Upload Button Icon Add office photos

Filter interviews by

Project Engineering Services Senior Engineer Interview Questions and Answers

Updated 29 Feb 2024

Project Engineering Services Senior Engineer Interview Experiences

1 interview found

Senior Engineer Interview Questions & Answers

user image Nitesh Kumar

posted on 29 Feb 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Aug 2023.

Round 1 - Technical 

(3 Questions)

  • Q1. What is WFGD and its working process?
  • Ans. 

    WFGD stands for Wet Flue Gas Desulfurization. It is a process used to remove sulfur dioxide from exhaust flue gases of fossil-fuel power plants.

    • WFGD uses a wet scrubbing process to remove sulfur dioxide from flue gas.

    • The process involves spraying a slurry of limestone or lime into the flue gas to react with sulfur dioxide and form calcium sulfite or sulfate.

    • The calcium sulfite or sulfate is then removed as a solid wast...

  • Answered by AI
  • Q2. How to erection a material and what's safety measures?
  • Ans. 

    To erect a material, proper planning, equipment, and safety measures are essential.

    • Plan the erection process in advance to ensure efficiency and safety.

    • Use appropriate equipment and tools for lifting and positioning the material.

    • Ensure all workers involved are trained in proper handling techniques and safety procedures.

    • Inspect the material for any defects or damage before erection to prevent accidents.

    • Implement safety ...

  • Answered by AI
  • Q3. Safety and quality related.
Round 2 - HR 

(2 Questions)

  • Q1. Profile details
  • Q2. What is current CTC and expected CTC?
  • Ans. 

    Current CTC is X and expected CTC is Y.

    • Current CTC is the salary you are currently earning in your current job.

    • Expected CTC is the salary you are looking to earn in the new position.

    • It is important to be honest and realistic about your salary expectations.

    • You can mention any additional benefits or perks you are looking for in the new role.

    • For example, Current CTC is 10 LPA and expected CTC is 15 LPA.

  • Answered by AI

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(3 Questions)

  • Q1. Basic engineering questions
  • Q2. Air valve locations
  • Q3. Pump house related questions
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Last company information Family background
  • Ans. 

    I worked at XYZ Company as a Senior Engineer. My family background includes a mix of professionals and entrepreneurs.

    • Worked at XYZ Company as a Senior Engineer

    • Family background includes professionals and entrepreneurs

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Codes Excel Autocad Drawing reading
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Execution of Elevated Viaduct (ROB) 6.2KM 1200 numbers pile (Friction & end Bearing Pile) Foundation ROB Pile Cap and Pier, PSC T-Type Pier Cap, Post Tensioning Girder,Bow string (ROB) structure box interc...
  • Ans. 

    The execution of an elevated viaduct involves various tasks such as pile foundation, pier construction, post-tensioning girders, and bridge structures.

    • Tasks include pile foundation construction for the viaduct, pier construction for support, post-tensioning of girders for strength, and bridge structure assembly.

    • Activities also involve conducting load tests, NDT tests, deflection tests, and steel reconciliation for qual...

  • Answered by AI
  • Q2. Preparation of the planning of site execution day by day as per available drawing. Planning & indenting daily requirement of Labour, Construction Machinery, and Materials &Formwork. Organizing various dail...

Interview Preparation Tips

Interview preparation tips for other job seekers - I certify also that all relative document pertaining my qualifications areon my file and is readily accessible in the case needed further.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - One-on-one 

(6 Questions)

  • Q1. What is project safety, why is it important ?
  • Ans. 

    Project safety refers to the measures and protocols put in place to ensure the well-being and protection of individuals involved in a project.

    • Ensures the physical and mental well-being of workers and stakeholders

    • Reduces the risk of accidents, injuries, and fatalities

    • Compliance with safety regulations and standards

    • Enhances productivity and efficiency by minimizing disruptions

    • Builds trust and reputation with clients and ...

  • Answered by AI
  • Q2. What Is project scheduling?
  • Ans. 

    Project scheduling is the process of creating a timeline for completing tasks and milestones within a project.

    • Identifying project tasks and their dependencies

    • Estimating the time required for each task

    • Sequencing tasks in the most efficient order

    • Assigning resources to tasks

    • Monitoring progress and adjusting the schedule as needed

  • Answered by AI
  • Q3. Fire case situation at project
  • Ans. 

    In a fire case situation at a project, it is crucial to follow safety protocols and evacuate all personnel immediately.

    • Ensure all personnel are aware of the emergency procedures and evacuation routes.

    • Contact emergency services and alert them of the situation.

    • Use fire extinguishers if safe to do so, but prioritize safety of personnel.

    • Account for all personnel after evacuation to ensure everyone is safe.

    • Investigate the c...

  • Answered by AI
  • Q4. Aggregates , Concrete grade
  • Q5. Project tools used before
  • Ans. 

    I have used project management tools such as Jira, Trello, and Asana in previous projects.

    • Jira

    • Trello

    • Asana

  • Answered by AI
  • Q6. What CAD tools have you used?
  • Ans. 

    I have experience using CAD tools such as AutoCAD, SolidWorks, and CATIA for designing and modeling.

    • AutoCAD

    • SolidWorks

    • CATIA

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It's a L&T BIS Interview
1. Asked about project safety
2. Project management
3. Btech project
4. Restoration
5. Fire safety scenario/case
6. Critical paths-CPM-related aspects

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Feb 2024. There were 4 interview rounds.

Round 1 - Group Discussion 

How to manage site structure to finishing work

Round 2 - Aptitude Test 

Technical/ mathematics

Round 3 - One-on-one 

(3 Questions)

  • Q1. About reinforcement
  • Q2. About tile testing
  • Q3. About material testing
Round 4 - HR 

(2 Questions)

  • Q1. Family background
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't give wrong statements and provide all documents is original
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Nvh basics,modal analysis
Round 2 - Technical 

(1 Question)

  • Q1. Nvh basics,modal analysis,spring mass damper

Interview Preparation Tips

Interview preparation tips for other job seekers - You can able to explain what u have done in earlier company. Prepare basics and be confident
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. What is test procedure for Cement and steel and coarse aggregate and sand?
  • Ans. 

    The test procedures for cement, steel, coarse aggregate, and sand involve various physical and chemical tests to ensure quality and suitability for construction purposes.

    • Cement: Tests include fineness, setting time, compressive strength, soundness, and chemical composition.

    • Steel: Tests involve tensile strength, yield strength, elongation, and chemical composition.

    • Coarse Aggregate: Tests include sieve analysis, specific...

  • Answered by AI
  • Q2. What is the grade using of concrete?
  • Ans. 

    The grade of concrete refers to its strength and durability.

    • Concrete is graded based on its compressive strength, measured in megapascals (MPa).

    • Common grades of concrete include M10, M15, M20, M25, etc.

    • The higher the grade, the stronger the concrete.

    • Different grades of concrete are used for different applications, such as foundations, slabs, columns, etc.

  • Answered by AI
  • Q3. What is the 28 days cube strength and value?
  • Ans. 

    28 days cube strength is a measure of the compressive strength of concrete after 28 days of curing.

    • 28 days cube strength refers to the compressive strength of concrete cubes after they have been cured for 28 days.

    • It is an important parameter to assess the quality and durability of concrete.

    • The value of 28 days cube strength is typically expressed in megapascals (MPa) or pounds per square inch (psi).

    • It is determined by ...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. What is your previous experience

Interview Preparation Tips

Topics to prepare for Kalpataru Projects International Senior Engineer interview:
  • Manual Testing
Interview preparation tips for other job seekers - Good hard work
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. What is Surging?
  • Ans. 

    Surging is a phenomenon in which a system experiences rapid and temporary increases in pressure or flow rate.

    • Surging can occur in various systems such as pipelines, compressors, pumps, and turbines.

    • It is often caused by sudden changes in demand, equipment malfunctions, or improper system design.

    • Surging can lead to damage to equipment, reduced efficiency, and safety hazards.

    • Examples include water hammer in pipelines and

  • Answered by AI
  • Q2. What is Froude No?
  • Ans. 

    Froude number is a dimensionless number used to quantify the influence of gravity on fluid flow.

    • Froude number is defined as the ratio of inertia force to gravitational force in a fluid flow.

    • It is used to determine the type of flow (subcritical, critical, or supercritical) in open channel flow.

    • Froude number is calculated as Fr = V / sqrt(g * d), where V is velocity, g is acceleration due to gravity, and d is depth of fl

  • Answered by AI
  • Q3. What is Weeping?
  • Ans. 

    Weeping is the process of fluid leaking out of a solid material, often due to damage or excess moisture.

    • Weeping can occur in materials such as wood, concrete, and metal.

    • It is often a sign of structural damage or deterioration.

    • Examples include water weeping from a crack in a wall or oil weeping from a car engine.

    • Weeping can also refer to the shedding of tears in humans and animals.

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Draw basic PFD of a WTP plant including feed quality and all the sensors.
  • Ans. 

    A basic PFD of a WTP plant including feed quality and sensors.

    • Include feed quality parameters such as turbidity, pH, temperature, and flow rate

    • Include sensors for monitoring parameters like chlorine levels, pressure, and conductivity

    • Show the flow of water through various treatment processes like coagulation, flocculation, sedimentation, filtration, and disinfection

  • Answered by AI
  • Q2. What are the process checks done in Line testing of a 6inch dia pigging line including the calculations involved?
  • Ans. 

    Process checks in line testing of a 6inch dia pigging line and associated calculations

    • Pressure testing to ensure integrity of the line

    • Flow testing to check for blockages or restrictions

    • Calibration of pigging equipment for accurate results

    • Calculations involve pressure drop, flow rate, and pigging efficiency

    • Recording and analyzing data for future reference

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Why do u qant to leave ur previous company?
  • Q2. How do u solve a matter of conflict during a Project meeting?
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Experience, salary discussion and communication skill check
Round 2 - Technical 

(1 Question)

  • Q1. Experience based questions

Project Engineering Services Interview FAQs

How many rounds are there in Project Engineering Services Senior Engineer interview?
Project Engineering Services interview process usually has 2 rounds. The most common rounds in the Project Engineering Services interview process are HR and Technical.
What are the top questions asked in Project Engineering Services Senior Engineer interview?

Some of the top questions asked at the Project Engineering Services Senior Engineer interview -

  1. How to erection a material and what's safety measur...read more
  2. What is WFGD and its working proce...read more
  3. What is current CTC and expected C...read more

Tell us how to improve this page.

Project Engineering Services Senior Engineer Salary
based on 4 salaries
₹4.5 L/yr - ₹10.5 L/yr
16% less than the average Senior Engineer Salary in India
View more details
Project Engineer
17 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Electrical Engineer
7 salaries
unlock blur

₹2 L/yr - ₹4.8 L/yr

Civil Site Engineer
5 salaries
unlock blur

₹3 L/yr - ₹5 L/yr

Site Engineer
5 salaries
unlock blur

₹2.4 L/yr - ₹5.5 L/yr

Utility & Maintenance Engineer
4 salaries
unlock blur

₹3 L/yr - ₹5 L/yr

Explore more salaries
Compare Project Engineering Services with

Larsen & Toubro Limited

4.0
Compare

L&T Construction

4.0
Compare

Tata Projects

4.3
Compare

Megha Engineering & Infrastructures

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview