Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Reliance Industries Team. If you also belong to the team, you can get access from here

Reliance Industries Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Reliance Industries Mechanical Graduate Engineer Trainee Interview Questions and Answers

Updated 31 Jan 2024

Reliance Industries Mechanical Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Resume based interview but the questions were very deep.
  • Q2. Types of welding processes and testing technologies available. Also, they asked material of the filler and also the material of the machine in which the electrode is kept.

Interview Preparation Tips

Interview preparation tips for other job seekers - Practice the basic HR questions. Read the basic concepts of the academic terms that are mentioned in your resume.

Interview questions from similar companies

Interview Questionnaire 

4 Questions

  • Q1. How does a diesel genrator work?
  • Ans. 

    A diesel generator works by converting diesel fuel into mechanical energy which is then converted into electrical energy.

    • Diesel fuel is injected into the combustion chamber where it ignites and creates high pressure gases that push the piston down, creating mechanical energy.

    • The mechanical energy is then converted into electrical energy through the use of an alternator.

    • The alternator uses a magnetic field and a conduct...

  • Answered by AI
  • Q2. How a diesel engine works
  • Ans. 

    A diesel engine works by compressing air in the cylinder, which heats up and ignites the fuel injected into the cylinder.

    • Air is drawn into the cylinder and compressed by the piston

    • The compressed air heats up and ignites the fuel injected into the cylinder

    • The explosion pushes the piston down, which turns the crankshaft and powers the engine

    • Diesel engines are more efficient than gasoline engines because they compress the...

  • Answered by AI
  • Q3. Why there is no differential in a train
  • Ans. 

    A train doesn't need a differential because its wheels are fixed to the same axle and rotate at the same speed.

    • Train wheels are fixed to the same axle

    • Wheels rotate at the same speed

    • Differential is used in vehicles with wheels that rotate at different speeds

    • Differential allows for smooth turning

  • Answered by AI
  • Q4. Why petrol engines comparison ratio low when compared to a diesel engine
  • Ans. 

    Petrol engines have lower compression ratios compared to diesel engines.

    • Petrol engines have lower compression ratios to prevent knocking or detonation.

    • Diesel engines have higher compression ratios to ignite the fuel without spark plugs.

    • Higher compression ratios in diesel engines result in better fuel efficiency and torque.

    • Petrol engines require lower compression ratios to accommodate the lower octane rating of petrol f...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume was selected and I was invited for an interview
Tips: Resume was selected and I was invited for an interview

Round: Technical + HR Interview
Experience: Sir question was thought and I was giving a quick answer
Tips: Do not give any answer without tension

Skills: Personality, Skills Of Explaining Things, Knowledge About Industries, Knowledge In Ic Engines, Talking Ability

Interview Preparation Tips

Round: Group Activity
Experience: Machine maintenance,, machine PM, work planning, kayzen work, modification work etc.

I applied via Campus Placement and was interviewed before Jul 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About past work and projects

Interview Preparation Tips

Interview preparation tips for other job seekers - Be ready to validate your resume during interview.

I applied via Campus Placement and was interviewed in Mar 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. Tell me about yourself ?
  • Ans. 

    I am a mechanical engineer with expertise in designing and analyzing mechanical systems.

    • I have a Bachelor's degree in Mechanical Engineering from XYZ University.

    • I have worked as a mechanical engineer for 5 years at ABC Company, where I designed and optimized mechanical components for various projects.

    • I am proficient in CAD software such as AutoCAD and SolidWorks, and have experience in conducting simulations and stress...

  • Answered by AI
  • Q2. Different between petrol engine and Diesel engine?
  • Ans. 

    Petrol engines use spark ignition while diesel engines use compression ignition.

    • Petrol engines use spark plugs to ignite the fuel-air mixture, while diesel engines rely on compression to ignite the fuel.

    • Petrol engines have a higher power-to-weight ratio compared to diesel engines.

    • Diesel engines are more fuel-efficient than petrol engines.

    • Petrol engines are typically used in cars, motorcycles, and small vehicles, while ...

  • Answered by AI
  • Q3. Verniers caliper list count and micrometer list count?
  • Ans. 

    Vernier calipers and micrometers are precision measuring tools used in mechanical engineering.

    • Vernier calipers are used to measure dimensions with high accuracy, typically up to 0.02 mm.

    • Micrometers are used for even more precise measurements, typically up to 0.001 mm.

    • Both tools are commonly used in mechanical engineering for dimensional inspection and quality control.

    • Vernier calipers have a sliding scale and a main sca...

  • Answered by AI
  • Q4. Why you chose mech. Steam?
  • Ans. 

    I chose mechanical engineering because of my fascination with steam power and its applications.

    • I have always been intrigued by the power and versatility of steam as a source of energy.

    • Steam technology has a long history and has played a crucial role in the development of various industries.

    • I find the principles of thermodynamics and fluid mechanics involved in steam systems to be intellectually stimulating.

    • Working with...

  • Answered by AI
  • Q5. What is a function of exel?
  • Ans. 

    Excel is a spreadsheet software used for organizing, analyzing and manipulating data.

    • Excel allows users to create tables, charts, and graphs to represent data visually.

    • It can perform complex calculations and analysis on large sets of data.

    • Excel can be used for budgeting, financial analysis, project management, and more.

    • It also has features for data validation, sorting, filtering, and conditional formatting.

    • Excel can im...

  • Answered by AI
  • Q6. How you motivate our worker (employe) ?
  • Ans. 

    Motivating workers is crucial for productivity and job satisfaction.

    • Recognize and appreciate their efforts

    • Provide opportunities for growth and development

    • Create a positive work environment

    • Set clear goals and expectations

    • Offer incentives and rewards

    • Encourage teamwork and collaboration

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - When i first time gived a interview , it was a good for me , because i am fully prepared for interview . And interesting for me , there i use my communication skills , my technical knowledge , and also used general knowledge.

I applied via Approached by Company and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About wmm plant concrete plant and hot mix plant
  • Q2. Machine like grader roller paver tipper and transit mixer excavator

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing
Bcoz tata company is not require any suggesting

I applied via Naukri.com and was interviewed in Sep 2021. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 
Round 3 - Aptitude Test 
Round 4 - Aptitude Test 

Mechanical

Round 5 - Aptitude Test 

Mechanical

Round 6 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - Only maintenance quality checking

I applied via Campus Placement

Interview Preparation Tips

Round: Resume Shortlist
Experience: It was based on CGPA and Tech projects
Tips: Ensure you have explained your tech projects well

Round: Group Discussion
Experience: A very good panel. A lot of good points were raised.
Tips: Make sure you raise your points well
Duration: 20 minutes

Round: Technical Interview
Experience: Tried to test the basics of almost everything that we have studied.

General Tips: Be confident throughout the process. That helps a lot.
Skill Tips: Brush up your courses
Skills: Engineering Knowledge
Duration: 2
College Name: IIT Madras
Motivation: The fact that the role is going to be techno-managerial. Also, the compensation.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Process of production
  • Ans. 

    The process of production involves transforming raw materials into finished products through various stages.

    • Identifying raw materials needed for production

    • Designing the production process

    • Manufacturing the product

    • Quality control checks

    • Packaging and distribution

    • Continuous improvement of production process

  • Answered by AI
  • Q2. Final production process
  • Ans. 

    The final production process involves the last steps in manufacturing a product before it is ready for distribution.

    • Final inspection and quality control checks are conducted to ensure the product meets specifications.

    • Packaging and labeling are completed to prepare the product for shipping.

    • Any necessary finishing touches or assembly steps are done to complete the product.

    • Documentation and record-keeping are finalized to...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for JSW Group Mechanical Engineer interview:
  • Hot Forging
  • Technical Support
  • Testing Tools
  • Production Planning
  • ERP
Interview preparation tips for other job seekers - take interview one on one offline or online ,as per candidate experience u can select it.

I applied via Walk-in and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Why should low width of coil in variation so how can increase ?
  • Ans. 

    Low width of coil can affect performance, increasing it can improve efficiency.

    • Low coil width can lead to poor heat transfer and reduced efficiency

    • Increasing coil width can improve heat transfer and increase efficiency

    • Factors such as space constraints and cost may limit the ability to increase coil width

  • Answered by AI
  • Q2. How can control heat variation of HF plant?
  • Ans. 

    Heat variation in HF plant can be controlled through various methods.

    • Maintaining proper insulation in the plant

    • Using heat exchangers to transfer heat from one process to another

    • Implementing a control system to monitor and adjust temperature

    • Regular maintenance and cleaning of equipment to prevent heat buildup

    • Using cooling towers or water sprays to reduce temperature

    • Optimizing the plant layout to minimize heat transfer b

  • Answered by AI
  • Q3. If rolls elongation is not proper so waveness observed at the time of made pipes?
  • Ans. 

    Improper rolls elongation can cause waveness in pipes during production.

    • Rolls elongation is the process of stretching the metal sheet to the desired thickness.

    • If the elongation is not proper, it can cause uneven thickness and waveness in the pipes.

    • This can lead to defects in the final product and affect its performance.

    • Proper calibration and maintenance of the rolling equipment can prevent this issue.

    • Regular inspection...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basically I am diploma mechanical so I would like to face my interview to related my profession & work place

Reliance Industries Interview FAQs

How many rounds are there in Reliance Industries Mechanical Graduate Engineer Trainee interview?
Reliance Industries interview process usually has 1 rounds. The most common rounds in the Reliance Industries interview process are Technical.
What are the top questions asked in Reliance Industries Mechanical Graduate Engineer Trainee interview?

Some of the top questions asked at the Reliance Industries Mechanical Graduate Engineer Trainee interview -

  1. Types of welding processes and testing technologies available. Also, they asked...read more
  2. Resume based interview but the questions were very de...read more

Tell us how to improve this page.

Reliance Industries Mechanical Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Maruti Suzuki Interview Questions
4.2
 • 585 Interviews
ITC Interview Questions
3.9
 • 545 Interviews
Tata Group Interview Questions
4.2
 • 358 Interviews
Shell Interview Questions
4.0
 • 189 Interviews
Adani Group Interview Questions
3.9
 • 187 Interviews
Bharat Petroleum Interview Questions
4.2
 • 148 Interviews
View all

Reliance Industries Mechanical Graduate Engineer Trainee Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

5.0

Job security

4.0

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Manager
3.4k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Executive
2.7k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
2.7k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
2.5k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
1.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Reliance Industries with

Tata Group

4.2
Compare

Adani Group

3.9
Compare

Hindustan Unilever

4.2
Compare

Bharti Enterprises

3.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview