Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Renesas Electronics India PCB Layout Design Engineer Interview Questions and Answers

Updated 9 Jan 2025

Renesas Electronics India PCB Layout Design Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is the CMOS?
  • Ans. 

    CMOS stands for Complementary Metal-Oxide-Semiconductor, a technology used in integrated circuits for digital logic functions.

    • CMOS technology uses both NMOS and PMOS transistors to achieve low power consumption and high noise immunity.

    • It is commonly used in microprocessors, memory chips, and other digital logic circuits.

    • CMOS technology allows for the implementation of complex digital systems on a single chip.

    • One of the...

  • Answered by AI

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Indeed and was interviewed before Jan 2024. There were 4 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Questions based on analog circuit design, verilog modules, register transistor logics, CMOS etc
  • Q2. Common questions related to analog circuits, specifically focusing on MOSFETs.
Round 2 - Technical 

(1 Question)

  • Q1. Project related questions mostly based on practical implementations and issues debugged.
Round 3 - Technical 

(1 Question)

  • Q1. Project related questions and managerial questions.
Round 4 - HR 

(1 Question)

  • Q1. Typical HR questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for best and expect the worst in terms of interview experience. HR management is worst and they'll keep finding replacements of yours even after selecting. So you should also have plan B incase your candidature gets rejected. I declined the offer and joined another company.

Interview Preparation Tips

Round: Test
Experience: Questions were from digital Electronics which included realization of counters using JK FF,Sequence detector,Boolean expression reduction,One shot and drawing waveforms of some digital circuits.Questions were also their from pipelinig,finding out MIPS,power consumption of two processors,Small signal analysis of MOSFETs,Buffer using CMOS ,finding out the type of filter given block diagram(control theory).Questions were easy and required step by step realization.
Tips: Prepare digital Electronics very well as it has 50% weightage in paper. Pipelinig is important. Some basics concepts of CMOS is very necessary.
Duration: 1hr 15 min minute
Total Questions: 12

Round: Technical Interview
Experience: First they asked to introduce yourself.
Then they asked about projects & Internship.
STA,EEPROM,EPROM,DRAM,SRAM,CACHE Memory,Pipelining,DMA was asked in depth.
Difference between clock skew and Jitter.
Asked whether I know any Hardware Languages.
XOR gate using 2:1 MUX.
Gave a waveform,had to realize using DFF and considering the delay.
Tips: Study STA very well.
Questions will be asked in depth from any topic.

Round: HR Interview
Experience: Family Background
Why NXP
Hobbies


Skill Tips: Study Digital Electronics very well
Skills: Analog Electronics, Microprocessor, Vlsi Basics, Digital Circuits
College Name: BIT Mesra

I applied via Campus Placement and was interviewed in Jan 2016. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Reduction of 3D Kmap ?
  • Ans. 

    Reduction of 3D Kmap involves simplifying a 3D truth table to minimize the number of logic gates required.

    • 3D Kmap is a graphical representation of a truth table with three variables

    • Reduction involves grouping adjacent cells with the same output value

    • The goal is to minimize the number of groups and variables in each group

    • Simplification can be done using Boolean algebra or Karnaugh maps

    • Example: Reducing a 3D Kmap with in

  • Answered by AI
  • Q2. Asked about basics of digital and analog
  • Q3. Asked about the questions I did wrong in the screening test
  • Q4. Asked about my interest, project and family
  • Q5. Explanation of job description
  • Ans. 

    A design engineer is responsible for creating and developing innovative designs for products or systems.

    • Designing and prototyping new products

    • Collaborating with cross-functional teams to ensure design feasibility

    • Using CAD software to create detailed drawings and specifications

    • Testing and evaluating prototypes to ensure functionality and performance

    • Making design improvements based on feedback and testing results

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: I was unable to solve the problem properly but after that he gave me a normal k map to solve.

Round: Technical Interview
Experience: Asked about inverter and delay dependency on temperature and other parameters

Round: Technical Interview
Experience: I managed to answer most of the answer that i did wrong since i had discussed it with my friends after coming from college.

Round: HR Interview
Experience: provided answers that relates company requirements

Round: HR Interview
Experience: Listened carefully about their job description and work environment

College Name: IIT Madras

Interview Preparation Tips

Round: Test
Experience: A written test with Core - Essay Type Questions.
Tips: Revise previous core VLSI courses (Digital Circuits, Digital IC Design, Analog Circuits, and Solid State Devices).
Duration: 60 minutes

Round: Interview
Experience: 3 rounds of interviews (15-20 minutes each)Basic digital concepts, ability to analyze a given circuit
Tips: Be thorough with your basic electronics conceptsPerformance in the technical interview counts a lotAnalog devices didn't need any particular course or project, they mainly look for strong basics in digital/analog circuit theory, and ability to analyzeRevise all of your core courses, starting from the basics

Round: Interview
Experience: For the HR round, questions about your background, family, interests etc. are asked

General Tips: Learn to keep cool, even under stress, and have confidence on your knowledge
College Name: IIT Madras

Interview Questionnaire 

2 Questions

  • Q1. Based on the Ability to analyse a given circuit
  • Q2. Based on Resume and personal details

Interview Preparation Tips

Round: Test
Duration: 60 minutes

Round: HR Interview
Experience: No prep required for HR round, asked few personal questions (about your background, family, interests etc.)

