i
Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
Top trending discussions
Safety refers to the condition of being protected from harm or danger.
Safety involves identifying and mitigating potential hazards in the workplace or environment
It includes implementing safety protocols and procedures to prevent accidents and injuries
Safety also involves providing proper training and equipment to ensure the well-being of individuals
Examples: wearing personal protective equipment, following safety guid
Sky folding is not a recognized term in the field of safety engineering.
There is no known concept or practice called sky folding in safety engineering.
It is possible that the term was used incorrectly or is not commonly known in the field.
It is important to clarify the question or term with the interviewer for better understanding.
An odite is a term that does not have a standard definition in the context of safety engineering.
Odite may be a misspelling or a typo of a different term.
It is important to clarify the intended meaning of the term in order to provide an accurate answer.
Without further context or clarification, it is difficult to provide a specific answer to the question.
A worker permit is a document issued by an employer allowing a worker to perform specific tasks or enter certain areas.
Worker permits are used to ensure that only authorized personnel are performing certain tasks.
They may be required for tasks such as working in confined spaces, operating heavy machinery, or handling hazardous materials.
Worker permits typically outline the specific tasks or areas that the worker is aut...
A pass is a document or certification that allows a person or vehicle to proceed or enter a certain area.
A pass may be required to access restricted areas in a workplace or event
Passes can also be used for toll roads or parking facilities
Examples include security passes, visitor passes, and parking permits
A near miss is an incident that could have resulted in injury, damage, or loss but did not.
A near miss is a close call where an accident almost happened but was narrowly avoided.
It is important to report near misses to prevent future accidents and improve safety measures.
Examples of near misses include a tool falling from a height but narrowly missing a worker, or a vehicle almost colliding with another but swerving in
posted on 27 May 2024
I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.
Fire is a rapid chemical reaction that releases heat, light, and various gases.
Fire is a rapid oxidation process that releases energy in the form of heat and light.
It requires three elements to occur: fuel, oxygen, and heat.
Fires can be classified based on the type of fuel involved, such as Class A (wood, paper), Class B (flammable liquids), etc.
Fire safety measures include fire extinguishers, smoke detectors, and evac
Safety is the state of being protected from harm, danger, or injury.
Safety involves identifying and mitigating risks to prevent accidents or injuries.
It includes following safety protocols and procedures to ensure a safe work environment.
Safety also involves providing proper training and equipment to employees to prevent accidents.
Regular safety inspections and audits are conducted to identify potential hazards and add...
Maintain fire pump pressure by regular testing, inspection, and maintenance.
Regularly test the fire pump to ensure it is functioning properly
Inspect the pump for any leaks, damage, or blockages
Perform routine maintenance such as lubrication and cleaning
Check the pressure gauges regularly to ensure they are within the correct range
Train personnel on how to properly operate the fire pump in case of emergency
I was interviewed before Feb 2024.
posted on 30 Aug 2022
I applied via Walk-in and was interviewed in Mar 2022. There were 4 interview rounds.
An aptitude test is an assessment used to determine a candidate's cognitive ability or personality.
Coding tests are programming assessment tools used to objectively evaluate a candidate's programming skills across parameters such as problem-solving, coding aptitude, and de-bugging. Coding tests are widely used by organizations as an intrinsic step in the technical recruitment process.
Maths reasoning technical
I applied via Job Fair
posted on 27 May 2024
I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.
Fire is a rapid chemical reaction that releases heat, light, and various gases.
Fire is a rapid oxidation process that releases energy in the form of heat and light.
It requires three elements to occur: fuel, oxygen, and heat.
Fires can be classified based on the type of fuel involved, such as Class A (wood, paper), Class B (flammable liquids), etc.
Fire safety measures include fire extinguishers, smoke detectors, and evac
Safety is the state of being protected from harm, danger, or injury.
Safety involves identifying and mitigating risks to prevent accidents or injuries.
It includes following safety protocols and procedures to ensure a safe work environment.
Safety also involves providing proper training and equipment to employees to prevent accidents.
Regular safety inspections and audits are conducted to identify potential hazards and add...
Maintain fire pump pressure by regular testing, inspection, and maintenance.
Regularly test the fire pump to ensure it is functioning properly
Inspect the pump for any leaks, damage, or blockages
Perform routine maintenance such as lubrication and cleaning
Check the pressure gauges regularly to ensure they are within the correct range
Train personnel on how to properly operate the fire pump in case of emergency
I applied via Referral and was interviewed in Jul 2021. There were 5 interview rounds.
Safety policy is a set of guidelines and procedures implemented by an organization to ensure the safety and well-being of its employees and stakeholders.
Safety policy outlines the organization's commitment to safety and provides a framework for managing safety risks.
It includes procedures for identifying hazards, assessing risks, and implementing control measures.
Safety policy promotes a safety culture within the organ...
An emergency plan is a set of procedures and protocols designed to respond to and manage emergency situations.
An emergency plan outlines the roles and responsibilities of individuals during an emergency.
It includes steps to be taken to mitigate the impact of the emergency and ensure the safety of people and property.
Emergency plans often include evacuation procedures, communication protocols, and emergency contact info...
Personal protective equipment (PPE) refers to protective clothing, helmets, goggles, or other garments or equipment designed to protect the wearer's body from injury or infection.
PPE includes items such as gloves, masks, safety glasses, helmets, earplugs, and protective clothing.
It is used in various industries like construction, healthcare, manufacturing, and firefighting.
PPE is essential to minimize the risk of workp...
Confined spaces are areas that are not designed for continuous occupancy and have limited entry and exit points.
Tanks
Silos
Vats
Pipelines
Tunnels
Sewers
Storage bins
Boilers
Underground vaults
Crawl spaces
Unsafe act refers to actions or behaviors that can lead to accidents or injuries, while unsafe condition refers to physical conditions or situations that can cause harm.
Unsafe act: Actions or behaviors that disregard safety rules or procedures.
Unsafe condition: Physical conditions or situations that pose a risk to safety.
Unsafe acts can include not wearing personal protective equipment, operating machinery without prop...
Fall protection systems are safety measures designed to prevent or minimize injuries from falls in the workplace.
Fall protection systems include personal protective equipment (PPE) such as harnesses, lanyards, and lifelines.
Guardrails and safety nets are also fall protection systems commonly used in construction and industrial settings.
Anchor points and tie-off points are essential components of fall protection systems...
based on 1 interview
Interview experience
Senior Engineer
2.3k
salaries
| ₹6 L/yr - ₹19 L/yr |
Assistant Manager
1.6k
salaries
| ₹7.3 L/yr - ₹26.7 L/yr |
Engineer
1.4k
salaries
| ₹2.7 L/yr - ₹10.9 L/yr |
Design Engineer
669
salaries
| ₹3 L/yr - ₹11.3 L/yr |
Deputy Manager
508
salaries
| ₹9.8 L/yr - ₹30.7 L/yr |
Hyundai Motor India Engineering
Ford Technology Services India
Mahindra & Mahindra
Tata Technologies