Filter interviews by
Clear (1)
Latch is level triggered and stores data temporarily, while flip flop is edge triggered and stores data permanently.
Latch is level triggered, while flip flop is edge triggered
Latch stores data temporarily, while flip flop stores data permanently
Latch requires continuous input to hold the output, while flip flop retains the output until a new input is received
A NAND gate can be used to create a NOR gate by connecting two NAND gates in series.
Connect the outputs of two NAND gates together
Connect the inputs of the two NAND gates to the same input signal
The output of the combined NAND gates will act as a NOR gate
Top trending discussions
I applied via Campus Placement
I was interviewed in Sep 2017.
Overlap-add is implemented by dividing the input signal into overlapping segments, applying a window function, and adding the segments together.
Overlap-add is a method used in digital signal processing to efficiently convolve long signals with finite impulse response (FIR) filters.
The input signal is divided into overlapping segments, typically with a length equal to the filter length.
A window function, such as the Ham...
The Nyquist criterion states that in order to accurately sample a signal, the sampling rate must be at least twice the highest frequency component of the signal.
The Nyquist criterion is used in digital signal processing to prevent aliasing.
It ensures that the sampling rate is sufficient to capture all the information in the signal.
The criterion is based on the concept of the Nyquist frequency, which is half the samplin...
Demodulating a QAM signal involves separating the amplitude and phase components to recover the original data.
QAM signals combine amplitude and phase modulation
Demodulation involves separating the amplitude and phase components
Techniques like coherent demodulation and quadrature demodulation are used
Coherent demodulation uses a local oscillator to recover the phase component
Quadrature demodulation separates the in-phas
Interpolation in discrete-time domain involves estimating values between known data points.
Interpolation is used to fill in missing data or estimate values between known data points.
Common interpolation methods include linear interpolation, polynomial interpolation, and spline interpolation.
Linear interpolation calculates values by drawing a straight line between two adjacent data points.
Polynomial interpolation uses a...
Yes, I would take the intern in Hyderabad to mentor and guide them in their learning journey.
Taking an intern can provide an opportunity to mentor and guide a budding engineer.
It can also help in delegating tasks and projects, allowing for more productivity.
Having an intern can bring fresh perspectives and ideas to the team.
Interns can also assist in research and development projects, aiding in innovation.
Supervising a...
I applied via Company Website and was interviewed in Jan 2024. There were 2 interview rounds.
I applied via LinkedIn and was interviewed in May 2022. There were 3 interview rounds.
Easy questions were there in round 10 . . . . . . .
I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.
Given all king of aptitude part
Bode plot for CS amplifier shows gain and phase response with frequency.
Bode plot consists of two plots - one for gain (in dB) and one for phase shift (in degrees) vs frequency.
The gain plot typically shows a high-pass filter response with a peak at the resonant frequency.
The phase plot shows a 180 degree phase shift at the resonant frequency.
Bode plots are useful for analyzing frequency response of amplifiers and filt
Questions on dgital electronics and circuits
based on 1 interview
Interview experience
Staff Engineer
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Software Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Application Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Texas Instruments
Analog Devices
Infineon Technologies
STMicroelectronics