AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Saisanket Industries Interview Questions and Answers
14 Interview questions
The number of bricks in 1 cubic meter varies depending on the size of the bricks.
The size of the bricks affects the number of bricks in 1 cubic meter.
Standard brick sizes are commonly used in construction.
Calculating the number of bricks requires knowing the dimensions of the bricks and the volume of the cubic meter.
Different countries may have different standard brick sizes.
The weight of 1 cubic meter of steel varies depending on the type and density of the steel.
The weight of steel can range from 7,750 to 8,050 kilograms per cubic meter.
Different types of steel, such as carbon steel or stainless steel, have different densities.
To calculate the weight of steel, you need to know its density and volume.
For example, if the density of steel is 7,850 kilograms per cubic meter, then 1 cubi...
An aqueduct is a structure designed to transport water from one location to another.
Aqueducts are typically built to carry water over long distances, often spanning valleys or rivers.
They can be constructed using various materials such as stone, concrete, or metal.
Aqueducts can be open channels or enclosed tunnels, depending on the terrain and requirements.
They have been used since ancient times, with notable exam...
The weight of 1 cubic meter of aggregate varies depending on the type of aggregate.
The weight of aggregate can range from 1,200 to 2,800 kilograms per cubic meter.
The weight is influenced by factors such as the density, moisture content, and grading of the aggregate.
For example, a cubic meter of crushed stone typically weighs around 1,500 kilograms, while a cubic meter of sand can weigh between 1,300 and 1,700 kil...
The weight of a steel bar can be calculated using a formula based on its dimensions and density.
The formula to calculate the weight of a steel bar is: weight = volume × density
The volume of a steel bar can be calculated using the formula: volume = length × area
The area of a steel bar can be calculated using the formula: area = π × (diameter/2)^2
The density of steel is typically around 7850 kg/m^3
Make sure to use c...
The joint time for a 110 mm coupler in electrofusion is the time required for the fusion process to complete.
The joint time depends on various factors such as pipe material, ambient temperature, and fusion machine settings.
It typically takes around 10-15 minutes for the electrofusion process to complete for a 110 mm coupler.
The fusion machine applies heat and pressure to melt the pipe and coupler surfaces together...
The time required for a 90mm dia coupler joint in electrofusion.
The time for a 90mm dia coupler joint in electrofusion depends on various factors such as the type of material being joined, the skill of the operator, and the specific electrofusion machine being used.
Generally, the joint time for a 90mm dia coupler in electrofusion can range from a few minutes to around 15 minutes.
The electrofusion process involves ...
The standard size of a brick in India is 19 cm x 9 cm x 9 cm.
The length of a standard brick in India is 19 cm.
The width of a standard brick in India is 9 cm.
The height of a standard brick in India is also 9 cm.
These dimensions are commonly used in construction projects in India.
Structures in a canal project include dams, weirs, spillways, locks, and bridges.
Dams are built across the canal to store water and create a reservoir.
Weirs are small dams used to control the flow of water in the canal.
Spillways are structures that allow excess water to flow out of the canal during heavy rainfall or floods.
Locks are used to raise or lower boats between different water levels in the canal.
Bridges a...
The slump cone test measures the workability and consistency of fresh concrete.
The slump cone is a truncated cone shape, typically 12 inches high.
It is filled with concrete in three layers, each compacted with a rod.
After filling, the cone is lifted vertically to allow the concrete to slump.
The vertical distance the concrete slumps is measured in inches.
A higher slump indicates more workability, while a lower slum...
Saisanket Industries Interview Experiences
5 interviews found
Anonymous
Selected
I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.
(3 Questions)
- Q1. As per her urgency
- Q2. Experience related
- Q3. Technical round
Interview Preparation Tips
I applied via Referral and was interviewed in Jan 2023. There were 3 interview rounds.
Pollution control & effect in our life.
(3 Questions)
- Q1. 1. Plc and scada related questions?
- Ans. 1. PLC means programmable logic controller and SCADA means supervisory controle and data acquisition.
- Q2. 2.Power system and electrical machine related topic?
- Q3. 2.About power fector, transformer, motor efficiency and starter.
Interview Preparation Tips
SUNIL KEWDA
Selected
I applied via Approached by Company and was interviewed before Feb 2023. There were 3 interview rounds.
(4 Questions)
- Q1. Steel bar weight formula ?
- Ans.
The weight of a steel bar can be calculated using a formula based on its dimensions and density.
The formula to calculate the weight of a steel bar is: weight = volume × density
The volume of a steel bar can be calculated using the formula: volume = length × area
The area of a steel bar can be calculated using the formula: area = π × (diameter/2)^2
The density of steel is typically around 7850 kg/m^3
Make sure to use consis...
- Q2. 1 cubic metre steel weight ?
- Ans.
The weight of 1 cubic meter of steel varies depending on the type and density of the steel.
The weight of steel can range from 7,750 to 8,050 kilograms per cubic meter.
Different types of steel, such as carbon steel or stainless steel, have different densities.
To calculate the weight of steel, you need to know its density and volume.
For example, if the density of steel is 7,850 kilograms per cubic meter, then 1 cubic met...
- Q3. 1 cubic metre aggregate weigh?
- Ans.
The weight of 1 cubic meter of aggregate varies depending on the type of aggregate.
The weight of aggregate can range from 1,200 to 2,800 kilograms per cubic meter.
The weight is influenced by factors such as the density, moisture content, and grading of the aggregate.
For example, a cubic meter of crushed stone typically weighs around 1,500 kilograms, while a cubic meter of sand can weigh between 1,300 and 1,700 kilogram...
- Q4. Slope of staircase
- Ans.
The slope of a staircase refers to the angle at which the stairs ascend or descend.
The slope of a staircase is typically measured in terms of the rise and run.
The rise is the vertical distance between two consecutive steps, while the run is the horizontal distance.
The slope can be calculated using the formula: slope = rise / run.
Building codes often specify maximum and minimum slope requirements for safety and accessib...
(16 Questions)
- Q1. What are the structures in a canal project?
- Ans.
Structures in a canal project include dams, weirs, spillways, locks, and bridges.
Dams are built across the canal to store water and create a reservoir.
Weirs are small dams used to control the flow of water in the canal.
Spillways are structures that allow excess water to flow out of the canal during heavy rainfall or floods.
Locks are used to raise or lower boats between different water levels in the canal.
Bridges are co...
- Q2. What is aqueduct
- Ans.
An aqueduct is a structure designed to transport water from one location to another.
Aqueducts are typically built to carry water over long distances, often spanning valleys or rivers.
They can be constructed using various materials such as stone, concrete, or metal.
Aqueducts can be open channels or enclosed tunnels, depending on the terrain and requirements.
They have been used since ancient times, with notable examples ...
- Q3. Standard size of brick in india in cm
- Ans.
The standard size of a brick in India is 19 cm x 9 cm x 9 cm.
The length of a standard brick in India is 19 cm.
The width of a standard brick in India is 9 cm.
The height of a standard brick in India is also 9 cm.
These dimensions are commonly used in construction projects in India.
- Q4. Total bricks in 1 cubic meter
- Ans.
The number of bricks in 1 cubic meter varies depending on the size of the bricks.
The size of the bricks affects the number of bricks in 1 cubic meter.
Standard brick sizes are commonly used in construction.
Calculating the number of bricks requires knowing the dimensions of the bricks and the volume of the cubic meter.
Different countries may have different standard brick sizes.
- Q5. M20 grade of concrete
- Ans.
M20 grade of concrete is a commonly used grade for construction purposes.
M20 grade of concrete has a compressive strength of 20 megapascals (MPa) after 28 days of curing.
It is commonly used for residential and commercial construction projects.
The mix proportion for M20 grade concrete is 1:1.5:3, which means 1 part cement, 1.5 parts fine aggregate (sand), and 3 parts coarse aggregate (stone chips or gravel).
M20 grade co...
- Q6. HDPE pipe weld types
- Ans.
HDPE pipe weld types include butt fusion, socket fusion, and electrofusion.
Butt fusion involves heating the ends of two pipes and then joining them together.
Socket fusion uses a heated socket to melt the pipe ends and fuse them together.
Electrofusion involves using specialized fittings with embedded heating elements to join pipes.
Other types of welds include saddle fusion, sidewall fusion, and hot gas fusion.
- Q7. 110 mm coupler joint time in electrofusion
- Ans.
The joint time for a 110 mm coupler in electrofusion is the time required for the fusion process to complete.
The joint time depends on various factors such as pipe material, ambient temperature, and fusion machine settings.
It typically takes around 10-15 minutes for the electrofusion process to complete for a 110 mm coupler.
The fusion machine applies heat and pressure to melt the pipe and coupler surfaces together, cre...
- Q8. 90mm dia coupler joint time in electrofusion
- Ans.
The time required for a 90mm dia coupler joint in electrofusion.
The time for a 90mm dia coupler joint in electrofusion depends on various factors such as the type of material being joined, the skill of the operator, and the specific electrofusion machine being used.
Generally, the joint time for a 90mm dia coupler in electrofusion can range from a few minutes to around 15 minutes.
The electrofusion process involves heati...
- Q9. Slope of staircase
- Ans.
The slope of a staircase refers to the angle at which the stairs ascend or descend.
The slope of a staircase is typically measured in terms of the rise and run.
The rise is the vertical distance between two consecutive steps.
The run is the horizontal distance between two consecutive steps.
The slope can be calculated using the formula: slope = rise / run.
Building codes often specify maximum and minimum slope requirements ...
- Q10. Slump cone is filled in
- Ans.
The slump cone test measures the workability and consistency of fresh concrete.
The slump cone is a truncated cone shape, typically 12 inches high.
It is filled with concrete in three layers, each compacted with a rod.
After filling, the cone is lifted vertically to allow the concrete to slump.
The vertical distance the concrete slumps is measured in inches.
A higher slump indicates more workability, while a lower slump ind...
- Q11. Raft foundation concert cover in bottom
- Ans.
The concrete cover in the bottom of a raft foundation is the protective layer of concrete that surrounds the reinforcement bars.
The concrete cover is necessary to protect the reinforcement bars from corrosion and provide fire resistance.
The thickness of the concrete cover depends on various factors such as the type of structure, exposure conditions, and design requirements.
For example, in a typical residential building...
- Q12. Column concrete cover
- Q13. Beam concrete cover
- Q14. Slab concrete cover
- Q15. Staircase concrete cover
- Q16. Footing concrete cover
(3 Questions)
- Q1. Total experience
- Q2. Your current project
- Q3. Your current location
Interview Preparation Tips
I applied via Referral and was interviewed in Mar 2022. There were 3 interview rounds.
Global warming can control both idea one is planting trees and controling polution.
(1 Question)
- Q1. PLC, SCADA ,Instrumentation and lader logics.
Interview Preparation Tips
Interview Questionnaire
3 Questions
- Q1. Instrumet gland termination
- Q2. Cabeling
- Q3. Personal information
Top trending discussions
Interview questions from similar companies
I applied via Company Website and was interviewed in Jan 2021. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. After 5 year in which position you will be
- Ans.
In five years, I envision myself as a senior analyst, leading projects and mentoring junior team members while driving impactful data-driven decisions.
I aim to develop expertise in advanced analytics tools, such as Python and R, to enhance data modeling capabilities.
I plan to take on leadership roles in projects, guiding teams to deliver actionable insights that align with business goals.
I aspire to mentor junior analy...
Interview Preparation Tips
You have basic knowledge of your qualifications
Interview Questionnaire
1 Question
- Q1. In 5 programs without effecting one by one how can you debug a particular program and how can you know tha program is calling in debug
- Ans.
To debug a particular program without affecting others, use breakpoints and step through the code.
Set a breakpoint in the program you want to debug
Step through the code using a debugger to identify the issue
Use logging statements to track the flow of the program
Check the call stack to see which functions are being called
Use conditional breakpoints to stop the program at specific points
Skills evaluated in this interview
I applied via Walk-in and was interviewed before Jun 2021. There were 2 interview rounds.
HR told about the company on the first day, how it works, told the rules, showed the management and a lot
Interview Preparation Tips
- Safery
- Environment
- Cleaning
I applied via Approached by Company and was interviewed before Jul 2021. There were 3 interview rounds.
(1 Question)
- Q1. It would be a short listing process to check if you fit the role
(1 Question)
- Q1. Questions would be based on the LP’s
(1 Question)
- Q1. Leadership principles
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Feb 2020. There were 4 interview rounds.
Interview Questionnaire
5 Questions
- Q1. What are the differences between C and C++?
- Q2. Explain the scenarios where If and Switch Case statements are used.
- Ans.
If and Switch Case statements are used for conditional branching in programming.
If statements are used for simple conditional branching.
Switch Case statements are used for multiple conditional branching.
If statements are more flexible than Switch Case statements.
Switch Case statements are more efficient than If statements for large number of conditions.
If statements can be nested, but Switch Case statements cannot.
Exam...
- Q3. Do you think algorithms and pseudocodes still play a role in the world of IT Services?
- Ans.
Yes, algorithms and pseudocodes are still important in IT Services.
Algorithms are used in various fields of IT such as machine learning, data analysis, and cryptography.
Pseudocodes are used to plan and design algorithms before coding them.
Understanding algorithms and pseudocodes is essential for software engineers to write efficient and optimized code.
Examples of algorithms include sorting algorithms, search algorithms...
- Q4. Are you comfortable using Command Line Interfaces (CLIs) or Integrated Development Environments (IDEs) as part of your daily tasks?
- Ans.
Yes, I am comfortable using both CLIs and IDEs for my daily tasks.
I have experience using various CLIs such as Git Bash, Windows Command Prompt, and Terminal on macOS.
I am proficient in using IDEs such as Visual Studio Code, Eclipse, and IntelliJ IDEA.
I understand the benefits and drawbacks of both CLIs and IDEs and can choose the appropriate tool for the task at hand.
- Q5. Are you okay to learn front end and back end technologies to ensure you are a complete developer in the longer run? Would you be able to learn the concepts if a timeline is given?? If yes, explain your lea...
Interview Preparation Tips
Skills evaluated in this interview
Saisanket Industries Interview FAQs
Tell us how to improve this page.
Saisanket Industries Interviews By Designations
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 2 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Saisanket Industries Reviews and Ratings
based on 51 reviews
Rating in categories
|
Project Engineer
15
salaries
|  ₹2 L/yr - ₹4.8 L/yr |
|
Automation Engineer
11
salaries
| ₹2.2 L/yr - ₹3.5 L/yr |
|
Assistant Manager
7
salaries
| ₹5 L/yr - ₹10 L/yr |
|
Project Manager
7
salaries
| ₹7.7 L/yr - ₹12.5 L/yr |
|
Mechanical Engineer
6
salaries
| ₹1.2 L/yr - ₹3 L/yr |
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- Saisanket Industries Interview Questions
