Upload Button Icon Add office photos

Filter interviews by

Pye Power Equipment Interview Questions and Answers

Be the first one to contribute and help others!

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com

Round 1 - Technical 

(3 Questions)

  • Q1. What about Lubrication system & its components?
  • Ans. 

    The lubrication system is responsible for reducing friction between moving parts in an engine by providing oil to various components.

    • The main components of a lubrication system include the oil pump, oil filter, oil pan, and oil passages.

    • The oil pump is responsible for circulating oil through the engine to lubricate moving parts.

    • The oil filter helps remove contaminants from the oil to prevent damage to engine components...

  • Answered by AI
  • Q2. How do you diagnosis when vehicle came from overheating concern?
  • Ans. 

    Diagnosing vehicle overheating concerns involves checking coolant levels, radiator condition, thermostat, and fan operation.

    • Check coolant levels to ensure there is enough fluid to regulate engine temperature

    • Inspect radiator for leaks or blockages that may be causing overheating

    • Test thermostat to see if it is opening and closing properly

    • Verify fan operation to ensure it is cooling the engine effectively

  • Answered by AI
  • Q3. What process follow for diagnosis any vehicle?
  • Ans. 

    Diagnosing a vehicle involves a systematic process of identifying and troubleshooting issues.

    • Start by gathering information from the driver about any symptoms or issues they have noticed

    • Perform a visual inspection of the vehicle to look for obvious signs of damage or wear

    • Use diagnostic tools such as OBD scanners to read error codes and identify specific issues

    • Test drive the vehicle to observe any unusual behavior or no...

  • Answered by AI
Round 2 - Technical 

(5 Questions)

  • Q1. What is ADAS & it's Levels
  • Ans. 

    ADAS stands for Advanced Driver Assistance Systems. It refers to a set of safety features and technologies designed to assist drivers in the driving process.

    • ADAS includes features like adaptive cruise control, lane departure warning, automatic emergency braking, and blind spot monitoring.

    • There are different levels of ADAS ranging from Level 0 (no automation) to Level 5 (full automation).

    • Each level represents the extent...

  • Answered by AI
  • Q2. What is differential & Transfer case, 4*4?
  • Ans. 

    Differential & Transfer case are components of a 4*4 system in vehicles, allowing power to be distributed between front and rear wheels for better traction.

    • Differential is a gear system that allows wheels to rotate at different speeds, necessary for turning

    • Transfer case is a gearbox that distributes power from the transmission to both front and rear axles in a 4*4 vehicle

    • 4*4 system provides better traction and stab...

  • Answered by AI
  • Q3. Aware about Connected car feathers?
  • Ans. 

    Connected car features refer to technology that allows vehicles to communicate with each other and with external systems for improved safety, efficiency, and convenience.

    • Real-time traffic updates

    • Remote vehicle diagnostics

    • Automatic emergency calling (eCall)

    • Vehicle-to-vehicle communication

    • Integration with smartphones for navigation and entertainment

  • Answered by AI
  • Q4. Types of Transmission use in current & pls explain?
  • Ans. 

    Types of transmission include manual, automatic, CVT, DCT, and AMT.

    • Manual transmission requires the driver to manually shift gears using a clutch pedal and gear stick.

    • Automatic transmission shifts gears automatically without the need for manual input.

    • CVT (Continuously Variable Transmission) uses a belt and pulley system to provide seamless gear shifts.

    • DCT (Dual Clutch Transmission) uses two separate clutches for faster...

  • Answered by AI
  • Q5. What about EV & it's Technology?
  • Ans. 

    EV technology refers to electric vehicles and their associated technologies, such as batteries and charging infrastructure.

    • EV technology is rapidly advancing, with improvements in battery technology leading to longer range and faster charging times.

    • Charging infrastructure is expanding to support the growing number of EVs on the road, including fast chargers and wireless charging options.

    • EVs offer environmental benefits...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. Explain what do you understand about Automobile?
  • Ans. 

    Automobile refers to a vehicle designed for transportation, typically with four wheels and powered by an internal combustion engine.

    • Automobiles are commonly used for personal transportation, commuting, and delivery of goods.

    • They come in various types such as cars, trucks, buses, and motorcycles.

    • Automobiles have evolved over time with advancements in technology, safety features, and fuel efficiency.

    • Examples of automobil...

  • Answered by AI
  • Q2. Explain when press the clutch pedal in manual transmission?
  • Ans. 

    Pressing the clutch pedal in a manual transmission disengages the engine from the wheels, allowing for gear changes.

    • Press the clutch pedal when shifting gears

    • Press the clutch pedal when coming to a stop

    • Press the clutch pedal when starting the vehicle

    • Press the clutch pedal when reversing

    • Press the clutch pedal when the vehicle is stationary

  • Answered by AI
  • Q3. Explain auto transmission solenoids ?
  • Ans. 

    Auto transmission solenoids are electrical components that control the flow of transmission fluid to engage different gears in an automatic transmission system.

    • Auto transmission solenoids are electromechanical valves that open and close to regulate the flow of transmission fluid.

    • They are controlled by the vehicle's computer system to engage different gears based on driving conditions.

    • Common types of auto transmission s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on your work & preparation related to job profile will you get...
All the very best...
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Nov 2024. There were 4 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Proper system in working candidates.
  • Q2. Management in supported in department
  • Ans. 

    Management is fully supported in the department, providing resources and guidance to ensure success.

    • Management provides clear goals and expectations for the team

    • Regular check-ins and feedback sessions are conducted to support employee growth

    • Resources such as training programs and tools are readily available for employees

    • Management encourages open communication and collaboration among team members

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Payment terms and condition
  • Q2. How many facilities in company provide
Round 3 - Technical 

(2 Questions)

  • Q1. My working in good culture company.
  • Q2. I achieve from zero goal in my target
Round 4 - Technical 

(2 Questions)

  • Q1. Good man for handing
  • Q2. My working in plant maintenance manager work

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Maintenance Manager interview:
  • Dyes
  • TS 16949
Interview preparation tips for other job seekers - My knowledge for conventional machines CNC machine ,PLC machines, robot with, automation machines, maintenance breakdown, documentations, good manpower handling, pm schedule 52 week. Management support team work development and design support knowledge.

Deputy Regional Planning Manager Interview Questions & Answers

Shapoorji Pallonji Group user image Anonymous

posted on 7 Dec 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Naukri.com

Round 1 - Technical 

(10 Questions)

  • Q1. Brief about your education, career, previous projects handled, and role & responsibility in past organisations?
  • Q2. Current roles & responsibilities and value addition done by you and your team?
  • Q3. Process flow for planning throughout project life-cycle?
  • Q4. Critical/concerning areas to be monitored?
  • Q5. Productivity and permissible material wastage, process to prepare material reconciliation?
  • Q6. Understanding about claim and type of claim raised/supported to raise in past experience?
  • Q7. Experience of technical aspects and planning assessment required at tendering stage, capabilities to prepare tender submittals and proving insights to management on same?
  • Q8. Necessity of providing PMO support to management?
  • Q9. Understanding about role & responsibility of regional planning manager?
  • Q10. MIS and type of reports prepared in past and their significance for Top managemennt?
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Transmission Tower Detailing
  • Q2. Shop Drawing Bil of Meterial Tower Devlop & Re Devlop
  • Q3. Raice Chimney Drawing
  • Q4. Stub Template Prop Drawing
  • Q5. Structural Develop and Redevelop, Marking Erection Drawing , Bolts Nuts Grip Checking and Counting, Bill of Material , Shop Drawing Cad & Dxf and Shop Drawing Checking , Prop Drawing, Raise Chimney Transm...

Interview Preparation Tips

Interview preparation tips for other job seekers - Transmission Tower Detailing Shop Drawing Bill Of Meterial Tower Devlop & Re Devlop, RC, Prop
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. How to verify car is Major accidental
  • Ans. 

    To verify if a car is major accidental, check for signs of extensive damage and repair work.

    • Look for mismatched paint or panels indicating repair work

    • Check for signs of frame damage or structural issues

    • Inspect for any airbag deployment or replacement

    • Review the vehicle history report for any past accidents

    • Consult with a professional mechanic or body shop for a thorough inspection

  • Answered by AI
  • Q2. How to check apron replace
  • Ans. 

    To check apron replace, inspect for wear and tear, measure thickness, check for cracks or damage, and ensure proper alignment.

    • Inspect apron for wear and tear

    • Measure thickness of apron material

    • Check for cracks or damage on the apron

    • Ensure proper alignment of the apron

  • Answered by AI
  • Q3. 1 check car piller roboting punching are proper visible aur not than confirm car are accidental aur not ..
  • Q4. Check apron replace1 point check apron selent are are original and 2 roboting punching than confirm apron replace ya repair..
  • Q5. Check uppar member lower member radiator support both side legs apron col top head light support than confirm car is Major accidental aur not ..

Interview Preparation Tips

Interview preparation tips for other job seekers - Verify the car is accidental to 1 point check body structure parts like piller roof and boot floor and upar cross member lower cross member and radiator support and both side legs than confirm car are major accidental aur not ..
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - One-on-one 

(3 Questions)

  • Q1. DM PANTS mechanical
  • Q2. ITI fitter technician
  • Q3. All pumps dmPLANT operator
Round 2 - One-on-one 

(2 Questions)

  • Q1. All pumps dm panlant
  • Q2. DM PANTS mechanical engineer working

Interview Preparation Tips

Interview preparation tips for other job seekers - Fitter technician working
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at All India Institute of Management Studies and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Technology making ours less human ( 15 min) online

Round 2 - Technical 

(5 Questions)

  • Q1. Tell me about yourself
  • Q2. Tell me about you inters hip
  • Q3. Fixed assets with example
  • Ans. 

    Fixed assets are long-term tangible assets that are used in the production of goods or services and are not intended for sale.

    • Fixed assets are physical assets such as buildings, machinery, equipment, vehicles, and land.

    • They are not intended for sale and are used for the production of goods or services over a long period of time.

    • Examples of fixed assets include manufacturing plants, office buildings, delivery trucks, an

  • Answered by AI
  • Q4. Capital assets with example
  • Ans. 

    Capital assets are long-term assets that are used in the production of goods or services and are not easily converted into cash.

    • Capital assets are typically tangible assets such as buildings, machinery, equipment, and vehicles.

    • They are used by a company to generate revenue over an extended period of time.

    • Examples of capital assets include manufacturing plants, delivery trucks, office furniture, and computer systems.

  • Answered by AI
  • Q5. Why we use current ration
  • Ans. 

    Current ratio is used to assess a company's ability to pay its short-term obligations with its short-term assets.

    • Current ratio is a liquidity ratio that measures a company's ability to cover its short-term liabilities with its short-term assets.

    • It is calculated by dividing current assets by current liabilities.

    • A current ratio of 1 or higher is generally considered healthy, as it indicates that a company has enough curr...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - In Group discission try to speak as long as you can because there are giving one change to speak.
All the rounds are online.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. What is Parameter of micrometer
  • Ans. 

    The parameter of a micrometer is the scale on the sleeve that is used to measure the distance between the anvil and the spindle.

    • The parameter is typically marked in millimeters or inches, depending on the unit of measurement of the micrometer.

    • It is used to read the measurement accurately by aligning it with the thimble scale on the micrometer.

    • The parameter can be adjusted to zero when the anvil and spindle are in conta...

  • Answered by AI
  • Q2. How Types of steel
  • Ans. 

    There are various types of steel used in manufacturing, each with different properties and applications.

    • Carbon steel: most common type, contains varying amounts of carbon

    • Alloy steel: contains additional elements like manganese, nickel, or chromium for improved strength and durability

    • Stainless steel: contains chromium for corrosion resistance

    • Tool steel: used for making tools due to high hardness and wear resistance

  • Answered by AI
  • Q3. Tell me about your something
  • Ans. 

    My experience working as a supply chain management assistant in a fast-paced environment.

    • Managed inventory levels to ensure timely delivery of products

    • Assisted in coordinating shipments and tracking orders

    • Collaborated with vendors to negotiate pricing and terms

    • Utilized ERP systems to input and analyze data

    • Implemented process improvements to increase efficiency

  • Answered by AI
  • Q4. What you learn the technical course of computer
  • Ans. 

    I learned various technical skills in computer courses, including programming languages, database management, and networking.

    • Studied programming languages such as Java, C++, and Python

    • Learned about database management systems like MySQL and Oracle

    • Understood networking concepts such as TCP/IP, routing, and switching

  • Answered by AI
  • Q5. Howmany days your joining time
  • Ans. 

    My joining time is 30 days.

    • My joining time is 30 days from the date of offer acceptance.

    • I will need to complete all necessary paperwork and clearances within this time frame.

    • This allows me to wrap up my current responsibilities and transition smoothly into the new role.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Nov 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Job kha pa ha
  • Q2. Job kha pa ha
Round 2 - Technical 

(2 Questions)

  • Q1. Machine and tachanical
  • Q2. Machine and tachanical
Round 3 - One-on-one 

(2 Questions)

  • Q1. Engine and gear
  • Q2. Engi

Interview Preparation Tips

Interview preparation tips for other job seekers - Machine and tachanical
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
Not Selected
Round 1 - Technical 

(5 Questions)

  • Q1. How to check the pattern in all files in current directory
  • Ans. 

    Use grep command to check pattern in all files in current directory

    • Use 'grep' command with the desired pattern and '*' wildcard to search for the pattern in all files in the current directory

    • For example, to search for the pattern 'example' in all files in the current directory: grep 'example' *

  • Answered by AI
  • Q2. What is multistage pipeline in Jenkins
  • Ans. 

    Multistage pipeline in Jenkins allows for defining complex build pipelines with multiple stages and actions.

    • Multistage pipeline is defined in a Jenkinsfile using declarative syntax

    • Each stage in the pipeline represents a specific part of the build process

    • Stages can have multiple steps like build, test, deploy, etc.

    • Parallel stages can be defined to run multiple tasks concurrently

    • Post actions can be defined to execute tas

  • Answered by AI
  • Q3. Write a shell script to display current proceess with only process id
  • Ans. 

    Shell script to display current process with only process id

    • Use the 'ps' command to list all processes

    • Pipe the output to 'awk' to print only the process id column

    • Exclude the header line from the output

  • Answered by AI
  • Q4. How to clean the Jenkins workspace after every build
  • Ans. 

    Use Jenkins Pipeline to clean workspace after each build

    • Add a post-build step in Jenkins Pipeline to delete workspace contents

    • Use 'deleteDir()' command in Jenkins Pipeline to remove workspace directory

    • Consider using 'sh' or 'bat' commands to execute shell or batch scripts for cleaning workspace

  • Answered by AI
  • Q5. Can you tell me how to check the memory and storage in Linux
  • Ans. 

    To check memory and storage in Linux, you can use commands like free, df, and du.

    • Use 'free' command to check memory usage and available memory

    • Use 'df' command to check disk space usage

    • Use 'du' command to check disk usage of specific directories

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on shell scripting

Skills evaluated in this interview

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 808 Interviews
Bosch Interview Questions
4.2
 • 325 Interviews
CARS24 Interview Questions
3.6
 • 311 Interviews
KEC International Interview Questions
4.1
 • 286 Interviews
S&P Global Interview Questions
4.2
 • 261 Interviews
JBM Group Interview Questions
4.0
 • 247 Interviews
View all

Pye Power Equipment Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-Life balance

4.0

Salary & Benefits

5.0

Job Security

5.0

Company culture

5.0

Promotions/Appraisal

5.0

Work Satisfaction

Explore 1 Review and Rating
Compare Pye Power Equipment with

Larsen & Toubro Limited

4.0
Compare

Mahindra & Mahindra

4.1
Compare

Tata Steel

4.1
Compare

Shapoorji Pallonji Group

4.2
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview