Add office photos
Filter interviews by
Phil Group Interview Questions, Process, and Tips
Phil Group Interview Experiences
1 interview found
Selected
I applied via Newspaper Ad and was interviewed in Dec 2022. There were 2 interview rounds.
(9 Questions)
- Q1. Chemical consumption per ton of coal
- Ans.
Chemical consumption per ton of coal varies depending on the process and type of coal.
The chemical consumption can range from 0.5 to 10 kg per ton of coal.
The type of coal and the process used can affect the chemical consumption.
Common chemicals used include lime, caustic soda, and sulfuric acid.
Chemical consumption is typically higher in processes that involve coal washing or desulfurization.
Regular monitoring and opt...
- Q2. Magnetite powder used per ton
- Ans.
The amount of magnetite powder used per ton varies depending on the specific process and application.
The amount of magnetite powder used per ton can range from 100 to 1000 kilograms
The specific process and application will determine the amount of magnetite powder needed
For example, in the production of iron ore pellets, approximately 200 kilograms of magnetite powder is used per ton
- Q3. Pressure in heavy media pump
- Ans.
Pressure in heavy media pump is crucial for efficient operation.
Heavy media pumps require high pressure to move dense fluids like slurries and suspensions.
Pressure is created by the pump's impeller, which forces the fluid through the system.
The pressure must be carefully monitored and controlled to prevent damage to the pump and ensure optimal performance.
Factors that can affect pressure include the viscosity and densi...
- Q4. Capacity of washery with rotary braker capacity
- Ans.
The capacity of the washery depends on the capacity of the rotary breaker.
The capacity of the washery should be equal to or greater than the capacity of the rotary breaker.
The rotary breaker breaks the coal into smaller sizes, which are then processed in the washery.
The capacity of the rotary breaker can range from 100 to 2000 tons per hour depending on the size of the coal and the requirements of the customer.
- Q5. Coal matching with ash
- Ans.
Coal and ash should be matched to ensure efficient combustion and minimize environmental impact.
Matching coal with ash involves analyzing the chemical composition of both to determine the appropriate ratio for efficient combustion.
The ash content of coal can affect its heating value and combustion efficiency.
Matching coal with ash can also help minimize environmental impact by reducing emissions of pollutants such as s...
- Q6. Quality control of coal
- Ans.
Quality control of coal involves various tests and measures to ensure its purity and efficiency.
Coal samples are collected and analyzed for their chemical composition, moisture content, and ash content.
Various tests are conducted to determine the calorific value of coal, which is a measure of its energy content.
Coal is also tested for its sulfur content, which can have environmental implications.
Quality control measure...
- Q7. Reason of drop pressure in pump
- Ans.
Drop in pressure in pump can be caused by various factors.
Leakage in the pump or pipeline
Clogged suction or discharge lines
Air pockets in the pump or pipeline
Worn out impeller or casing
Incorrectly sized pump or motor
Low fluid level in the pump
High fluid viscosity
Excessive friction losses in the pipeline
- Q8. Water circuit layout used in washery
- Ans.
The water circuit layout in a washery is designed to efficiently recycle and reuse water for various processes.
The layout includes a series of settling ponds and tanks to remove impurities from the water.
Water is then treated with chemicals to remove any remaining impurities.
The treated water is then reused in various processes such as coal washing and dust suppression.
Effluent water is discharged after meeting the req...
- Q9. How much ash will be down after process in rotary braker
- Ans.
The amount of ash produced in a rotary breaker process depends on various factors.
The type and quality of coal being processed
The size and capacity of the rotary breaker
The speed and angle of the rotary breaker
The moisture content of the coal
The efficiency of the dust collection system
Typically, the ash content in coal ranges from 5-40%, so the amount of ash produced will vary accordingly
Interview Preparation Tips
Top Phil Group Process Head Interview Questions and Answers
Process Head Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
(2 Questions)
- Q1. "What are the key differences between continuous integration, continuous delivery, and continuous deployment in a Devops pipeline?
- Q2. Research the company culture before applying
Interview Preparation Tips
Software Developer Trainee Interview Questions & Answers
HyScaler
Abhijit Nanda
posted on 24 Aug 2023
Selected
I applied via Referral and was interviewed in Jul 2023. There were 3 interview rounds.
There was coding round in php of 5 questions and 3 to be attempted
(2 Questions)
- Q1. The technical round was in docker and php
- Q2. And about the frontend part of the websites
Interview Preparation Tips
- Docker
- php
- HTML
Selected
I applied via campus placement at Sarvajanik College of Engineering and Technology, Surat and was interviewed in Jun 2023. There were 8 interview rounds.
Prepare for the interview properly
Coding should be well prepared
Don't stay silent atleast should speak something
(1 Question)
- Q1. Be confident and maintain body language
(1 Question)
- Q1. Basic questions on the relevant subject
(1 Question)
- Q1. Basic questions on the relevant subject
Know the recent technology in the market
Supply Chain Management Trainee Interview Questions & Answers
Demech Chemical Products
Anonymous
posted on 8 Nov 2023
Selected
I applied via Naukri.com and was interviewed in Oct 2023. There were 3 interview rounds.
(1 Question)
- Q1. Introduce your self ?
(1 Question)
- Q1. Basic Knowledge About Company
Selected
I applied via Referral and was interviewed in Feb 2023. There were 3 interview rounds.
We were well trained and explained about the work, the different perspectives of pursuing the respective and how to impact positively through our work. It imbibed an insight in our minds with the aim of pursuing work with all dedication not just to acquire profit but also for the greater social cause.
We were given tasks and we're required to submit in a refered deadline.
Interview Preparation Tips
This level of transparency and accountability that Marpu foundation has built is commendable.
By partnering with the Marpu Foundation, companies can depict their commitment towards social responsibility, customer trust, and henceforth boost employee engagement.
One of the best ways to enhance our knowledge in the sphere of Corporate Social Responsibility is by partnering with a reputable NGO like the Marpu Foundation, that helps incorporating the insights in our minds.
The organization promotes education, healthcare, and empowerment for women and children, and enables one to reflect with a positive impact. As an intern I made the best decision to try out my luck here. This enabled me to reinvent myself, bring out the various possibilities that I can further use to operate myself and my skills effectively. I gained an insight towards society and Social causes and responsibilities that will always help in my future projects as well as in life instances. If anyone who bears a clear heart and mind must definitely join Marpu Foundation to further enhance themselves not only as a social being but also a human.
Operations Analyst Interview Questions & Answers
Travclan Technology India
Anonymous
posted on 7 Feb 2023
I applied via Company Website and was interviewed in Jan 2023. There were 4 interview rounds.
Simple aptitude just for filtering
(2 Questions)
- Q1. Questions around previous experience.
- Q2. What do you know about Travclan
(2 Questions)
- Q1. They asked a pattern question to test your logical abilities
- Q2. Oral maths questions.
Interview Preparation Tips
Pls discuss the compensation otherwise it would be a great waste of time.
Had requested the HR to discuss the compensation beforehand but she was a Dumbo, didn't got they offer as they didn't had the budget.
Software Development Engineer Interview Questions & Answers
Juspay Technologies
Anonymous
posted on 31 Aug 2023
Selected
I applied via Job Fair and was interviewed in Mar 2023. There were 5 interview rounds.
3 coding questions based on Tree and kind of similar to each other. Based on dijkstra algo.
One question that was a bit lengthy, with name 'Tree of Space' you can get it from internet.
I have asked to improved my code from previous round and explain it and then they ask improve your code if if the inputs are in the form of multiple thread.
(1 Question)
- Q1. I have to some tree questions like height and one question from leetcode.
(1 Question)
- Q1. Some basic questions what you want what are your goals
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Dec 2022. There were 3 interview rounds.
(3 Questions)
- Q1. Related to Linux and Networking
- Q2. Services Samba FTP, Maintenance Mode
- Q3. Troubleshooting of Network
- Ans.
Troubleshooting network involves identifying and resolving issues related to network connectivity and performance.
Start by identifying the symptoms of the problem
Check network cables and connections
Verify network settings and configurations
Use network diagnostic tools to identify and isolate the problem
Resolve the issue by applying appropriate fixes
Test the network to ensure the problem is resolved
(2 Questions)
- Q1. Qts related to Bootprocess AWS etc
- Q2. Port Forwarding of services
Interview Preparation Tips
Skills evaluated in this interview
SDE (Software Development Engineer) Interview Questions & Answers
Cogoport
Anonymous
posted on 8 Dec 2022
Selected
I applied via Campus Placement
(2 Questions)
- Q1. Tick the words boxes that best describes yourself.
- Ans.
I am a highly motivated and detail-oriented software engineer with a passion for problem-solving and continuous learning.
Highly motivated
Detail-oriented
Passionate about problem-solving
Continuous learner
- Q2. Tick the words boxes that best describes your vision of a perfect employer.
- Ans.
A perfect employer is one who values employee growth, fosters a positive work environment, and promotes work-life balance.
Values employee growth and provides opportunities for professional development
Fosters a positive work environment with open communication and collaboration
Promotes work-life balance by offering flexible schedules and benefits
Recognizes and rewards employee achievements
Provides a competitive salary a
Had to solve 50 questions in 12 minutes. Questions were very easy, only headache was to attempt as many as you could in 12 minutes. .
Had questions regarding core subjects in the multiple choice section in the 1st section of this round. In the section 2nd of this round you had 3 questions of data structures (2 easy and 1 of moderate difficulty level).
(1 Question)
- Q1. Interview revolved around Data Structures and DBMS (particularly SQL).
(1 Question)
- Q1. Standard HR questions that you probably gonna expect in every other company.
Interview Preparation Tips
Phil Group Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
Phil Group Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Phil Group Reviews and Ratings
based on 4 reviews
Rating in categories
Marpu Foundation
Huawei Technologies
HCL Infosystems
Z X Learning
- Home >
- Interviews >
- Phil Group Interview Questions
