

  • Q1. Repeated questions were confronted whilesecond interview
Round 4 - One-on-one 

(1 Question)

  • Q1. Introduction, working profile, company profile, why to change the job
Round 5 - One-on-one 

(1 Question)

  • Q1. Repeated questions again from seniors why to change and salary expectation

Interview Preparation Tips

Interview preparation tips for other job seekers - Quite good experience one to one rounds to get offer letter.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About salary discussion
Round 3 - One-on-one 

(1 Question)

  • Q1. Nothing specific

Interview Preparation Tips

Interview preparation tips for other job seekers - If you demanding low salary ,then your chances is very high
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is lean manufacturing 7qc tools What is machine efficiency how calculate, what is OEE and how can increase productivity and minimize product cost
  • Ans. 

    Lean manufacturing is a systematic approach to minimize waste and maximize value in production processes.

    • Lean manufacturing aims to eliminate waste, such as overproduction, waiting time, and defects.

    • It focuses on continuous improvement and involves all employees in identifying and solving problems.

    • The 7QC tools are a set of quality control tools used in lean manufacturing, including Pareto charts, cause-and-effect diag...

  • Answered by AI
  • Q2. Please see above questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare these questions
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Personal information
  • Q2. Reason to leave
Round 3 - Technical 

(3 Questions)

  • Q1. About my previous job
  • Q2. Previous job KPI
  • Ans. 

    My previous job KPI was to increase sales revenue by 20% within a year.

    • My KPI was to increase sales revenue by 20% within a year

    • I achieved this by implementing targeted marketing campaigns

    • I also optimized the sales process to improve efficiency

    • Regularly analyzed sales data to identify areas for improvement

  • Answered by AI
  • Q3. Targets and achievements
Round 4 - Group Discussion 

Interview with Plant Chairman

Interview Preparation Tips

Interview preparation tips for other job seekers - Make Contacts with Conseltancy
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - One-on-one 

(3 Questions)

  • Q1. What is your perspective on Daily Routine Management (DRM)?
  • Ans. 

    Daily Routine Management (DRM) optimizes productivity by structuring daily tasks and priorities effectively.

    • Establishing clear goals: Setting daily, weekly, and monthly objectives helps maintain focus.

    • Time blocking: Allocating specific time slots for tasks can enhance concentration and efficiency.

    • Prioritization: Using methods like the Eisenhower Matrix to distinguish between urgent and important tasks.

    • Regular reviews: ...

  • Answered by AI
  • Q2. How do you address new process development, and what procedures do you follow?
  • Ans. 

    I follow a structured approach to new process development, ensuring thorough analysis, testing, and implementation.

    • Conduct a needs assessment to identify the problem or opportunity for improvement.

    • Research existing processes and technologies to gather insights and best practices.

    • Develop a detailed project plan outlining objectives, timelines, and resources required.

    • Prototype the new process and conduct pilot testing to...

  • Answered by AI
  • Q3. What is the process for conducting a Process Failure Mode and Effects Analysis (PFMEA)?
  • Ans. 

    PFMEA is a systematic approach to identify and mitigate potential process failures and their effects.

    • 1. Define the scope: Identify the process to be analyzed, such as assembly or manufacturing.

    • 2. Assemble a team: Include cross-functional members like engineers, quality, and production staff.

    • 3. Identify potential failure modes: List ways the process could fail, e.g., incorrect assembly.

    • 4. Determine effects of failures: ...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Case Study 

Imformation industries

Round 3 - Technical 

(13 Questions)

  • Q1. What is work time
  • Q2. Work time 12 hours
  • Q3. My favrite jobs resarch in devlopment
  • Q4. Group discotion very important
  • Q5. Industries devlopment is veryimportant
  • Q6. Work is very hard
  • Q7. Industries futur devlopment is managment important
  • Q8. Time to time work is very important
  • Q9. Worker education and skill important
  • Q10. Night and day all time work very important
  • Q11. Workr deegree important
  • Q12. Industries work imformation is very important
  • Q13. Industries managment and devlopment all manager discotion important
Round 1 - HR 

(6 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. Tell me about yourself.
Round 2 - Technical 

(1 Question)

  • Q1. About Daily Job Responsibility
Round 3 - Aptitude Test 

Excel

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and Honest about your job.

Sanjeev Auto Parts Manufacturers Interview FAQs

How many rounds are there in Sanjeev Auto Parts Manufacturers Team Lead interview?
Sanjeev Auto Parts Manufacturers interview process usually has 3 rounds. The most common rounds in the Sanjeev Auto Parts Manufacturers interview process are Resume Shortlist, Aptitude Test and Technical.
What are the top questions asked in Sanjeev Auto Parts Manufacturers Team Lead interview?

Some of the top questions asked at the Sanjeev Auto Parts Manufacturers Team Lead interview -

  1. EHS activity for proces...read more
  2. Legal activity carried ...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Global Autotech Interview Questions
4.0
 • 47 Interviews
Ag Industries Interview Questions
4.0
 • 40 Interviews
Mungi Group Interview Questions
3.9
 • 22 Interviews
NGK Spark Plugs Interview Questions
4.1
 • 22 Interviews
Mikuni Interview Questions
4.2
 • 21 Interviews
Alf Engineering Interview Questions
4.0
 • 21 Interviews
EXEDY Interview Questions
3.6
 • 21 Interviews
View all
Sanjeev Auto Parts Manufacturers Team Lead Salary
based on 20 salaries
₹4.7 L/yr - ₹9.5 L/yr
20% less than the average Team Lead Salary in India
View more details

Sanjeev Auto Parts Manufacturers Team Lead Reviews and Ratings

based on 6 reviews

4.2/5

Rating in categories

4.6

Skill development

4.2

Work-life balance

4.1

Salary

4.2

Job security

3.7

Company culture

4.0

Promotions

4.2

Work satisfaction

Explore 6 Reviews and Ratings
Specialist
28 salaries
unlock blur

₹0.9 L/yr - ₹7 L/yr

Production Engineer
27 salaries
unlock blur

₹1.5 L/yr - ₹4.5 L/yr

Quality Engineer
23 salaries
unlock blur

₹1.2 L/yr - ₹4.5 L/yr

Team Lead
20 salaries
unlock blur

₹4.7 L/yr - ₹9.5 L/yr

Senior Engineer
15 salaries
unlock blur

₹3.7 L/yr - ₹5.8 L/yr

Explore more salaries
Compare Sanjeev Auto Parts Manufacturers with

Ag Industries

4.0
Compare

Toyoda Gosei Minda

4.2
Compare

Ralson Tyres Limited

3.7
Compare

Global Autotech

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview