Filter interviews by
I applied via Approached by Company and was interviewed before Feb 2023. There was 1 interview round.
Steel is an alloy of iron and carbon. Types include carbon steel, alloy steel, and stainless steel. SS is called stainless due to its resistance to corrosion.
Steel is an alloy of iron and carbon, with carbon content typically less than 2%.
Types of steel include carbon steel, alloy steel, and stainless steel.
Mild Steel (MS) is a type of carbon steel with low carbon content, while Stainless Steel (SS) contains chromium f...
Stainless steel is a metal alloy composed of iron, chromium, nickel, and other elements.
Stainless steel is primarily composed of iron, with a minimum of 10.5% chromium content.
Additional elements like nickel, manganese, and molybdenum may be added for specific properties.
The most common grades of stainless steel are 304 (18% chromium, 8% nickel) and 316 (16% chromium, 10% nickel).
Top trending discussions
posted on 27 Jun 2021
I applied via Walk-in and was interviewed in Dec 2020. There was 1 interview round.
I applied via Naukri.com and was interviewed in Aug 2020. There was 1 interview round.
A lance is a long, pointed weapon used in medieval warfare.
Lances were typically made of wood or metal.
They were used by knights on horseback to charge at their enemies.
The length of a lance varied, but it was usually between 9 and 14 feet long.
Lances were often decorated with banners or flags to identify the knight carrying it.
The use of lances declined with the advent of firearms in warfare.
Tilt drive is a mechanism used in construction to tilt heavy objects or structures.
Tilt drive is commonly used in the construction of bridges, buildings, and large machinery.
It involves the use of hydraulic cylinders or motors to tilt the object or structure.
The tilt drive system must be carefully designed and engineered to ensure safety and stability.
Proper maintenance and inspection of the tilt drive system is crucia...
ID fan stands for Induced Draft fan which is used to create negative pressure in a boiler.
ID fan is used to draw flue gases from the furnace and exhaust them to the atmosphere.
It helps in maintaining the proper flow of air and gases in the boiler.
ID fan is typically installed at the outlet of the boiler.
It is driven by an electric motor or steam turbine.
The size and capacity of ID fan depend on the size of the boiler a...
Bernoulli theorem is a principle that describes the relationship between fluid speed and pressure.
States that as the speed of a fluid increases, the pressure within the fluid decreases
Used to explain the lift force generated by an airplane wing
Applicable to both incompressible and compressible fluids
Bearings are used to reduce friction between two moving parts. There are different types of bearings and each requires specific maintenance.
Types of bearings include ball bearings, roller bearings, plain bearings, and fluid bearings.
Ball bearings are the most common type and require regular lubrication.
Roller bearings are used for heavy loads and require periodic cleaning and lubrication.
Plain bearings are simple and r...
Design of gears involves selecting appropriate gear type, size, material, and tooth profile for efficient power transmission.
Gears are used to transmit power and motion between two rotating shafts.
The gear type and size are selected based on the required speed ratio and torque.
The material selection depends on the application and operating conditions.
The tooth profile is designed to ensure smooth and efficient power tr...
Bearings are mechanical components that reduce friction between moving parts and support axial and radial loads.
Bearings work by allowing two surfaces to roll or slide over each other with minimal friction.
They are designed to support loads in a specific direction, such as radial or axial.
There are several types of bearings, including ball bearings, roller bearings, and plain bearings.
Ball bearings use balls to reduce ...
I applied via Company Website and was interviewed in Sep 2020. There was 1 interview round.
Safety refers to the condition of being protected from harm, danger, or injury.
Safety involves taking precautions to prevent accidents or injuries
It includes following safety guidelines and procedures
Safety is important in all aspects of life, including work, home, and leisure activities
Examples of safety measures include wearing protective gear, using safety equipment, and practicing safe behaviors
Safety is a shared r...
posted on 18 Jan 2025
I was interviewed before Jan 2024.
A transformer operates on the principle of electromagnetic induction to transfer electrical energy between two or more circuits.
Transformers consist of two coils of wire, known as the primary and secondary coils, wrapped around a core made of ferromagnetic material.
When an alternating current flows through the primary coil, it creates a changing magnetic field in the core.
This changing magnetic field induces a voltage ...
A transformer's rated capacity is expressed in terms of its maximum power output, typically in kilovolt-amperes (kVA).
Rated capacity is expressed in kVA to indicate the maximum power output the transformer can handle.
This rating helps determine the appropriate size of transformer needed for a specific application.
For example, a transformer with a rated capacity of 500 kVA can handle a maximum power output of 500 kilovo...
posted on 27 Apr 2023
I applied via Campus Placement
I applied via Naukri.com and was interviewed in Jul 2021. There were 3 interview rounds.
I applied via Referral and was interviewed in Aug 2024. There was 1 interview round.
LT stands for Low Tension and HT stands for High Tension. They refer to different voltage levels used in electrical systems.
LT refers to voltage levels below 1000V, while HT refers to voltage levels above 1000V.
LT is commonly used in residential and small commercial buildings, while HT is used in industrial and large commercial buildings.
LT systems are generally safer and easier to maintain compared to HT systems.
Examp...
Circuit breakers are electrical switches designed to protect electrical circuits from damage caused by overload or short circuit.
Circuit breakers automatically interrupt the flow of electricity when a fault is detected.
They can be reset manually after tripping to restore power.
Common types include thermal-magnetic, magnetic, and hydraulic-magnetic circuit breakers.
Examples include miniature circuit breakers (MCBs) and
A diode is an electronic component that allows current to flow in one direction only.
Diodes are commonly used to convert AC to DC in power supplies.
They are also used to protect circuits from reverse polarity.
Diodes have a forward voltage drop, typically around 0.7V.
They can be used in rectifier circuits to convert AC to DC.
Diodes are also used in signal processing circuits to separate AC and DC components.
AC and DC are two types of electrical current with different characteristics.
AC stands for alternating current, which periodically changes direction.
DC stands for direct current, which flows in one direction.
AC is commonly used in household appliances and power distribution systems.
DC is commonly used in batteries and electronic devices.
AC can be easily converted to different voltage levels using transformers.
DC is mor...
I chose engineering because I have always been fascinated by how things work and wanted to use my problem-solving skills to make a positive impact on the world.
Passion for understanding how things work
Desire to use problem-solving skills
Interest in making a positive impact on the world
JSW Steel is one of India's leading steel producers with a strong presence in various sectors.
JSW Steel is a part of the JSW Group, a conglomerate with interests in steel, energy, infrastructure, cement, and more.
The company has multiple manufacturing plants in India, including in Karnataka, Maharashtra, and Tamil Nadu.
JSW Steel produces a wide range of products including hot-rolled coils, cold-rolled coils, galvanized...
I applied via Campus Placement and was interviewed in Feb 2022. There were 3 interview rounds.
Basic electrical questions , some drive related questions and some questions come from electrical machines
Stress strain diagram shows the relationship between stress and strain in a material.
Shows how a material deforms under stress
Yield point indicates when material starts to deform permanently
Ultimate strength is the maximum stress a material can withstand
Failure point is when material breaks
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Assistant Engineer
94
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
48
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
39
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
30
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
Jindal Steel and Power