Filter interviews by
I applied via Campus Placement and was interviewed before Aug 2022. There were 4 interview rounds.
PLCs are used in industrial areas for real-time control and automation, while SCADA systems are used for monitoring and data acquisition.
PLCs are designed for real-time control of machinery and processes in industrial settings.
PLCs are more reliable and robust for controlling critical processes compared to SCADA systems.
SCADA systems are typically used for monitoring and data acquisition in industrial settings.
PLCs are...
Different types of motors are used in different applications based on their characteristics and requirements.
Select motor type based on application requirements (e.g. AC motor for household appliances, DC motor for automotive applications)
Consider factors like speed, torque, power, efficiency, and control method when choosing a motor
Use stepper motors for precise positioning in robotics and CNC machines
Utilize servo mo...
How to work program in any processer
What is rectify
What is converter
What is chhoper
What is sycloconveter
I applied via Walk-in and was interviewed before Jul 2023. There were 2 interview rounds.
A pressure gauge is a device used to measure the pressure of a fluid (liquid or gas) in a system.
Pressure gauges typically consist of a dial with a needle that indicates the pressure reading in units such as psi, bar, or kPa.
They are commonly used in industrial processes, HVAC systems, automotive applications, and medical equipment.
Pressure gauges can be analog or digital, with analog gauges being more traditional and ...
A pressure gauge is a device used to measure the pressure of a fluid (liquid or gas) in a system.
Pressure gauges typically consist of a dial with a needle that indicates the pressure reading in units such as psi, bar, or kPa.
They are commonly used in industrial processes, HVAC systems, automotive applications, and medical equipment.
Pressure gauges can be analog or digital, with some models also featuring alarms or data...
I applied via Approached by Company and was interviewed in Oct 2024. There were 2 interview rounds.
Newton's laws of motion describe the relationship between an object and the forces acting on it.
First law: An object at rest stays at rest, and an object in motion stays in motion unless acted upon by an external force.
Second law: The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
Third law: For every action, there is an equal and opposite reactio...
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to the resistance.
Ohm's Law formula: V = I * R (Voltage = Current * Resistance)
Current (I) is measured in Amperes (A)
Voltage (V) is measured in Volts (V)
Resistance (R) is measured in Ohms (Ω)
Example: If a circuit has a voltage of 12V and a resistance of 4Ω, the current flowing throu
The name of transformer in Hindi language is 'ट्रांसफार्मर'.
The word 'transformer' is translated to 'ट्रांसफार्मर' in Hindi.
It is pronounced as 'traans-faar-mer' in Hindi.
In written form, it is represented as 'ट्रांसफार्मर'.
posted on 19 Dec 2024
I am applying for this job because of my passion for managing civil projects and my proven track record of successful project completions.
Passion for managing civil projects
Proven track record of successful project completions
Excited about the opportunity to contribute to impactful infrastructure projects
I requested a salary hike due to increased responsibilities, achievements, and market value.
Increased responsibilities in current role
Achievements such as successful completion of projects or exceeding targets
Market value based on industry standards and experience
Cost of living increase or inflation affecting expenses
The various stages of construction of the foundation of a building include site preparation, excavation, foundation design, footing construction, and foundation pouring.
Site preparation involves clearing the area and leveling the ground for construction.
Excavation is the process of digging a hole in the ground to create space for the foundation.
Foundation design is crucial to ensure the building's stability and load-be...
The design mix for concrete is the proportion of various ingredients like cement, sand, aggregates, and water to achieve the desired strength and durability.
Design mix is determined based on the required strength and durability of the concrete
It involves selecting the right proportions of cement, sand, aggregates, and water
Various factors like type of construction, exposure conditions, and desired workability influence...
I applied via Approached by Company and was interviewed in May 2024. There were 2 interview rounds.
The life cycle of an asset refers to the stages it goes through from acquisition to disposal.
Acquisition: The asset is obtained and put into use.
Utilization: The asset is used for its intended purpose.
Maintenance: Regular maintenance and repairs are performed to ensure optimal performance.
Depreciation: The asset loses value over time due to wear and tear.
Disposal: The asset is either sold, scrapped, or otherwise dispos...
Depreciation is for tangible assets like buildings and machinery, while amortization is for intangible assets like patents and copyrights.
Depreciation is the allocation of the cost of tangible assets over their useful life.
Amortization is the allocation of the cost of intangible assets over their useful life.
Depreciation is typically used for assets like buildings, machinery, and vehicles.
Amortization is typically used...
Asset under construction refers to assets that are being constructed or developed but are not yet completed and ready for use.
Assets under construction are not yet in use and are still being developed or built.
These assets are typically recorded as a separate category on the balance sheet until they are completed and ready for use.
Examples include buildings, machinery, and infrastructure projects that are still in the
Asset revaluation is the process of adjusting the value of assets on a company's balance sheet to reflect their current market value.
Asset revaluation is typically done to ensure that the assets are not carried on the balance sheet at a value that is significantly different from their current market value.
Revaluation can result in an increase or decrease in the value of assets, which can impact the company's financial ...
I applied via Walk-in and was interviewed in Jun 2024. There was 1 interview round.
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
MTTR stands for Mean Time To Repair and MTBF stands for Mean Time Between Failures.
MTTR is the average time taken to repair a failed component or system.
MTBF is the average time between failures of a component or system.
MTTR is calculated as total downtime divided by the number of failures.
MTBF is calculated as total uptime divided by the number of failures.
For example, if a system has an MTTR of 2 hours and an MTBF of...
Data type string in PLC is used to store alphanumeric characters or text data.
String data type is used to store text data in PLC programming.
Strings can be used to store alphanumeric characters, words, sentences, etc.
Example: STRING name := 'John Smith';
posted on 22 Jul 2024
I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.
2 hours of psychometric test including English test
African Industries
Rio Tinto
Imerys
Oswal Castings