AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Texas Instruments Hardware Engineer Interview Questions and Answers
Texas Instruments Hardware Engineer Interview Experiences
1 interview found
SARATH P
Aptitude, Digital Electronics.
Top trending discussions
Interview questions from similar companies
Anonymous
Interview Preparation Tips
Experience: Test was subjective and questions were asked from basic analog, digital design, VHDL and VLSI circuits.
Round: Technical Interview
Experience: Had 3 technical interviews each around 25 minutes. They asked me about my summer internship and
questions from microcontroller architecture and its interfacing. Then they asked me the questions
from those problems which I didn't attempt in the written test.
Tips: For electrical students, it might be a bit challenging. I took an elective on Microcontroller in 7th sem which
helped me a lot during the interview. You might want to brush up your concepts of 8085, digital, OPAMPs
and analog
Round: HR Interview
Experience: My family background and my future goals were asked. They asked me about
my internship project and wanted to know what I learnt during the internship. Then I asked a few questions
from them about the company work culture and growth opportunities
College Name: IIT Roorkee
Interview Questionnaire
2 Questions
- Q1. Why are you interested in freescale ?
- Ans.
I am interested in Freescale because of their innovative technology and strong reputation in the industry.
Freescale has a history of developing cutting-edge technology
Their reputation in the industry is strong and respected
I am excited about the opportunity to work with a company that values innovation and excellence
- Q2. Hobbies, family background etc. and future plans
Interview Preparation Tips
Total Questions: 15
Round: Technical Interview
Experience: Panel discussed questions attempted incorrectly or not attempted. Topics asked separately: RAM, MOSFET, Memory, Interrupts, FIFO etc.Few puzzles were also asked.
General Tips: Topics that should be covered: Digital Electronics, Microprocessors, Basic Electronics, K Map and FSM questions.
Skills:
College Name: BIT MESRA
Interview Preparation Tips
Experience: They asked me about my thesis and some device related questions as my thesis was on modelling of device. Questions were basic and were related to variation of device parameters with environmental factors and other parameters. Apart from that, several questions related to basic digital circuits were also asked concerning flip flops, latches, setup time and hold time. The technical interview went on for approximately 1 hour.
Round: HR Interview
Experience: The HR round lasted for about 5 mins only. The HR person asked me whether I were interested in going for PhD or not and about my hobbies and interests. Overall, the interviewers are very friendly and asked basic questions only.
Tips: Prepare your CV well, have a good CPI, do your thesis sincerely, concentrate on your basics and you will stand a very good chance of getting selected.
General Tips: Do the courses thoroughly, make good course projects and start preparing for the placement session at least 1 month early.
Don’t ever mention to them that you are interested in higher studies even if you are applying. In case you don’t get a job at your targeted company, don’t lose hope and move on to the next one.
Concentrate on your preparation and the things that are of utmost importance, don’t get bogged down by pressure. Be optimistic and cheerful, because confidence really helps during interviews.
Final Tips :
1. Be confident and enthusiastic in your response to questions because you have to make them understand that you are interested in the profile.
2. Chalk out a plan to strengthen your strong points and address the weak ones.
College Name: IIT Kanpur
I applied via Recruitment Consulltant and was interviewed before Aug 2021. There was 1 interview round.
(2 Questions)
- Q1. What is aspect ratio?
- Ans.
Aspect ratio is the ratio of an object's width to its height.
Aspect ratio is commonly used in design and engineering to maintain proportionality.
It is often expressed as a ratio, such as 16:9 for a widescreen TV.
Aspect ratio can affect the visual perception and usability of a product.
It is important to consider aspect ratio when designing graphics or layouts for different devices or mediums.
- Q2. How do you decide stackup?
- Ans.
Stackup is decided based on the number of layers, signal integrity requirements, and manufacturing constraints.
Consider the number of layers required for the design
Evaluate signal integrity requirements and impedance control
Take into account manufacturing constraints such as minimum trace width and spacing
Balance cost and performance
Use simulation tools to optimize the stackup
Consult with PCB fabricators for their reco
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Jan 2021. There were 3 interview rounds.
(1 Question)
- Q1. What is a cache? What does tag used for in a cache?
- Ans.
A cache is a high-speed data storage layer that stores frequently accessed data to reduce access time. A tag is used to identify the location of data in the cache.
Cache is a temporary storage that holds frequently accessed data
It reduces the access time by providing faster access to data
Tag is used to identify the location of data in the cache
Tag is a part of the cache memory address
Cache can be implemented in hardware...
C Coding questions
(3 Questions)
- Q1. What is your family background?
- Q2. What are your strengths and weaknesses?
- Q3. Tell me about yourself.
Interview Preparation Tips
Skills evaluated in this interview
Interview Preparation Tips
Experience: Questions were from digital Electronics which included realization of counters using JK FF,Sequence detector,Boolean expression reduction,One shot and drawing waveforms of some digital circuits.Questions were also their from pipelinig,finding out MIPS,power consumption of two processors,Small signal analysis of MOSFETs,Buffer using CMOS ,finding out the type of filter given block diagram(control theory).Questions were easy and required step by step realization.
Tips: Prepare digital Electronics very well as it has 50% weightage in paper. Pipelinig is important. Some basics concepts of CMOS is very necessary.
Duration: 1hr 15 min minute
Total Questions: 12
Round: Technical Interview
Experience: First they asked to introduce yourself.
Then they asked about projects & Internship.
STA,EEPROM,EPROM,DRAM,SRAM,CACHE Memory,Pipelining,DMA was asked in depth.
Difference between clock skew and Jitter.
Asked whether I know any Hardware Languages.
XOR gate using 2:1 MUX.
Gave a waveform,had to realize using DFF and considering the delay.
Tips: Study STA very well.
Questions will be asked in depth from any topic.
Round: HR Interview
Experience: Family Background
Why NXP
Hobbies
Skill Tips: Study Digital Electronics very well
Skills: Analog Electronics, Microprocessor, Vlsi Basics, Digital Circuits
College Name: BIT Mesra
Saba
Interview Preparation Tips
Experience: Questions were from Digital Electronics,Microprocessors and some from CMOS.
50% Digital Electronics.
1 X Output waveform drawing from circuit of FFs & gates
1 X Realize inverter from given two blocks
1 X CMOS implementation of gates
1 X Realize digital circuit for given waveform
1 X MIPS & Pipelining
1 X Processors power Dissipation calculation
1 X Small Signal analysis of CMOS
1 X Compare two given buffers circuits(CMOS)
1 X Transfer function calculation(Control Theory)
1 X Counter using JK FF
1 X Sequence Detector
Tips: Study digital electronics very well.
Duration: 1 hr 45 min minute
Total Questions: 12
Round: Technical Interview
Experience: Indroduction
Projects & Internship
Discussions in DEPTH on:
Pipelining
STA
MIPS
Memory(flash memory,DRAM,SRAM)
CACHE Memory
DMA
Digital circuit realization for given waveform
XOR Gate using 2:1 MUX
Tips: Prepare Digital electronics and Microprocessors very well.Sta is very important.Panel will go deep into the topics to check ur technical knowledge.
TIPS: Be confident and your opinion should be strong.Stand by what you say.Do not get confused.And when panel asks to solve any digital circuits, speak loud what is in your mind and what approach you are using.Be honest.
Round: HR Interview
Experience: Family Background
Why Freescale
Skills: Static Timing Analysis (STA), Memory, CMOS Circuits, Microprocessor, Digital Circuits
College Name: BIT Mesra
Motivation: I had interest in core electronics
Shivam Singh
(1 Question)
- Q1. Sequence detector circuit
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 2 interview rounds.
(1 Question)
- Q1. Question related to FPGA. It's flow, timing violation ans it's solution. Verilog questions blocking and non blocking assignment etc , basic question from vivado
(1 Question)
- Q1. Mostly same question related to FPGA
Interview Preparation Tips
Texas Instruments Interview FAQs
Tell us how to improve this page.
Texas Instruments Interviews By Designations
- Texas Instruments Analog Design Engineer Interview Questions
- Texas Instruments Analog Engineer Interview Questions
- Texas Instruments Analog Layout Engineer Interview Questions
- Texas Instruments Digital Design Engineer Interview Questions
- Texas Instruments Intern Interview Questions
- Texas Instruments Design Engineer Interview Questions
- Texas Instruments Embedded Software Engineer Interview Questions
- Texas Instruments Digital Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Hardware & Networking Engineer Interview Questions
- Computer Hardware & Networking Engineer Interview Questions
- Computer Hardware Engineer Interview Questions
- System Engineer Hardware Interview Questions
- Hardware Design Engineer Interview Questions
- Computer Hardware Technician Interview Questions
- Senior Hardware & Networking Engineer Interview Questions
- Hardware & Networking Technician Interview Questions
- Show more
Texas Instruments Hardware Engineer Interview Process
based on 1 interview
Interview experience
Hardware Engineer Interview Questions from Similar Companies
Fast track your campus placements
|
Analog Design Engineer
157
salaries
|  ₹15.2 L/yr - ₹42 L/yr |
|
Software Engineer
72
salaries
| ₹9.6 L/yr - ₹39.2 L/yr |
|
Senior NPD Engineer
64
salaries
| ₹20.2 L/yr - ₹25.9 L/yr |
|
Design Engineer
52
salaries
| ₹9.9 L/yr - ₹38 L/yr |
|
Digital Design Engineer
51
salaries
| ₹17 L/yr - ₹37 L/yr |
Qualcomm
Intel
TDK India Private Limited
Molex
- Home >
- Interviews >
- Texas Instruments Interview Questions >
- Texas Instruments Hardware Engineer Interview Questions