General Tips: Revise all of your core courses, starting from the basics. Junta usually stumble when asked questions from basic fundaes.
I felt a lot of stress before my first interview, which affected my performance badly. Learn to keep cool, and have confidence on your knowledge.
Skill Tips: You should have ability to analyse a given circuit
Skills: Digital electronics basics,
College Name: IIT MADRAS

Interview Preparation Tips

Round: Test
Experience: Questions were from Digital Electronics,Microprocessors and some from CMOS.
50% Digital Electronics.
1 X Output waveform drawing from circuit of FFs & gates
1 X Realize inverter from given two blocks
1 X CMOS implementation of gates
1 X Realize digital circuit for given waveform
1 X MIPS & Pipelining
1 X Processors power Dissipation calculation
1 X Small Signal analysis of CMOS
1 X Compare two given buffers circuits(CMOS)
1 X Transfer function calculation(Control Theory)
1 X Counter using JK FF
1 X Sequence Detector

Tips: Study digital electronics very well.

Duration: 1 hr 45 min minute
Total Questions: 12

Round: Technical Interview
Experience: Indroduction
Projects & Internship
Discussions in DEPTH on:
Pipelining
STA
MIPS
Memory(flash memory,DRAM,SRAM)
CACHE Memory
DMA
Digital circuit realization for given waveform
XOR Gate using 2:1 MUX
Tips: Prepare Digital electronics and Microprocessors very well.Sta is very important.Panel will go deep into the topics to check ur technical knowledge.
TIPS: Be confident and your opinion should be strong.Stand by what you say.Do not get confused.And when panel asks to solve any digital circuits, speak loud what is in your mind and what approach you are using.Be honest.

Round: HR Interview
Experience: Family Background
Why Freescale


Skills: Static Timing Analysis (STA), Memory, CMOS Circuits, Microprocessor, Digital Circuits
College Name: BIT Mesra
Motivation: I had interest in core electronics

Interview Preparation Tips

Round: Test
Experience: Written test for a duration of 1.5 hours
Test was based on VLSI design

Round: Interview
Experience: Technical and HR round are held together
Digital VLSI - Verilog skills, state machines, setup and hold time issues were tested

General Tips: Some questions in the test are repeated, so it might help to talk to a few people in advance
Questions are mainly related to VLSI mainly-Digital IC design, analog circuits
Skills: Verilog Skills, State Machines, Setup and Hold Times issues
College Name: IIT MADRAS

Design Engineer Interview Questions & Answers

Texas Instruments user image Sai Vihari Chaturvedula

posted on 28 Aug 2016

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume is not given any due importance in selection for further rounds . But honesty is very important as it counts once you are selected for HR round .
Tips: Try to be one hundred percent honest . And put your projects and course work in the beginning. They don't care your POR s and extra curricular activities.

Round: Test
Experience: Hardware - Questions are mainly from ELECTRICAL CIRCUITS (RLC ckts) , Analog ckts. Amplifiers , Opamps , digital system design . Aptitude section is very easy . Hardware section is tough .I felt Signal processing was easier , indeed I got selected for that profile .
Tips: Prepare thoroughly these courses :- EMC , DIGITAL SYSTEMS, NETWORKS AND SYSTEMS,ANALOG & DIGITAL SIGNAL PROCESSING , ANALOG CKTS COURSES .THAT SHOULD BE ENOUGH .
Duration: 90 - Signal Processing minutes
Total Questions: 120 - Hardware and aptitude

Round: Group Discussion
Experience: No
Tips: No

Duration: 2
College Name: IIT Madras

Interview Preparation Tips

Round: Test
Experience: Test was subjective and questions were asked from basic analog, digital design, VHDL and VLSI circuits.

Round: Technical Interview
Experience: Had 3 technical interviews each around 25 minutes. They asked me about my summer internship and
questions from microcontroller architecture and its interfacing. Then they asked me the questions
from those problems which I didn't attempt in the written test.
Tips: For electrical students, it might be a bit challenging. I took an elective on Microcontroller in 7th sem which
helped me a lot during the interview. You might want to brush up your concepts of 8085, digital, OPAMPs
and analog

Round: HR Interview
Experience: My family background and my future goals were asked. They asked me about
my internship project and wanted to know what I learnt during the internship. Then I asked a few questions
from them about the company work culture and growth opportunities

College Name: IIT Roorkee
Contribute & help others!
anonymous
You can choose to be anonymous

Renesas Electronics India Interview FAQs

How many rounds are there in Renesas Electronics India PCB Layout Design Engineer interview?
Renesas Electronics India interview process usually has 1 rounds. The most common rounds in the Renesas Electronics India interview process are Technical.

Recently Viewed

INTERVIEWS

Renesas Electronics India

No Interviews

INTERVIEWS

Renesas Electronics India

No Interviews

INTERVIEWS

Zessta Software Services

No Interviews

CAMPUS PLACEMENT

RV College Of Engineering (RVCE)

INTERVIEWS

Meraki Services

No Interviews

INTERVIEWS

Zessta Software Services

No Interviews

INTERVIEWS

Renesas Electronics India

No Interviews

INTERVIEWS

Vistaar Technologies

No Interviews

INTERVIEWS

LTIMindtree

30 top interview questions

INTERVIEWS

WatchGuard Technologies

No Interviews

Tell us how to improve this page.

Renesas Electronics India PCB Layout Design Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Qualcomm Interview Questions
3.8
 • 255 Interviews
Intel Interview Questions
4.2
 • 215 Interviews
Texas Instruments Interview Questions
4.1
 • 120 Interviews
Synopsys Interview Questions
3.9
 • 88 Interviews
Molex Interview Questions
3.9
 • 53 Interviews
Lam Research Interview Questions
3.7
 • 44 Interviews
Broadcom Interview Questions
3.4
 • 41 Interviews
View all

Fast track your campus placements

View all
Staff Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Application Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Renesas Electronics India with

Texas Instruments

4.1
Compare

Analog Devices

4.0
Compare

Infineon Technologies

3.9
Compare

STMicroelectronics

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview