AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Sadhu Forging Interview Questions and Answers
Sadhu Forging Interview Experiences
12 interviews found
Anonymous
Selected
I applied via Recruitment Consulltant and was interviewed before Jan 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Can you provide a self-introduction?
- Q2. What basic information can you provide about your previous company?
- Ans.
My previous company was a leading electrical engineering firm specializing in power distribution systems.
Specialized in designing and implementing power distribution systems
Worked on projects for commercial and industrial clients
Collaborated with other engineering disciplines for integrated solutions
(7 Questions)
- Q1. Can you provide a self-introduction?
- Q2. What is the history of the machinery used in your previous company?
- Ans.
The machinery used in my previous company ranged from traditional electrical equipment to advanced automation systems.
The machinery included transformers, generators, motors, and control panels for power distribution.
We also utilized PLCs, SCADA systems, and robotics for automation and control processes.
Regular maintenance and upgrades were conducted to ensure optimal performance and efficiency.
Collaboration with vendo...
- Q3. CNC machine alarm and SPM MC and PLC related alarm
- Q4. What are the common alarms associated with Variable Frequency Drives (VFD)?
- Ans.
Common alarms associated with Variable Frequency Drives (VFD) include overvoltage, undervoltage, overcurrent, overtemperature, and ground fault.
Overvoltage alarm: occurs when the voltage supplied to the VFD exceeds the specified limit.
Undervoltage alarm: triggered when the voltage supplied to the VFD falls below the specified limit.
Overcurrent alarm: indicates that the current drawn by the VFD exceeds the rated value.
O...
- Q5. What are the common alarms encountered with CNC machines?
- Ans.
Common alarms encountered with CNC machines include overtravel alarms, spindle alarms, and tool change alarms.
Overtravel alarms occur when the machine reaches its physical limits and tries to move further
Spindle alarms can be triggered by issues such as overheating or excessive vibration
Tool change alarms may indicate problems with the tool holder or tool changer mechanism
- Q6. What are the common alarms associated with a Vertical Machining Center (VMC)?
- Ans.
Common alarms associated with a VMC include tool wear, tool breakage, spindle overload, and coolant level.
Tool wear alarm indicates the need to replace the cutting tool due to wear and tear.
Tool breakage alarm alerts when a cutting tool breaks during machining.
Spindle overload alarm warns of excessive load on the spindle, which can lead to damage.
Coolant level alarm signals when the coolant level in the machine is low,
- Q7. What is the basic information regarding Diesel Generator (DG) sets?
- Ans.
Diesel Generator (DG) sets are backup power sources commonly used in industries and commercial buildings.
DG sets consist of a diesel engine and an electric generator to produce electricity.
They are used as backup power sources in case of grid power failure.
DG sets are commonly used in industries, hospitals, data centers, and commercial buildings.
They require regular maintenance and fuel supply to ensure proper function...
Interview Preparation Tips
- CNC Machines
- VMC Machine
- spm m
Electrical Engineer Interview Questions asked at other Companies
(5 Questions)
- Q1. SPC,MSA, APQP, FMEA, PPAP, 8D,CAPA,
- Q2. Process audit, Product audit, Layout audit,
- Q3. Kaizen,Cp, cpk,
- Q4. Quality control, quality assurance
- Q5. GD&T,7QC tools,
Interview Preparation Tips
Senior Engineer Mechanical Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed in Jul 2024. There were 3 interview rounds.
(2 Questions)
- Q1. Process & process audit
- Q2. Product audit
(1 Question)
- Q1. Iatf related, iso
(1 Question)
- Q1. Normal interview, culture, from house
Senior Executive Interview Questions asked at other Companies
I appeared for an interview in Jul 2024.
(2 Questions)
- Q1. M code G code
- Q2. Offset normal inter view
Interview Preparation Tips
VMC Operator Interview Questions asked at other Companies
Sadhu Forging interview questions for popular designations
(6 Questions)
- Q1. Grading system of steel
- Ans.
Steel grading system categorizes steel based on its chemical composition, physical properties, and intended use.
Steel grades are typically classified by a numbering system such as AISI, ASTM, or SAE.
Grades indicate the carbon content, strength, and other alloying elements present in the steel.
Examples include AISI 304 stainless steel, ASTM A36 structural steel, and SAE 4140 alloy steel.
- Q2. Heat treatment process
- Q3. Structure after forging
- Ans.
The structure after forging is typically more refined and denser compared to the original material.
Forging process rearranges the internal grain structure of the material
Grain boundaries become more uniform and aligned
Increases in strength and toughness can be observed
Reduction in porosity and defects
Examples: Steel forged into a crankshaft, aluminum forged into aircraft components
- Q4. Induction hardening process
- Q5. 9 point sample location in carburizing furnace
- Ans.
Sample locations in a carburizing furnace are crucial for accurate analysis of the process.
Sample locations should be evenly distributed throughout the furnace to ensure representative results.
Consider placing samples at different heights and distances from the heat source to account for temperature variations.
Samples should be placed in areas where carburization is expected to be most effective, such as near the carbo...
- Q6. Effect of fine pearlite and getrite
- Ans.
Fine pearlite and getrite have different effects on the properties of steel.
Fine pearlite increases strength and hardness of steel due to its fine structure.
Getrite improves toughness and ductility of steel by reducing the amount of pearlite present.
Fine pearlite is formed by rapid cooling, while getrite is formed by slow cooling.
The combination of fine pearlite and getrite can result in a balanced mix of strength, tou...
Metallurgical Engineer Interview Questions asked at other Companies
(1 Question)
- Q1. How to control lead variation in Gear
- Ans.
Lead variation in gears can be controlled by ensuring proper manufacturing processes and quality control measures.
Use high precision machining techniques to ensure accurate dimensions of gears
Implement strict quality control measures during production to detect and correct any variations
Regularly calibrate and maintain production equipment to ensure consistency in gear manufacturing
Utilize advanced technology such as C...
Production Engineer Interview Questions asked at other Companies
Selected
I applied via Recruitment Consulltant and was interviewed before Mar 2023. There was 1 interview round.
(2 Questions)
- Q1. Last Working period
- Q2. Last Salary paid with past company
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Mar 2022. There were 3 interview rounds.
Ask me questions
Interview Preparation Tips
- English Typing
- Metallurgy
Piyush Gupta
Interview Questionnaire
1 Question
- Q1. What's role of ppc department in industries?
- Ans.
PPC department plays a crucial role in driving targeted traffic and generating revenue for industries through paid advertising.
PPC department manages and optimizes paid advertising campaigns on various platforms like Google Ads, Facebook Ads, etc.
They conduct keyword research, create ad copies, and set bids to ensure maximum ROI.
PPC department also tracks and analyzes campaign performance to make data-driven decisions ...
Interview Preparation Tips
PPC Engineer Interview Questions asked at other Companies
(1 Question)
- Q1. Tell me about yourself.
Interview Preparation Tips
Best
Trainee Interview Questions asked at other Companies
Brijesh Singh
Selected
I applied via Recruitment Consulltant and was interviewed before Feb 2022. There were 3 interview rounds.
What is your experience answer 16 years experience
(2 Questions)
- Q1. What is your name ☺️ answer Brijesh Singh
- Q2. Finally salary decision
Interview Preparation Tips
- No topic
QA QC Inspector Interview Questions asked at other Companies
Top trending discussions
Sadhu Forging Interview FAQs
Some of the top questions asked at the Sadhu Forging interview -
Tell us how to improve this page.
Sadhu Forging Interviews By Designations
- Sadhu Forging Senior Engineer Mechanical Interview Questions
- Sadhu Forging VMC Operator Interview Questions
- Sadhu Forging Electrical Engineer Interview Questions
- Sadhu Forging Quality Engineer Interview Questions
- Sadhu Forging Metallurgical Engineer Interview Questions
- Sadhu Forging Production Engineer Interview Questions
- Sadhu Forging PPC Engineer Interview Questions
- Sadhu Forging QA QC Inspector Interview Questions
- Show more
Interview Questions for Popular Designations
Sadhu Forging Interview Process
based on 18 interviews
Interview experience
Interview Questions from Similar Companies
Sadhu Forging Reviews and Ratings
based on 149 reviews
Rating in categories
|
Quality Engineer
59
salaries
|  ₹1.6 L/yr - ₹4.5 L/yr |
|
Senior Engineer
29
salaries
| ₹3 L/yr - ₹6 L/yr |
|
Production Engineer
20
salaries
| ₹2.2 L/yr - ₹4.1 L/yr |
|
Quality Inspector
20
salaries
| ₹1.3 L/yr - ₹3 L/yr |
|
Design Engineer
19
salaries
| ₹2.1 L/yr - ₹5.2 L/yr |
Gilbarco Veeder Root
Kirloskar Toyota Textile Machinery
HYT Engineering
L&T–MHI Power Boilers
- Home >
- Interviews >
- Sadhu Forging Interview Questions
