Filter interviews by
The percentage of fly ash used in cement varies depending on the specific application and regulations.
The percentage of fly ash in cement can range from 10% to 50%.
In some cases, fly ash can replace a portion of the cement content entirely.
The amount of fly ash used in cement is often determined by local regulations and environmental considerations.
Fly ash is a byproduct of coal combustion and is commonly used as ...
The ratio of M25 concrete is 1:1:2.
The ratio of M25 concrete is 1 part cement, 1 part sand, and 2 parts aggregate.
This ratio is commonly used in construction for medium-strength concrete.
For example, if you have 1 kg of cement, you would need 1 kg of sand and 2 kg of aggregate to make M25 concrete.
The accuracy of a total station depends on various factors.
The accuracy of a total station is typically expressed in terms of angular and distance measurements.
The angular accuracy is usually specified in seconds or minutes of arc.
The distance accuracy is typically given in millimeters or inches.
The accuracy of a total station can vary depending on the make and model, as well as environmental conditions.
For exampl...
The survey instrument works by using advanced technology to measure and record precise data points for land surveying purposes.
The survey instrument uses various sensors and measurement techniques to accurately determine distances, angles, and elevations.
It typically includes a theodolite or total station for measuring angles and distances, and a leveling instrument for determining elevations.
The instrument may al...
The base point to start the layout work for a survey instrument is a fixed reference point on the ground.
The base point should be easily identifiable and stable.
It should be located near the area to be surveyed.
Common base points include existing structures, permanent markers, or survey monuments.
The base point is used as a starting point to establish the coordinate system for the survey.
Measurements and angles ar...
The accuracy of an auto level depends on its specifications and quality.
The accuracy of an auto level is typically expressed as a value in millimeters per kilometer (mm/km).
Higher quality auto levels generally have higher accuracy.
The accuracy can vary depending on factors such as the instrument's calibration, atmospheric conditions, and the skill of the operator.
For example, a high-quality auto level may have an ...
Traversing is a surveying technique used to measure distances and angles between points on the ground.
Traversing involves moving from one point to another, measuring the distance and angle between each point.
It is used to establish control points, create accurate maps, and determine the boundaries of land.
Traversing can be done using various instruments such as theodolites, total stations, or GPS receivers.
Example...
The coordinate refers to a set of numerical values that represent the position of a point in a given space.
Coordinates are used in various fields such as geography, cartography, and surveying.
They typically consist of two or three values representing the position along different axes.
For example, in a two-dimensional Cartesian coordinate system, a coordinate could be (x, y), where x represents the horizontal posit...
CTC, or Cost to Company, represents the total salary package offered by an employer, including all benefits.
CTC includes basic salary, allowances, bonuses, and benefits.
For example, if your basic salary is $50,000, and allowances are $10,000, your CTC would be $60,000.
It's important to understand the breakdown of CTC to know your take-home salary.
CTC can vary based on the company, role, and location.
I appeared for an interview before Dec 2016.
I have 10 years of experience in the field of surveying.
10 years of experience in surveying
Proficient in using surveying equipment such as total stations and GPS
Skilled in data analysis and creating accurate survey reports
CTC, or Cost to Company, represents the total salary package offered by an employer, including all benefits.
CTC includes basic salary, allowances, bonuses, and benefits.
For example, if your basic salary is $50,000, and allowances are $10,000, your CTC would be $60,000.
It's important to understand the breakdown of CTC to know your take-home salary.
CTC can vary based on the company, role, and location.
I would expect a competitive salary based on my experience and qualifications.
I would expect a salary in line with industry standards for my level of experience.
I would consider factors such as location, job responsibilities, and benefits when determining my salary expectations.
I am open to negotiation based on the overall compensation package offered by the company.
The survey instrument works by using advanced technology to measure and record precise data points for land surveying purposes.
The survey instrument uses various sensors and measurement techniques to accurately determine distances, angles, and elevations.
It typically includes a theodolite or total station for measuring angles and distances, and a leveling instrument for determining elevations.
The instrument may also ha...
Traversing is a surveying technique used to measure distances and angles between points on the ground.
Traversing involves moving from one point to another, measuring the distance and angle between each point.
It is used to establish control points, create accurate maps, and determine the boundaries of land.
Traversing can be done using various instruments such as theodolites, total stations, or GPS receivers.
Example: A s...
The coordinate refers to a set of numerical values that represent the position of a point in a given space.
Coordinates are used in various fields such as geography, cartography, and surveying.
They typically consist of two or three values representing the position along different axes.
For example, in a two-dimensional Cartesian coordinate system, a coordinate could be (x, y), where x represents the horizontal position a...
The base point to start the layout work for a survey instrument is a fixed reference point on the ground.
The base point should be easily identifiable and stable.
It should be located near the area to be surveyed.
Common base points include existing structures, permanent markers, or survey monuments.
The base point is used as a starting point to establish the coordinate system for the survey.
Measurements and angles are the...
The accuracy of a total station depends on various factors.
The accuracy of a total station is typically expressed in terms of angular and distance measurements.
The angular accuracy is usually specified in seconds or minutes of arc.
The distance accuracy is typically given in millimeters or inches.
The accuracy of a total station can vary depending on the make and model, as well as environmental conditions.
For example, a ...
The accuracy of an auto level depends on its specifications and quality.
The accuracy of an auto level is typically expressed as a value in millimeters per kilometer (mm/km).
Higher quality auto levels generally have higher accuracy.
The accuracy can vary depending on factors such as the instrument's calibration, atmospheric conditions, and the skill of the operator.
For example, a high-quality auto level may have an accur...
The percentage of fly ash used in cement varies depending on the specific application and regulations.
The percentage of fly ash in cement can range from 10% to 50%.
In some cases, fly ash can replace a portion of the cement content entirely.
The amount of fly ash used in cement is often determined by local regulations and environmental considerations.
Fly ash is a byproduct of coal combustion and is commonly used as a sup...
The ratio of M25 concrete is 1:1:2.
The ratio of M25 concrete is 1 part cement, 1 part sand, and 2 parts aggregate.
This ratio is commonly used in construction for medium-strength concrete.
For example, if you have 1 kg of cement, you would need 1 kg of sand and 2 kg of aggregate to make M25 concrete.
Top trending discussions
I applied via Naukri.com and was interviewed before Feb 2020. There were 5 interview rounds.
I applied via Company Website and was interviewed in Feb 2021. There was 1 interview round.
I applied via Referral and was interviewed before Aug 2021. There were 2 interview rounds.
I applied via Job Portal and was interviewed before Feb 2021. There were 2 interview rounds.
Dynamic professional with diverse experience in management, team leadership, and strategic planning, eager to contribute to organizational success.
Over 8 years of experience in management roles, leading teams to achieve operational excellence.
Successfully implemented a new project management system that increased efficiency by 30%.
Strong background in financial analysis, having managed budgets exceeding $1 million.
Prov...
I applied via Company Website and was interviewed in Dec 2021. There were 2 interview rounds.
Dynamic professional with diverse experience in management, team leadership, and strategic planning, eager to drive organizational success.
Over 7 years of experience in management roles, leading teams to exceed performance targets.
Successfully implemented a new project management system that improved efficiency by 30%.
Strong background in financial analysis, having managed budgets exceeding $1 million.
Proven ability to...
I applied via Naukri.com and was interviewed in Oct 2020. There was 1 interview round.
I applied via Campus Placement and was interviewed before Apr 2020. There were 4 interview rounds.
based on 1 review
Rating in categories
Civil Supervisor
4
salaries
| ₹3.2 L/yr - ₹3.8 L/yr |
Accounts Officer
3
salaries
| ₹4.2 L/yr - ₹5.4 L/yr |
TCS
Accenture
Wipro
Cognizant