Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Mar 2022. There were 3 interview rounds.
The weight of cement and steel required depends on the project specifications and design.
The weight of cement and steel needed varies based on the size and scope of the project.
The type of cement and steel used also affects the weight required.
The design and structural requirements of the project determine the amount of cement and steel needed.
Calculations are done by the structural engineer to determine the exact weig
Calculating concrete involves determining the amount of materials needed for a specific project.
Determine the volume of concrete needed
Calculate the amount of cement, sand, and aggregate required
Consider the water-cement ratio
Factor in any additives or admixtures
Account for waste and spillage
The plan of giving refers to a detailed outline of how donations or contributions will be collected and distributed.
The plan should include specific goals and objectives for the giving campaign.
It should outline the target audience and how they will be reached.
The plan should also detail the types of donations that will be accepted and how they will be collected.
It should include a budget and timeline for the campaign.
...
I applied via Walk-in and was interviewed in May 2022. There were 2 interview rounds.
Construction material and techniques
Construction labour management
Site work
I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.
Penetration test is a method of evaluating the security of a computer system or network by simulating an attack from a malicious source.
Penetration test involves identifying vulnerabilities in a system or network.
It includes attempting to exploit these vulnerabilities to determine the potential impact of a real attack.
The goal of a penetration test is to strengthen the security defenses of the system or network.
Common ...
Waterproofing is a process of making a structure or material resistant to the penetration of water.
Waterproofing involves applying materials or coatings to prevent water from seeping through surfaces.
It is commonly used in construction to protect buildings from water damage.
Examples of waterproofing materials include bituminous coatings, cementitious waterproofing, and liquid membrane systems.
Types of foundation include shallow, deep, and pile foundations.
Shallow foundations are used when the soil is strong enough to support the structure's weight, such as spread footings and mat foundations.
Deep foundations are used when the soil is weak and unable to support the structure's weight, such as pile foundations and drilled piers.
Pile foundations are deep foundations that consist of long, slender columns driven...
The thickness of compreg ply varies depending on its intended use and application. Its size can also vary depending on the manufacturer and customer requirements.
The thickness of compreg ply can range from 3mm to 25mm or more
The size of compreg ply can vary from 4ft x 8ft to 5ft x 10ft or more
The thickness and size of compreg ply can be customized based on the specific requirements of the project
Compreg ply is commonly...
The maximum repetition of ply shuttering depends on various factors such as quality of ply, weather conditions, and type of concrete.
The maximum repetition of ply shuttering can range from 5 to 20 times depending on the above factors.
If the quality of ply is good and weather conditions are favorable, the ply shuttering can be reused more number of times.
However, if the concrete mix is harsh or the weather conditions ar...
The consumption of shuttering oil per liter depends on the area covered.
The consumption of shuttering oil per liter can vary depending on factors such as the type of shuttering material, surface texture, and weather conditions.
On average, 1 liter of shuttering oil can cover approximately 10-15 square meters of surface area.
However, this can vary significantly based on the absorbency of the surface and the thickness of ...
The elongation % of fe550 steel varies depending on the specific grade and manufacturing process.
The elongation % of fe550 steel can range from 14% to 20%.
It is important to refer to the specifications provided by the manufacturer for accurate information.
The elongation % indicates the ability of the steel to deform before breaking under tension.
Fe550 steel is commonly used in construction and reinforcement application
Rolling margin of steel is the difference between the target thickness and the actual thickness after rolling.
Rolling margin is a measure of the accuracy of the rolling process.
It is calculated by subtracting the actual thickness of the steel after rolling from the target thickness.
A positive rolling margin means the steel is thicker than intended, while a negative rolling margin means it is thinner.
Rolling margin is i...
The density of cement is around 1440 kg/m³.
The density of cement varies depending on the type of cement.
The density of Portland cement is around 1440 kg/m³.
The density of lightweight cement is around 1000 kg/m³.
The density of high-density cement is around 3000 kg/m³.
Clear cover in column refers to the distance between the surface of the reinforcement and the outer surface of the concrete.
Clear cover is important to protect the reinforcement from corrosion and to ensure proper bonding between the reinforcement and concrete.
The required clear cover for columns depends on factors such as the type of structure, exposure conditions, and size of the reinforcement.
For example, in a coast...
Bending moment formula calculates the internal bending moment in a beam or structure.
Bending moment formula is M = F * d
M is the bending moment, F is the force applied, and d is the distance from the force to the point of interest
Bending moment can be positive or negative depending on the direction of the force and the orientation of the beam
Bending moment is an important factor in designing and analyzing structures
I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.
Mivan formwork is a construction technique that uses aluminum formwork system for casting concrete structures.
Mivan formwork involves setting up aluminum formwork panels, fixing reinforcement bars, pouring concrete, and removing the formwork after the concrete has set.
It is a fast and efficient construction method commonly used for high-rise buildings and large residential projects.
The system allows for smooth finishes...
posted on 14 Oct 2023
I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.
Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.
Variations are changes to the original scope, cost, or schedule of a project
Variations must be documented and approved by the relevant parties
The impact of variations on project budget and timeline must be analyzed
Examples of variations include design changes, unforeseen site conditions, and client requests
I applied via Approached by Company and was interviewed in Apr 2022. There was 1 interview round.
I applied via LinkedIn and was interviewed in Feb 2022. There were 2 interview rounds.
I am a civil engineer with experience in designing and managing construction projects.
I have a Bachelor's degree in Civil Engineering from XYZ University.
I have worked on various projects including designing bridges, roads, and buildings.
I am skilled in using software such as AutoCAD and Revit for designing.
I have experience in managing construction projects and ensuring they are completed on time and within budget.
I a...
based on 3 reviews
Rating in categories
Civil Site Engineer
9
salaries
| ₹1.9 L/yr - ₹3.6 L/yr |
Senior Electrical Engineer
6
salaries
| ₹3.6 L/yr - ₹5.6 L/yr |
Project Manager
5
salaries
| ₹7.8 L/yr - ₹22 L/yr |
Project Engineer
4
salaries
| ₹2 L/yr - ₹5.1 L/yr |
Store Incharge
4
salaries
| ₹3.7 L/yr - ₹4.5 L/yr |
Lea Associates South Asia
McNally Bharat Engineering
R.V.R. PROJECTS
ABCI Infrastructures