Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Rostfrei Steels Team. If you also belong to the team, you can get access from here

Rostfrei Steels Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Rostfrei Steels Quality Engineer Interview Questions and Answers

Updated 26 Jul 2024

Rostfrei Steels Quality Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. 7Qc tool capa red bin analysis ppm
  • Q2. 5core tool spc fmea msa control plan

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2024.

Round 1 - One-on-one 

(6 Questions)

  • Q1. Have you prepared CAPA?
  • Ans. 

    Yes, I have prepared CAPA (Corrective and Preventive Action) reports in my previous roles.

    • Yes, I have prepared CAPA reports to address quality issues and prevent their recurrence.

    • I have experience in conducting root cause analysis to identify the underlying issues.

    • I have implemented corrective actions to address immediate concerns and preventive actions to avoid future issues.

    • I have also monitored the effectiveness of

  • Answered by AI
  • Q2. What is APQP and their application
  • Ans. 

    APQP stands for Advanced Product Quality Planning. It is a structured method for defining and establishing the steps necessary to ensure that a product satisfies the customer.

    • APQP is a quality framework used in the automotive industry to ensure that products meet customer requirements.

    • It involves a series of phases including planning, product design and development, process design and development, product and process v...

  • Answered by AI
  • Q3. 7QC Tools and their application
  • Ans. 

    7QC Tools are a set of tools used for quality control and improvement in manufacturing processes.

    • Check Sheet: Used to collect and analyze data, such as defects in a product.

    • Histogram: Shows the frequency distribution of a set of data.

    • Pareto Chart: Helps identify the most significant factors contributing to a problem.

    • Cause and Effect Diagram (Fishbone Diagram): Used to identify and analyze potential causes of a problem.

    • ...

  • Answered by AI
  • Q4. What all are the PPAP Documents?
  • Ans. 

    PPAP documents include documents like control plan, FMEA, measurement system analysis, etc.

    • Control Plan

    • FMEA (Failure Mode and Effects Analysis)

    • Measurement System Analysis

    • Part Submission Warrant

    • Process Flow Diagram

    • Appearance Approval Report

  • Answered by AI
  • Q5. Acceptance criteria for SPC&MSA
  • Ans. 

    Acceptance criteria for SPC&MSA involves setting specific requirements for statistical process control and measurement system analysis.

    • Acceptance criteria for SPC should include specifications for control limits, process stability, and capability indices.

    • Acceptance criteria for MSA should include requirements for bias, linearity, stability, repeatability, and reproducibility.

    • Examples of acceptance criteria for SPC coul...

  • Answered by AI
  • Q6. How you're declaring the severity in PFMEA
  • Ans. 

    Severity in PFMEA is declared based on the potential impact of a failure mode on the overall process or product.

    • Severity is typically rated on a scale from 1 to 10, with 1 being the least severe and 10 being the most severe.

    • Consider the consequences of a failure mode on customer safety, regulatory compliance, product functionality, and overall process performance.

    • Examples of high severity failure modes include those th...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do well

I applied via Referral and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About yourself, working profile, family background, your confidence, where you gonna stay, how will you reach to the office etc
Round 3 - Technical 

(1 Question)

  • Q1. ABOUT YOUR RESUME AND GENERAL OF WELDING, DRAWING AND FABRICATIONS

Interview Preparation Tips

Topics to prepare for Diffusion Engineers Quality Engineer interview:
  • ACCORDING TO BRANCHES
Interview preparation tips for other job seekers - PREPARE YOURSELD AND THEN COME FOR INTERVIEW
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(8 Questions)

  • Q1. Will you have similar work experience as required by client.
  • Ans. 

    Yes, I have similar work experience as required by the client.

    • I have worked as a Quality Engineer for the past 5 years.

    • I have experience in conducting quality audits and inspections.

    • I have implemented quality control processes and procedures.

    • I have worked with cross-functional teams to identify and resolve quality issues.

    • I have experience in using quality tools and techniques such as Six Sigma and Lean methodologies.

    • I ...

  • Answered by AI
  • Q2. How will you confirm the proper vertical alingment of Tubewell pipe lowering.
  • Ans. 

    To confirm the proper vertical alignment of Tubewell pipe lowering, measurements and visual inspections can be conducted.

    • Measure the verticality of the pipe using a plumb bob or laser level.

    • Inspect the pipe for any visible signs of misalignment or tilting.

    • Compare the measurements and visual observations with the specified tolerances.

    • Ensure that the pipe is securely anchored to prevent any movement or deviation from the...

  • Answered by AI
  • Q3. What's are the components of a Single village scheme.
  • Ans. 

    A Single village scheme consists of various components aimed at improving the quality of life in a single village.

    • Infrastructure development

    • Access to clean water and sanitation facilities

    • Education and skill development

    • Healthcare facilities

    • Livelihood opportunities

    • Social welfare programs

    • Community empowerment

  • Answered by AI
  • Q4. What are the different types of pipes used in water supply project
  • Ans. 

    There are several types of pipes used in water supply projects, including PVC, HDPE, copper, galvanized steel, and PEX.

    • PVC pipes are commonly used due to their affordability, durability, and resistance to corrosion.

    • HDPE pipes are known for their flexibility, high strength, and resistance to chemicals.

    • Copper pipes are often used for indoor plumbing due to their excellent heat and corrosion resistance.

    • Galvanized steel pi...

  • Answered by AI
  • Q5. What will be your approach on project management staregy.
  • Ans. 

    My approach to project management strategy is to prioritize clear communication, establish realistic goals, and continuously monitor progress.

    • Prioritize clear and effective communication with all stakeholders

    • Establish realistic and achievable goals and milestones

    • Continuously monitor project progress and make necessary adjustments

    • Implement quality control measures to ensure adherence to standards

    • Regularly assess risks a...

  • Answered by AI
  • Q6. Do you work on project monitoring and inspection of water supply project.
  • Ans. 

    Yes, I have experience in project monitoring and inspection of water supply projects.

    • I have worked on multiple water supply projects where I was responsible for monitoring and inspecting the quality of the water supply.

    • I have conducted regular inspections to ensure compliance with quality standards and regulations.

    • I have implemented quality control measures to identify and address any issues or deficiencies in the wate...

  • Answered by AI
  • Q7. Do you know to prepare check list for every components of item to be execute as per RFP.
  • Ans. 

    Yes

    • Yes, I am familiar with preparing checklists for every component of an item to be executed as per the RFP.

    • I understand the importance of having a comprehensive checklist to ensure all requirements are met.

    • I have experience in creating checklists for quality control processes and inspections.

    • I am proficient in identifying critical components and their associated requirements.

    • I can prioritize checklist items based on ...

  • Answered by AI
  • Q8. Do you have any liazoning skills with government Client.
  • Ans. 

    Yes, I have experience with liaising with government clients.

    • I have successfully managed relationships with government clients in my previous role as a Quality Engineer.

    • I am familiar with the protocols and procedures involved in working with government clients.

    • I have effectively communicated and coordinated with government agencies to ensure compliance and quality standards.

    • I have experience in navigating the bureaucra...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Fichtner Consulting Engineers Quality Engineer interview:
  • Quality Assurance
  • Quality Management
  • Monthly Reports
  • Project Coordination
  • MS Project
  • Construction Management
Interview preparation tips for other job seekers - Believes in your self. Be focused on your technical skills. I have basic ruke of doing any work as Involved Intiative and Inform to senior.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2024.

Round 1 - One-on-one 

(6 Questions)

  • Q1. Have you prepared CAPA?
  • Ans. 

    Yes, I have prepared CAPA (Corrective and Preventive Action) reports in my previous roles.

    • Yes, I have prepared CAPA reports to address quality issues and prevent their recurrence.

    • I have experience in conducting root cause analysis to identify the underlying issues.

    • I have implemented corrective actions to address immediate concerns and preventive actions to avoid future issues.

    • I have also monitored the effectiveness of

  • Answered by AI
  • Q2. What is APQP and their application
  • Ans. 

    APQP stands for Advanced Product Quality Planning. It is a structured method for defining and establishing the steps necessary to ensure that a product satisfies the customer.

    • APQP is a quality framework used in the automotive industry to ensure that products meet customer requirements.

    • It involves a series of phases including planning, product design and development, process design and development, product and process v...

  • Answered by AI
  • Q3. 7QC Tools and their application
  • Ans. 

    7QC Tools are a set of tools used for quality control and improvement in manufacturing processes.

    • Check Sheet: Used to collect and analyze data, such as defects in a product.

    • Histogram: Shows the frequency distribution of a set of data.

    • Pareto Chart: Helps identify the most significant factors contributing to a problem.

    • Cause and Effect Diagram (Fishbone Diagram): Used to identify and analyze potential causes of a problem.

    • ...

  • Answered by AI
  • Q4. What all are the PPAP Documents?
  • Ans. 

    PPAP documents include documents like control plan, FMEA, measurement system analysis, etc.

    • Control Plan

    • FMEA (Failure Mode and Effects Analysis)

    • Measurement System Analysis

    • Part Submission Warrant

    • Process Flow Diagram

    • Appearance Approval Report

  • Answered by AI
  • Q5. Acceptance criteria for SPC&MSA
  • Ans. 

    Acceptance criteria for SPC&MSA involves setting specific requirements for statistical process control and measurement system analysis.

    • Acceptance criteria for SPC should include specifications for control limits, process stability, and capability indices.

    • Acceptance criteria for MSA should include requirements for bias, linearity, stability, repeatability, and reproducibility.

    • Examples of acceptance criteria for SPC coul...

  • Answered by AI
  • Q6. How you're declaring the severity in PFMEA
  • Ans. 

    Severity in PFMEA is declared based on the potential impact of a failure mode on the overall process or product.

    • Severity is typically rated on a scale from 1 to 10, with 1 being the least severe and 10 being the most severe.

    • Consider the consequences of a failure mode on customer safety, regulatory compliance, product functionality, and overall process performance.

    • Examples of high severity failure modes include those th...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do well
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. All tech question on previous exp.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Coding Test 

Water supply projects related with family question paper and send me.

Interview Preparation Tips

Interview preparation tips for other job seekers - Excellent work my scope and decision good quality work on site

I applied via Referral and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About yourself, working profile, family background, your confidence, where you gonna stay, how will you reach to the office etc
Round 3 - Technical 

(1 Question)

  • Q1. ABOUT YOUR RESUME AND GENERAL OF WELDING, DRAWING AND FABRICATIONS

Interview Preparation Tips

Topics to prepare for Diffusion Engineers Quality Engineer interview:
  • ACCORDING TO BRANCHES
Interview preparation tips for other job seekers - PREPARE YOURSELD AND THEN COME FOR INTERVIEW
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(8 Questions)

  • Q1. Will you have similar work experience as required by client.
  • Ans. 

    Yes, I have similar work experience as required by the client.

    • I have worked as a Quality Engineer for the past 5 years.

    • I have experience in conducting quality audits and inspections.

    • I have implemented quality control processes and procedures.

    • I have worked with cross-functional teams to identify and resolve quality issues.

    • I have experience in using quality tools and techniques such as Six Sigma and Lean methodologies.

    • I ...

  • Answered by AI
  • Q2. How will you confirm the proper vertical alingment of Tubewell pipe lowering.
  • Ans. 

    To confirm the proper vertical alignment of Tubewell pipe lowering, measurements and visual inspections can be conducted.

    • Measure the verticality of the pipe using a plumb bob or laser level.

    • Inspect the pipe for any visible signs of misalignment or tilting.

    • Compare the measurements and visual observations with the specified tolerances.

    • Ensure that the pipe is securely anchored to prevent any movement or deviation from the...

  • Answered by AI
  • Q3. What's are the components of a Single village scheme.
  • Ans. 

    A Single village scheme consists of various components aimed at improving the quality of life in a single village.

    • Infrastructure development

    • Access to clean water and sanitation facilities

    • Education and skill development

    • Healthcare facilities

    • Livelihood opportunities

    • Social welfare programs

    • Community empowerment

  • Answered by AI
  • Q4. What are the different types of pipes used in water supply project
  • Ans. 

    There are several types of pipes used in water supply projects, including PVC, HDPE, copper, galvanized steel, and PEX.

    • PVC pipes are commonly used due to their affordability, durability, and resistance to corrosion.

    • HDPE pipes are known for their flexibility, high strength, and resistance to chemicals.

    • Copper pipes are often used for indoor plumbing due to their excellent heat and corrosion resistance.

    • Galvanized steel pi...

  • Answered by AI
  • Q5. What will be your approach on project management staregy.
  • Ans. 

    My approach to project management strategy is to prioritize clear communication, establish realistic goals, and continuously monitor progress.

    • Prioritize clear and effective communication with all stakeholders

    • Establish realistic and achievable goals and milestones

    • Continuously monitor project progress and make necessary adjustments

    • Implement quality control measures to ensure adherence to standards

    • Regularly assess risks a...

  • Answered by AI
  • Q6. Do you work on project monitoring and inspection of water supply project.
  • Ans. 

    Yes, I have experience in project monitoring and inspection of water supply projects.

    • I have worked on multiple water supply projects where I was responsible for monitoring and inspecting the quality of the water supply.

    • I have conducted regular inspections to ensure compliance with quality standards and regulations.

    • I have implemented quality control measures to identify and address any issues or deficiencies in the wate...

  • Answered by AI
  • Q7. Do you know to prepare check list for every components of item to be execute as per RFP.
  • Ans. 

    Yes

    • Yes, I am familiar with preparing checklists for every component of an item to be executed as per the RFP.

    • I understand the importance of having a comprehensive checklist to ensure all requirements are met.

    • I have experience in creating checklists for quality control processes and inspections.

    • I am proficient in identifying critical components and their associated requirements.

    • I can prioritize checklist items based on ...

  • Answered by AI
  • Q8. Do you have any liazoning skills with government Client.
  • Ans. 

    Yes, I have experience with liaising with government clients.

    • I have successfully managed relationships with government clients in my previous role as a Quality Engineer.

    • I am familiar with the protocols and procedures involved in working with government clients.

    • I have effectively communicated and coordinated with government agencies to ensure compliance and quality standards.

    • I have experience in navigating the bureaucra...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Fichtner Consulting Engineers Quality Engineer interview:
  • Quality Assurance
  • Quality Management
  • Monthly Reports
  • Project Coordination
  • MS Project
  • Construction Management
Interview preparation tips for other job seekers - Believes in your self. Be focused on your technical skills. I have basic ruke of doing any work as Involved Intiative and Inform to senior.

I applied via Approached by Company and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Major NDT Updated technology in fab structures
  • Ans. 

    Digital Radiography and Ultrasonic Testing are major NDT updated technologies in fab structures.

    • Digital Radiography uses digital sensors to capture images of internal structures of materials and components.

    • Ultrasonic Testing uses high-frequency sound waves to detect internal flaws and defects in materials.

    • Both technologies provide faster and more accurate results compared to traditional NDT methods.

    • They also offer the ...

  • Answered by AI
  • Q2. Stress and Strain point analysis

Interview Preparation Tips

Interview preparation tips for other job seekers - More know about knowledge on process and technology updates

Rostfrei Steels Interview FAQs

How many rounds are there in Rostfrei Steels Quality Engineer interview?
Rostfrei Steels interview process usually has 1 rounds. The most common rounds in the Rostfrei Steels interview process are Technical.
How to prepare for Rostfrei Steels Quality Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Rostfrei Steels. The most common topics and skills that interviewers at Rostfrei Steels expect are Quality Engineering, Commissioning, Fabrication, HSE and Nebosh.
What are the top questions asked in Rostfrei Steels Quality Engineer interview?

Some of the top questions asked at the Rostfrei Steels Quality Engineer interview -

  1. 7Qc tool capa red bin analysis ...read more
  2. 5core tool spc fmea msa control p...read more

Tell us how to improve this page.

Rostfrei Steels Quality Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Rostfrei Steels Quality Engineer Salary
based on 19 salaries
₹2.4 L/yr - ₹5.1 L/yr
At par with the average Quality Engineer Salary in India
View more details

Rostfrei Steels Quality Engineer Reviews and Ratings

based on 4 reviews

4.6/5

Rating in categories

3.1

Skill development

4.6

Work-life balance

4.5

Salary

2.7

Job security

4.5

Company culture

4.5

Promotions

4.2

Work satisfaction

Explore 4 Reviews and Ratings
Site Engineer
47 salaries
unlock blur

₹1.9 L/yr - ₹7.2 L/yr

Production Engineer
33 salaries
unlock blur

₹2.3 L/yr - ₹5 L/yr

Design Engineer
24 salaries
unlock blur

₹2.2 L/yr - ₹7 L/yr

Project Engineer
20 salaries
unlock blur

₹2.8 L/yr - ₹4.8 L/yr

Quality Engineer
19 salaries
unlock blur

₹2.4 L/yr - ₹5.1 L/yr

Explore more salaries
Compare Rostfrei Steels with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview