Upload Button Icon Add office photos

Rungta Mines

Compare button icon Compare button icon Compare

Filter interviews by

Rungta Mines Deputy Manager Interview Questions and Answers

Updated 1 May 2024

Rungta Mines Deputy Manager Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Rope dia calculation for given capacity of overhead crane.
  • Ans. 

    Calculate rope diameter based on overhead crane capacity

    • Calculate the weight of the load the crane will be lifting

    • Determine the maximum load capacity of the crane

    • Use the formula: Rope diameter = (Load weight / (2 * Safe working load * Safety factor * π))^0.5

    • For example, if the load weight is 10 tons, safe working load is 5 tons, and safety factor is 2, the rope diameter would be calculated as: (10000 / (2 * 5 * 2 * 3.1

  • Answered by AI
  • Q2. Centrifugal pump efficiency curves
  • Ans. 

    Centrifugal pump efficiency curves show the relationship between flow rate and efficiency of the pump.

    • Efficiency curves help in selecting the right pump for a specific application

    • They provide information on the pump's performance at different operating points

    • Efficiency curves typically have a peak efficiency point and a best efficiency point (BEP)

    • Understanding these curves can help in optimizing pump performance and en

  • Answered by AI
  • Q3. Cost of solenoid valve and servo.
  • Ans. 

    The cost of solenoid valves and servos can vary depending on the brand, size, and quality.

    • Cost of solenoid valves can range from $10 to $1000+ depending on size and brand.

    • Servos can cost anywhere from $20 to $500+ depending on torque and brand.

    • Higher quality solenoid valves and servos may have a higher price tag.

    • Consider factors like durability, performance, and warranty when comparing costs.

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Compensating salary by giving 2 jump on post
  • Ans. But I didn't accepted their condition and said NO for job. Finally they agreed and at present I am working here.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - You should exhibit/emphasize on your management skill if it is for manager/deputy mgr post, technical if post is technical.

If it is for head position, here it is sr. Mgr then you should emphasize on totality.

Interview Questionnaire 

3 Questions

  • Q1. Transformers, HT,LT switchgear, Overhauling of motors, communication protocol,LA,CT,PT,Relay, Protection.
  • Q2. Erection, commissioning and maintenance.
  • Q3. Equipment rating,fault tracing and maintenance and spare management.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please go through the job description.

Deputy Manager Interview Questions Asked at Other Companies

asked in HDFC Bank
Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with u ... read more
Q2. How would you sale our products to your existing clients?
asked in ICICI Bank
Q3. What are the important ratios you will check to sanction a loan t ... read more
Q4. What we do for shortage of material received?
Q5. What was your major master areas?

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Details about project
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jun 2024. There were 5 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. For Profile test
  • Q2. Role and Responsibility test
Round 2 - Technical 

(2 Questions)

  • Q1. My self introduction
  • Q2. Technical Round
Round 3 - Group Discussion 

Share group profile and Up coming projects.

Round 4 - Assignment 

1400MW Bikaner Rajasthan project commissioning targets Nov. 2025.

Round 5 - HR 

(2 Questions)

  • Q1. Salary Discussion
  • Q2. Final Negotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Culture and Company profile.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 4 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About current company
  • Q2. About the company and there products
Round 2 - HR 

(3 Questions)

  • Q1. Regarding personal information
  • Q2. Why you want to switch your Job..??
  • Q3. Reason to relocate..??
Round 3 - One-on-one 

(2 Questions)

  • Q1. What are the safety norms and company acts..?
  • Ans. 

    Safety norms and company acts are regulations and guidelines put in place to ensure the safety and well-being of employees in the workplace.

    • Safety norms include wearing personal protective equipment (PPE) such as helmets, gloves, and safety shoes.

    • Company acts may include regular safety training sessions for employees to educate them on potential hazards and how to prevent accidents.

    • Safety norms also cover emergency pro...

  • Answered by AI
  • Q2. Standards and Lean manufacturing
Round 4 - Technical 

(1 Question)

  • Q1. Interview with VP
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Apr 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Questions about Productivity of Excavators 1. What is the optimum output and what the factors affecting it? 2. How can we increase the Productivity? 3. What can be the highest possible output?
  • Q2. What Exemption can be taken from Statutory bodies in an Opencast Mine?
  • Ans. 

    Exemptions from statutory bodies in an opencast mine include environmental clearances, land acquisition permissions, and mining lease approvals.

    • Environmental clearances are required from bodies like the Ministry of Environment, Forest and Climate Change.

    • Land acquisition permissions may be needed from local government bodies or landowners.

    • Mining lease approvals are typically obtained from the relevant state government d...

  • Answered by AI
  • Q3. What precautions do you take as Shift incharge during blasting?
  • Ans. 

    I ensure proper safety measures are in place, including securing the area, using appropriate equipment, and following all regulations.

    • Securing the blasting area to prevent unauthorized access

    • Using appropriate personal protective equipment (PPE) such as helmets, goggles, and ear protection

    • Following all safety regulations and guidelines set by the company and relevant authorities

    • Conducting regular safety inspections and ...

  • Answered by AI
  • Q4. What is your responsibility with MDO?
Round 3 - Technical 

(1 Question)

  • Q1. Just about my Service Experience and Job role so far in different organisations
Round 4 - Discussion with Executive 

(1 Question)

  • Q1. What is your current job assignment? What do you do to justify it?
Round 1 - Technical 

(1 Question)

  • Q1. Quation related siemens plc automation and dc/ ac motors/drives

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on technical questions and the dc motor maintenance,scheduling the pm
Interview experience
4
Good
Difficulty level
Hard
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain GTG Operation and load sharing
  • Ans. 

    GTG operation involves multiple generators working together to share the load and ensure continuous power supply.

    • GTG stands for Gas Turbine Generator

    • In GTG operation, multiple generators are synchronized to work together

    • Load sharing ensures that the power demand is distributed evenly among the generators

    • This helps in maintaining a stable power supply and prevents overloading of any single generator

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Details of power station design
  • Ans. 

    Power station design involves the planning and construction of facilities that generate electricity.

    • Design includes selection of appropriate technology and equipment

    • Consideration of environmental impact and safety measures

    • Layout and construction of buildings and infrastructure

    • Integration with power grid and transmission systems

    • Examples include thermal power plants, hydroelectric power plants, and wind farms

  • Answered by AI
  • Q2. Efficiency of Power station
  • Ans. 

    Efficiency of a power station is the ratio of output power to input power.

    • Efficiency can be improved by using advanced technologies and equipment.

    • Regular maintenance and cleaning of equipment can also improve efficiency.

    • Efficiency can be affected by factors such as fuel quality, weather conditions, and demand for electricity.

    • For example, a power station using combined cycle technology can achieve an efficiency of up to...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Stick to the basiscs and don't show overconfidence. Details overall knowledge must have to crack the interview
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I appeared for an interview in Jun 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic aptitude test related to number system.

Round 3 - Technical 

(1 Question)

  • Q1. Technical round was related to engineering branch.

Rungta Mines Interview FAQs

How many rounds are there in Rungta Mines Deputy Manager interview?
Rungta Mines interview process usually has 3 rounds. The most common rounds in the Rungta Mines interview process are Technical, HR and Resume Shortlist.
How to prepare for Rungta Mines Deputy Manager interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Rungta Mines. The most common topics and skills that interviewers at Rungta Mines expect are Steel Making.
What are the top questions asked in Rungta Mines Deputy Manager interview?

Some of the top questions asked at the Rungta Mines Deputy Manager interview -

  1. Rope dia calculation for given capacity of overhead cra...read more
  2. Cost of solenoid valve and ser...read more
  3. centrifugal pump efficiency cur...read more

Tell us how to improve this page.

Rungta Mines Deputy Manager Interview Process

based on 7 interviews

Interview experience

4.4
  
Good
View more
Rungta Mines Deputy Manager Salary
based on 208 salaries
₹5.7 L/yr - ₹14 L/yr
7% more than the average Deputy Manager Salary in India
View more details

Rungta Mines Deputy Manager Reviews and Ratings

based on 42 reviews

3.9/5

Rating in categories

3.2

Skill development

3.5

Work-life balance

3.6

Salary

3.6

Job security

3.0

Company culture

3.5

Promotions

3.4

Work satisfaction

Explore 42 Reviews and Ratings
Junior Manager
347 salaries
unlock blur

₹3 L/yr - ₹9 L/yr

Assistant Manager
343 salaries
unlock blur

₹3.6 L/yr - ₹12 L/yr

Deputy Manager
208 salaries
unlock blur

₹5.7 L/yr - ₹14 L/yr

Manager
121 salaries
unlock blur

₹6.5 L/yr - ₹18 L/yr

Senior Manager
95 salaries
unlock blur

₹9.5 L/yr - ₹22.3 L/yr

Explore more salaries
Compare Rungta Mines with

Hindalco Industries

4.2
Compare

Hindustan Zinc

3.8
Compare

Vedanta Resources

3.7
Compare

Carborundum Universal Limited

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview