Filter interviews by
Top trending discussions
I applied via Company Website and was interviewed before Mar 2021. There were 2 interview rounds.
Good performance & technical answer
Pump Whay is a required pump for a specific application.
Pump Whay is likely a typo and should be corrected to 'Pump What'.
The required pump depends on the specific application and its requirements.
Examples of pump types include centrifugal pumps, diaphragm pumps, and gear pumps.
SOP stands for Standard Operating Procedure, which are established procedures to ensure consistency and quality in operations. Standard rules are guidelines that must be followed.
SOPs are detailed step-by-step instructions on how to perform a specific task or operation.
Standard rules are general guidelines or regulations that must be followed in a particular setting.
SOPs help in maintaining consistency, quality, and ef...
posted on 6 Aug 2024
I applied via campus placement at Harcourt Butler Technology Institute, Kanpur and was interviewed in Feb 2024. There were 3 interview rounds.
Basics technical and basic aptitude
posted on 19 Jun 2024
Fans are used to create airflow in a specific direction, while blowers are used to generate high-pressure airflow in a concentrated area.
Fans are typically used for cooling purposes in electronics or ventilation in buildings.
Blowers are commonly used in HVAC systems, industrial processes, and automotive applications.
Fans have lower pressure capabilities compared to blowers.
Blowers are more efficient in moving air over ...
Heat exchangers are devices used to transfer heat between two or more fluids.
Heat exchangers can be classified based on their construction (e.g. shell and tube, plate, finned tube)
Design considerations include fluid flow rates, temperature ranges, material selection, and pressure drop
Efficiency of heat exchangers can be improved by increasing surface area for heat transfer
Examples of heat exchangers include car radiato...
I applied via Campus Placement and was interviewed before Jul 2022. There were 4 interview rounds.
Its consist of general questions like maths reasoning
posted on 16 Mar 2022
I applied via Company Website and was interviewed before Mar 2021. There were 3 interview rounds.
Various types of pumps include centrifugal, positive displacement, axial flow, and jet pumps.
Centrifugal pumps use a rotating impeller to create a flow of fluid.
Positive displacement pumps move fluid by trapping a fixed amount and forcing it through the discharge port.
Axial flow pumps move fluid parallel to the pump shaft.
Jet pumps use a combination of pressure and suction to move fluid.
Other types of pumps include gea
The least count of vernier caliper is the smallest measurement that can be read on the scale.
The least count is determined by the number of divisions on the vernier scale and the main scale.
It is usually 0.1 mm or 0.02 mm for metric vernier calipers and 0.001 inch for imperial vernier calipers.
To determine the least count, subtract the value of one main scale division from the value of one vernier scale division.
For ex...
Micrometer screw gauge is used for higher precision measurements than vernier caliper.
Micrometer screw gauge has a higher accuracy of measurement than vernier caliper.
Micrometer screw gauge has a smaller least count than vernier caliper.
Micrometer screw gauge is used for measuring thickness, diameter, and depth of objects with high precision.
Vernier caliper is used for measuring length, width, and height of objects wit
During my internship, I faced difficulties in adapting to new software tools and collaborating with team members.
Adapting to new software tools: I had limited experience with certain software tools that were used in the internship. However, I took the initiative to learn them by attending online tutorials, seeking guidance from colleagues, and practicing on my own.
Collaborating with team members: Initially, I found it ...
Blower is used to move air or gas while compressor is used to compress air or gas.
Blower is used to create a high flow of air or gas at low pressure.
Compressor is used to compress air or gas to a higher pressure.
Blowers are used in HVAC systems, while compressors are used in refrigeration systems.
Blowers are used in industrial applications to move large volumes of air or gas.
Compressors are used in pneumatic tools like
Mechanical joints are used to connect two or more mechanical parts together. There are various types of joints and processes.
Welding joints - fusion welding, resistance welding, friction welding
Brazing joints - torch brazing, furnace brazing, induction brazing
Soldering joints - soft soldering, hard soldering
Mechanical joints - bolted joints, riveted joints, snap-fit joints
Adhesive joints - structural adhesive, pressure...
I would expect a competitive salary that reflects my qualifications and the responsibilities of the role.
Research the average salary range for Graduate Engineer Trainees in your industry and location.
Consider your level of experience, education, and any additional skills or certifications you bring to the role.
Take into account the responsibilities and expectations outlined in the job description.
Be prepared to negotia...
My family background is diverse and supportive.
My parents are both professionals in different fields.
I have two siblings, one older and one younger.
We come from a middle-class background and value education.
My family has always been supportive of my career choices.
We have a close-knit extended family and often gather for celebrations.
I worked as a Junior Engineer at XYZ Company.
Assisted senior engineers in designing and implementing projects
Conducted research and analysis to support engineering decisions
Collaborated with cross-functional teams to ensure project success
Prepared technical reports and documentation
Participated in on-site inspections and troubleshooting
Seeking new opportunities for professional growth and development.
Looking for a more challenging role
Want to broaden my skill set
Seeking better career prospects
Interested in working with a different industry or technology
Want to work in a more collaborative and innovative environment
I am a recent graduate with a degree in engineering, seeking a position as a Graduate Engineer Trainee.
Recent graduate with a degree in engineering
Seeking a position as a Graduate Engineer Trainee
Strong knowledge in [specific engineering field]
Experience with [relevant software/tools]
Completed internships at [company/organization]
Excellent problem-solving and analytical skills
posted on 16 Jun 2022
Reasoning
I applied via Campus Placement and was interviewed before Jan 2022. There were 4 interview rounds.
10 people in one group, topic drone technology
Modes of heat transfer include conduction, convection, and radiation.
Conduction is the transfer of heat through a material without any movement of the material itself.
Convection is the transfer of heat through the movement of fluids, such as air or water.
Radiation is the transfer of heat through electromagnetic waves, such as the heat from the sun.
Examples of conduction include touching a hot stove or holding a cold dr...
Design of distillation column involves determining the number of trays, column diameter, and feed location.
The number of trays is determined by the separation required and the reflux ratio.
Column diameter is determined by the vapor and liquid flow rates.
Feed location is determined by the composition of the feed and the desired product purity.
Other factors to consider include pressure drop, heat transfer, and material s...
Yes, I am willing to work in Jammu.
I am open to working in any location assigned to me
I am adaptable and can adjust to new environments
I am excited to explore new places and cultures
I have worked in different cities before and have had positive experiences
posted on 14 Oct 2022
I applied via Campus Placement and was interviewed in Apr 2022. There was 1 interview round.
Heat transfer is the process of thermal energy moving from one object or substance to another.
Heat transfer occurs through three main mechanisms: conduction, convection, and radiation.
Conduction is the transfer of heat through direct contact between objects or substances.
Convection is the transfer of heat through the movement of fluids or gases.
Radiation is the transfer of heat through electromagnetic waves.
Examples of...
Mass transfer is the movement of substances from one place to another due to a concentration gradient.
Mass transfer involves the transfer of mass or substances between phases, such as from a liquid to a gas or from a solid to a liquid.
It occurs due to differences in concentration, temperature, pressure, or other driving forces.
Examples of mass transfer include evaporation, condensation, absorption, distillation, and ex...
based on 1 interview
Interview experience
Production Supervisor
701
salaries
| ₹1.8 L/yr - ₹9.6 L/yr |
Executive
254
salaries
| ₹3 L/yr - ₹11.8 L/yr |
Supervisor
241
salaries
| ₹1.8 L/yr - ₹8.5 L/yr |
Research Scientist
223
salaries
| ₹5 L/yr - ₹12 L/yr |
Assistant Manager
144
salaries
| ₹6.7 L/yr - ₹22.5 L/yr |
Bayer Crop Science Vegetable Seeds
UPL
Syngenta
Coromandel International