Filter interviews by
I applied via Apna Jobs and was interviewed in Apr 2022. There was 1 interview round.
Pipeline use of material involves selecting appropriate materials for construction and maintenance.
Materials used in pipelines must be strong, durable, and resistant to corrosion.
Common materials used include steel, cast iron, plastic, and concrete.
Selection of materials depends on factors like the type of fluid being transported, pressure, temperature, and environmental conditions.
For example, steel pipes are commonly...
To fix a leakage block in a pipeline, identify the location of the leak, shut off the flow, clean and dry the area, apply a suitable sealant or patch, and test for any further leaks.
Identify the location of the leakage block in the pipeline.
Shut off the flow of the pipeline to prevent further leakage.
Clean and dry the area around the leakage block.
Apply a suitable sealant or patch to fix the leak.
Test the repaired area
Water in a pipeline can be controlled through various methods such as valves, pressure regulators, and flow meters.
Valves can be used to open or close the pipeline to control the flow of water.
Pressure regulators can be installed to maintain a specific pressure level in the pipeline.
Flow meters can be used to measure the amount of water flowing through the pipeline.
By using a combination of these methods, water flow an...
Ms welding rod is a type of welding electrode that is commonly used for welding mild steel.
Ms welding rod is also known as mild steel welding rod.
It is used for joining mild steel components together.
The rod is made of mild steel and coated with flux to protect the weld from contamination.
It is suitable for both AC and DC welding.
Examples of Ms welding rod brands include Lincoln Electric Fleetweld 37 and Hobart H-10.
To manage oil leakage, it is important to identify the source, contain the spill, and clean up the affected area.
Identify the source of the oil leakage and stop it if possible.
Contain the spill using absorbent materials like booms, socks, or absorbent pads.
Prevent the oil from spreading further by creating barriers or using containment booms.
Clean up the affected area using appropriate cleaning agents and equipment.
Dis...
To clean a pipeline, you can use various methods such as flushing, pigging, or chemical cleaning.
Flushing the pipeline with water or a cleaning solution can remove debris and buildup.
Pigging involves using a device called a pig to scrape the inside of the pipeline and remove contaminants.
Chemical cleaning involves using specialized chemicals to dissolve or dislodge deposits in the pipeline.
Regular maintenance and inspe...
Pipeline management involves coordinating and optimizing the flow of tasks and resources to ensure efficient and timely completion.
Identify and prioritize tasks
Allocate resources effectively
Monitor progress and adjust as needed
Communicate and collaborate with team members
Use tools and technology to streamline processes
Example: In software development, pipeline management involves planning, coding, testing, and deployin
The type of spanner used in pipeline work is called a pipe wrench.
Pipe wrenches are adjustable wrenches used for gripping and turning pipes and fittings.
They have serrated jaws that provide a strong grip on the pipe.
Pipe wrenches come in different sizes to accommodate various pipe diameters.
They are commonly used in plumbing, construction, and maintenance work.
Examples of pipe wrench brands include Ridgid, Craftsman, a
Top trending discussions
I applied via AmbitionBox and was interviewed in Apr 2024. There were 2 interview rounds.
Case study safety case study safety
To drill a 4 mm hole, use a 4 mm drill bit.
Use a drill bit that matches the size of the hole you want to create.
In this case, a 4 mm drill bit should be used to drill a 4 mm hole.
Using a smaller or larger drill bit will result in a hole size different from 4 mm.
I applied via Indeed and was interviewed in Mar 2022. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Oct 2024. There were 2 interview rounds.
Complete details after completing class
posted on 15 Mar 2024
I applied via Company Website and was interviewed in Feb 2024. There was 1 interview round.
I applied via Naukri.com and was interviewed in Oct 2023. There was 1 interview round.
posted on 19 Jun 2023
I applied via Company Website and was interviewed in Sep 2023. There were 3 interview rounds.
Fitter technician apprentice at iocl panipat
Casting Engineer
4
salaries
| ₹3.2 L/yr - ₹4 L/yr |
Software Intern
4
salaries
| ₹5 L/yr - ₹18 L/yr |
EOT Crane Operator
4
salaries
| ₹1.8 L/yr - ₹2.2 L/yr |
Accounts & Office Assistant
4
salaries
| ₹1.3 L/yr - ₹1.4 L/yr |
Engineer
4
salaries
| ₹2 L/yr - ₹5.2 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel