Upload Button Icon Add office photos

Power Mech Projects

Compare button icon Compare button icon Compare

Filter interviews by

Power Mech Projects Senior Technician Interview Questions and Answers

Updated 15 Mar 2024

Power Mech Projects Senior Technician Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is ohm's law
  • Ans. 

    Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance of the conductor.

    • Ohm's law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.

    • It helps in calculating the current, voltage, or resistance in a circuit when the other two values are known.

    • For example, if a circuit has a volt...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Trafo and breaker (HT and LT) and switchyard maintenance.
  • Q2. Control wiring and power wiring and star delta and DG operation.
  • Q3. LBDS Operation and VCB maintenance

Interview Preparation Tips

Topics to prepare for Power Mech Projects Senior Technician interview:
  • Power Plant
  • Power System
Interview preparation tips for other job seekers - Prepare this type of question.

Senior Technician Interview Questions Asked at Other Companies

asked in Dell
Q1. What would you do if the computer is turned off and doesn’t turn ... read more
asked in JSW Cement
Q2. What are the Electrical fault occurs in the motor
Q3. Transformers working principle and what is power factor
asked in Tata Motors
Q4. What is the bore? What is the transmission? What is engine increa ... read more
Q5. What lubricant oil is used in hydraulic system and what grade oil ... read more

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. Opration Maintenance se related questions kr skte h ji
  • Q2. Opration Maintenance se related koi question put up kr skte h ji
  • Q3. CNG operation maintenance
  • Q4. Opration Maintenance gas

Interview Preparation Tips

Interview preparation tips for other job seekers - Life is good

I applied via Naukri.com and was interviewed in Feb 2021. There were 2 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Welding, qc, daily activities
  • Q2. Ndt test, valve industry

Interview Preparation Tips

Interview preparation tips for other job seekers - Little knowledge required but confidence is important

Interview Questionnaire 

3 Questions

  • Q1. What is android architecture stack?
  • Q2. What is AIDL?
  • Ans. 

    AIDL stands for Android Interface Definition Language, used for inter-process communication in Android.

    • AIDL is used to define the interface between client and service in Android.

    • It allows communication between different processes in Android.

    • AIDL is used to pass complex data types between processes.

    • AIDL is similar to Remote Procedure Call (RPC) in other programming languages.

    • Example: AIDL is used in Android to implement...

  • Answered by AI
  • Q3. What is hash set and hash map
  • Ans. 

    Hash set and hash map are data structures used to store key-value pairs for efficient retrieval.

    • Hash set stores unique values without any specific order.

    • Hash map stores key-value pairs and allows fast retrieval of values based on keys.

    • Both use hashing to map keys to their corresponding values.

    • In Java, HashSet and HashMap are implementations of these data structures.

  • Answered by AI

Skills evaluated in this interview

I applied via Naukri.com and was interviewed in Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Can you work in rural place

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't fear too much even the minimum guy can get through

Interview Questionnaire 

1 Question

  • Q1. What is your role in previous company

I applied via Company Website and was interviewed before Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Load distribution under rigid and flexible footings,water tank design, steel foundation design
  • Q2. Mix design of concrete, btech project
  • Ans. 

    Mix design of concrete and BTech project

    • Mix design involves determining the proportions of cement, water, aggregates, and admixtures to achieve desired properties of concrete

    • Factors like strength, workability, durability, and cost are considered while designing the mix

    • BTech project can involve studying the effect of different mix designs on properties of concrete or developing a new mix design

    • Examples of BTech projects...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be well prepared with basics and if you are already experienced, be prepared with site knowledge

Interview Questionnaire 

3 Questions

  • Q1. How many time u take any update shuttering system?
  • Ans. 

    The question is unclear and lacks context.

    • Please provide more information about the 'update shuttering system'.

    • Specify the time frame for the updates.

    • Clarify the purpose or objective of the updates.

    • Provide any relevant examples or scenarios.

  • Answered by AI
  • Q2. Why u want to work as a execution engineer? Why not any special team such as formwork team,or quality team?
  • Ans. 

    I want to work as an execution engineer because I enjoy the challenge of overseeing and coordinating all aspects of a project.

    • As an execution engineer, I would have the opportunity to work on a variety of projects and oversee all aspects of their execution.

    • I enjoy the challenge of coordinating different teams and ensuring that everything runs smoothly.

    • While working on a formwork or quality team would be valuable experi...

  • Answered by AI
  • Q3. As contractor farm Engineer in RCC which is most important? 1) Reinforcements 2)Formwork 3)Concrete And why?
  • Ans. 

    Concrete is the most important as it provides the strength and durability to the structure.

    • Concrete is the backbone of any RCC structure.

    • It provides the strength and durability to the structure.

    • Reinforcements and formwork are important too, but without concrete, they are useless.

    • Proper mix design and curing of concrete are crucial for the longevity of the structure.

  • Answered by AI

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Related to girder,segment,pier,pier table

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge about ur own work u worked recently

Power Mech Projects Interview FAQs

How many rounds are there in Power Mech Projects Senior Technician interview?
Power Mech Projects interview process usually has 1-2 rounds. The most common rounds in the Power Mech Projects interview process are Technical and Resume Shortlist.
What are the top questions asked in Power Mech Projects Senior Technician interview?

Some of the top questions asked at the Power Mech Projects Senior Technician interview -

  1. What is ohm's ...read more
  2. Control wiring and power wiring and star delta and DG operati...read more
  3. Trafo and breaker (HT and LT) and switchyard maintenan...read more

Tell us how to improve this page.

Power Mech Projects Senior Technician Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 750 Interviews
Tata Projects Interview Questions
4.2
 • 445 Interviews
TCE Interview Questions
3.8
 • 251 Interviews
Saint-Gobain Interview Questions
4.0
 • 173 Interviews
View all
Power Mech Projects Senior Technician Salary
based on 25 salaries
₹2.3 L/yr - ₹4.8 L/yr
21% less than the average Senior Technician Salary in India
View more details

Power Mech Projects Senior Technician Reviews and Ratings

based on 9 reviews

3.6/5

Rating in categories

3.1

Skill development

3.2

Work-life balance

2.6

Salary

3.0

Job security

3.0

Company culture

1.4

Promotions

2.2

Work satisfaction

Explore 9 Reviews and Ratings
Senior Engineer
407 salaries
unlock blur

₹2.4 L/yr - ₹8.4 L/yr

Assistant Manager
393 salaries
unlock blur

₹4 L/yr - ₹11 L/yr

Engineer
327 salaries
unlock blur

₹2 L/yr - ₹7 L/yr

Electrical Engineer
212 salaries
unlock blur

₹1.7 L/yr - ₹7 L/yr

Safety Officer
202 salaries
unlock blur

₹1.9 L/yr - ₹5.8 L/yr

Explore more salaries
Compare Power Mech Projects with

Larsen & Toubro Limited

3.9
Compare

L&T Construction

4.0
Compare

Megha Engineering & Infrastructures

3.9
Compare

Shapoorji Pallonji Group

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview