Upload Button Icon Add office photos

Filter interviews by

NDR Auto Components Interview Questions, Process, and Tips

Updated 19 Jan 2025

Top NDR Auto Components Interview Questions and Answers

NDR Auto Components Interview Experiences

Popular Designations

4 interviews found

Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. What is the process for understanding tasks or procedures at work?
  • Q2. What are the daily safety rules that must be followed by the manpower in the company?

Production Supervisor Interview Questions asked at other Companies

Q1. What is the responsibility of production supervisor?
View answer (48)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. First of all about yourself , education , experience nd your family background.
  • Q2. Reason behind job change
  • Q3. Roles and responsibilities
Round 3 - Technical 

(4 Questions)

  • Q1. How much sample will you take out from a lot of 200No's in PDI
  • Ans. 

    Typically, 10% of the lot is sampled for PDI testing.

    • Generally, 10% of the lot is sampled for PDI testing.

    • For a lot of 200No's, you would take out 20 samples for PDI.

    • The sample size may vary depending on the specific requirements and standards of the industry.

  • Answered by AI
  • Q2. You spent 8hrs in your company , what things you do in those 8 hours
  • Q3. How will you write an E-mail to your QA manager regarding facing a repeated problem on regular basis
  • Ans. 

    Email to QA manager regarding repeated problem

    • Clearly describe the repeated problem you are facing

    • Provide examples or data to support your claim

    • Suggest possible solutions or improvements

    • Request a meeting or discussion to address the issue

    • Maintain a professional and respectful tone

  • Answered by AI
  • Q4. Least counts of intruments
  • Ans. 

    Least count of an instrument refers to the smallest change in the measured quantity that can be detected by the instrument.

    • Least count is determined by the smallest division on the scale of the instrument.

    • It is important for accurate measurements and precision in quality assurance.

    • For example, a ruler with millimeter divisions has a least count of 1 mm.

    • Another example is a digital scale with a least count of 0.01 grams

  • Answered by AI

Junior Engineer - Quality Assurance Interview Questions asked at other Companies

Q1. How do you automate filtering and validate it's been filtered as desired?
View answer (1)

I applied via Naukri.com and was interviewed in Jun 2022. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Self introduction about your and family backround.
  • Q2. Previous working experinece
  • Ans. 

    I have worked as a Junior QA Engineer for 2 years in a software development company.

    • Worked on testing web and mobile applications

    • Created test cases and executed them

    • Identified and reported defects

    • Collaborated with developers to resolve issues

    • Participated in Agile development process

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Basic previous working company roles and responsibility related questions
Round 3 - Technical 

(3 Questions)

  • Q1. Welding related questions
  • Q2. Difference between MIG and MAG welding Welding electrodes difference. Welding defects related Questions.
  • Q3. Difference between resistance and arc welding
  • Ans. 

    Resistance welding uses pressure and heat to join metals, while arc welding uses an electric arc to melt and fuse metals.

    • Resistance welding involves applying pressure and passing an electric current through the metals to create heat and join them together.

    • Arc welding uses an electric arc to melt and fuse metals together, without the need for pressure.

    • Resistance welding is commonly used for spot welding, while arc weldi...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for NDR Auto Components Junior Engineer - Quality Assurance interview:
  • Welding Process
  • Welding Inspection
Interview preparation tips for other job seekers - At interview time talk bold and what you know .

Junior Engineer - Quality Assurance Interview Questions asked at other Companies

Q1. How do you automate filtering and validate it's been filtered as desired?
View answer (1)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jan 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Dission on JD preparation
  • Q2. Discussion on TA process

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well and be confident

Deputy Manager Interview Questions asked at other Companies

Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with us and which products...3.what is main business in your area and its functions...4 Previous comoany achevements 5.Your strengts and weakness.
View answer (69)

NDR Auto Components interview questions for popular designations

 Junior Engineer - Quality Assurance

 (2)

 Production Supervisor

 (1)

 Deputy Manager

 (1)

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Introduce yourself
  • Q2. Tell me something about G 20 summit
  • Q3. 1. As Leaders of G20, the premier global forum for international economic cooperation, we resolve to act in concrete ways through partnerships. We commit to: 2. Accelerate strong, sustainable, balanced a...

Interview Preparation Tips

Interview preparation tips for other job seekers - I do not have any advice for job seeker but everyone must work on upgrading their skillset in a such a way noone dare to reject him for his//her desired job or positions

Interview Questionnaire 

9 Questions

  • Q1. Your Dream
  • Ans. 

    My dream is to create innovative software solutions that positively impact people's lives.

    • Developing cutting-edge technology

    • Solving complex problems

    • Improving user experience

    • Collaborating with talented individuals

    • Making a difference in society

  • Answered by AI
  • Q2. WHy you want to join this orgainsation
  • Ans. 

    I am excited to join this organization because of its reputation for innovation and commitment to employee growth.

    • I am impressed by the company's track record of developing cutting-edge software solutions.

    • I am excited about the opportunity to work with a team of talented and motivated engineers.

    • I appreciate the company's focus on employee development and growth.

    • I am drawn to the company's culture of innovation and coll...

  • Answered by AI
  • Q3. How much can you work with this organisation
  • Ans. 

    I am willing to work full-time with this organization and put in extra hours if required.

    • I am committed to delivering quality work within deadlines

    • I am open to working overtime and on weekends if necessary

    • I am willing to take on additional responsibilities if needed

  • Answered by AI
  • Q4. About your family
  • Q5. Firstly about yourself
  • Q6. Strengths , weakness
  • Q7. Basic C questions . Difference between structure and union
  • Q8. How can we attach one variable from one file to another
  • Ans. 

    To attach one variable from one file to another, we can use import or require statements in programming languages.

    • In JavaScript, we can use the 'require' statement to import a variable from another file.

    • In Python, we can use the 'import' statement to import a variable from another file.

    • We can also use the 'export' statement in the source file to export the variable and then import it in the destination file.

    • The syntax ...

  • Answered by AI
  • Q9. Where will you think about yourself after 3 years i this organisation

Interview Preparation Tips

Round: Test
Experience: First round of written test is of aptitute and data analysis  . questions are easy 30 questions in 40 . Be fast as time is less.
second round of written test consists of all other section each section involves 15 questions . 
Questions are easy  just go through your syllabus , course books  nothing special . 
If you are preparing for GATE will be really beneficial  .  
for C go trough Depth in C  . very basic questions asked for it.
for MATLAB learn the basic determinant rules questions involved that  .  Only basic of MATLAB  no image processing or higher level programming ..
Tips: attempt ass many as questions .. Try to attempt  all sections  . If you are strong in programming make do attempt C and MATLAB portion  . as there is post for software department also  in organisation .   Main department is the core department  for that do attempt other portions  .
Duration: 120 minutes

Round: Resume Shortlist
Experience: They are not gonna to see your certificates  , They are even not much interested in your CGPA . 
If your CGPA is low you should have an accurate reason for that if they ask .
Tips: Your Resume should be Short and Compact  . Don't make it too large . 1 , 1.5 pages  will be enough  .
the thing which you want to show to HR majorly in your RESUME should be keep at  upper portion , it can be your qualification   , your achievements(IIT rank , KVPY etc.)  or whatever you feels sholud be on top.  you should have deep knowledge about your projects and internship . Each and every thing thing written in your RESUME should be clear to you  and able to explain to them .

Round: Group Discussion
Experience: Easy not much stress .
Tips: Be confident  . try to give your different point of view of a particiular thing  .  don't stop suddenly while saying anything .
Duration: 120 minutes

Round: Problem Statement
Experience: not a easy question as i am not able to give accurate answer. 
HR will give some time to solve the problem .
Tips: Try to give answer.  even if you don't know try to give different explanation for it  . give 3-4 different explanations.  always trying to solve the question .

Round: HR Interview
Experience: little bit tough . Your anwer should be different . it should not be copied from somewhere .
depends on how you know yourself.
Tips: Have smile on your face . Give all answer with smile . don't hesitate . Give each and  every answer . 
be fluent . let the HR complete the question and then answer.

Round: Technical Interview
Tips: go through depth  in C .  knows the basic concept of each chapter .  give complete explanation .  be accurate .

General Tips: Be confident and smile on your face .
Skills: C , EDC, MATLAB, Control system
College Name: NIT BHOPAL
Motivation: good work culture . easy job . not much work stress      .  nice wore location .
good seniors review . Also have chance to go abroad  in early days .
Funny Moments: HR had taken about  90% interview while thing me as other student , as he didn't took my RESUME .  by in the last he told the wrong name . I made correction to him by saying that sorry sir it's my mistake that i haven't give you my RESUME  . but actually he hasn't took my RESUME  . means i admire my mistake infact its his mistake  .

I was interviewed before May 2016.

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 90

Round: Group Discussion
Duration: 20 minutes

Interview Preparation Tips

Round: Test
Experience: more of experience gaining and learning new tricks of codding a program.
Tips: must focus on bugging and debugging the program.
Duration: 60 mins minutes

Skills: Coding Skills,
College Name: Invertis university
Motivation: bosch is a multinational company stating its rank worldwide.so anyone would to work with outstanding company.

Interview Questionnaire 

16 Questions

  • Q1. Explain about the projects you have done, have you done them for curriculum or out of interest?
  • Ans. 

    I have done several projects both for curriculum and out of interest.

    • Developed a web application for a college project using HTML, CSS, and JavaScript.

    • Created a mobile app for tracking expenses using React Native out of interest.

    • Built a chatbot using Python for a hackathon project.

    • Developed a website for a local business using WordPress for a freelance project.

    • Created a game using Unity for a personal project.

  • Answered by AI
  • Q2. What are your favourite subjects?
  • Ans. 

    My favorite subjects are computer science, mathematics, and physics.

    • Computer Science: I enjoy programming and learning about algorithms and data structures.

    • Mathematics: I find solving complex problems and equations very satisfying.

    • Physics: I am fascinated by the laws of nature and how they govern the universe.

  • Answered by AI
  • Q3. Draw the block diagram, and explain all the components of 8051 micro-controller
  • Ans. 

    The 8051 micro-controller consists of CPU, RAM, ROM, Timers, Serial Port, Interrupts, and I/O ports.

    • The CPU is the main processing unit of the micro-controller.

    • The RAM is used for storing data temporarily.

    • The ROM contains the program code that is executed by the CPU.

    • The Timers are used for generating precise time delays.

    • The Serial Port is used for communication with other devices.

    • The Interrupts are used for handling ex...

  • Answered by AI
  • Q4. Difference between Micro-controller and Microprocessor
  • Ans. 

    Microprocessors are general-purpose CPUs while microcontrollers are designed for specific tasks.

    • Microprocessors are used in computers, smartphones, and other devices that require complex processing.

    • Microcontrollers are used in embedded systems, such as home appliances, automotive systems, and medical devices.

    • Microprocessors have separate memory and I/O interfaces while microcontrollers have them integrated on a single ...

  • Answered by AI
  • Q5. What are Von Neumann and Harvard classifications, which does 8051 belong to?
  • Ans. 

    Von Neumann and Harvard are computer architecture classifications. 8051 belongs to Harvard architecture.

    • Von Neumann architecture has a single memory space for data and instructions, while Harvard architecture has separate memory spaces for data and instructions.

    • 8051 microcontroller uses Harvard architecture as it has separate memory spaces for program instructions and data.

    • Harvard architecture allows simultaneous acces...

  • Answered by AI
  • Q6. How many bit is data bus and how many is address bus, also if there are 8 lines how many memory locations are present?
  • Q7. What are interrupts? Explain in detail what happens in 8051 when there is interrupt, What happens when there is an interrupt within an interrupt?
  • Ans. 

    Interrupts are signals that temporarily halt the execution of a program to handle a specific event.

    • When an interrupt occurs in 8051, the program counter is saved on the stack and the interrupt service routine (ISR) is executed.

    • The ISR handles the interrupt and then returns control to the main program by restoring the program counter from the stack.

    • If an interrupt occurs while another interrupt is being serviced, the se...

  • Answered by AI
  • Q8. Where is the location of current line of execution stored when there is an interrupt?
  • Ans. 

    The location of current line of execution is stored in the stack when there is an interrupt.

    • When an interrupt occurs, the processor saves the current state of execution on the stack.

    • The location of the current line of execution is stored in the program counter (PC) register.

    • The PC register is pushed onto the stack along with other registers.

    • After the interrupt is serviced, the processor pops the saved state from the st

  • Answered by AI
  • Q9. Draw basic logic gates
  • Ans. 

    Logic gates are basic building blocks of digital circuits. They perform logical operations on inputs to produce outputs.

    • AND gate: output is 1 only if both inputs are 1

    • OR gate: output is 1 if either input is 1

    • NOT gate: output is the opposite of the input

    • NAND gate: output is 0 only if both inputs are 1

    • NOR gate: output is 0 if either input is 1

    • XOR gate: output is 1 if inputs are different

    • XNOR gate: output is 1 if inputs a

  • Answered by AI
  • Q10. Draw half adder without using EXOR gate , draw full adder without EXOR
  • Ans. 

    Draw half adder and full adder without using EXOR gate.

    • Half adder can be implemented using AND and OR gates

    • Full adder can be implemented using two half adders and an OR gate

    • In half adder, sum is obtained by ORing two inputs and carry is obtained by ANDing two inputs

    • In full adder, sum is obtained by using two half adders and an OR gate, and carry is obtained by ANDing three inputs

  • Answered by AI
  • Q11. Given an input string, remove spaces and give me output string
  • Ans. 

    Remove spaces from input string and return output string

    • Iterate through each character of the input string

    • If the character is not a space, add it to the output string

    • Return the output string

  • Answered by AI
  • Q12. Tell me about yourself
  • Ans. 

    I am a software engineer with experience in developing web applications and a passion for learning new technologies.

    • Graduated with a degree in Computer Science

    • Proficient in programming languages such as Java, Python, and JavaScript

    • Experience in developing web applications using frameworks like React and Angular

    • Passionate about learning new technologies and keeping up with industry trends

  • Answered by AI
  • Q13. Family background ( what does your father do ?, what does your mother do?, etc)
  • Ans. 

    My father is a businessman and my mother is a homemaker.

    • My father runs a small business in our hometown.

    • My mother takes care of the household and our family.

    • My parents have always been supportive of my education and career goals.

  • Answered by AI
  • Q14. Why Bosch?
  • Ans. 

    Bosch is a renowned company with a strong focus on innovation and sustainability.

    • Bosch has a reputation for being a leader in innovation and technology.

    • The company has a strong commitment to sustainability and social responsibility.

    • Bosch offers a diverse range of products and services, providing opportunities for growth and development.

    • The company has a global presence, offering the chance to work with people from diff

  • Answered by AI
  • Q15. What did you understand from yesterday's presentation?
  • Ans. 

    I understood the main points of the presentation.

    • The presentation covered the new software development process.

    • It emphasized the importance of collaboration between teams.

    • It also highlighted the need for continuous testing and feedback.

    • I learned about the new tools and technologies that will be used.

    • Overall, I found the presentation informative and useful.

  • Answered by AI
  • Q16. What are your plans for higher studies?
  • Ans. 

    I plan to pursue higher studies in computer science to enhance my skills and knowledge.

    • I am interested in pursuing a Master's degree in Computer Science.

    • I am also considering taking online courses to learn new technologies and programming languages.

    • I plan to attend workshops and conferences to stay updated with the latest trends in the industry.

    • I believe that continuous learning is essential to stay competitive in the

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: The technical section consisted of questions different branches. I shall answer from ECE point of view. The test had same questions for electrical cluster , ie ECE ,EEE, IT,TC . There were 35 questions in this section. The questions were based on subjects in 1st 2nd and 3rd year. Mainly concentrated on DEC, AEC, Micro-controllers, Control systems and a few basic electronics questions as well. This section also had 5 questions on programming as well. The test also had negative marking. +1 and -0.25 was the scheme. The second aptitude section had 25 questions on logical reasoning, data interpretation.
Tips: Answer only those questions which you are confident about the answer.
Duration: 60 minutes
Total Questions: 60

Round: Technical Interview
Experience: The interview started on a tensing note, but he told me to make myself comfortable. He was more interested in how I would approach the problem rather than the syntax or trivialities of the code. He tried to confuse me even when my answer was correct. The interview went on for 30-40 mins. At the end of which the interviewer gave me a HR form to fill, and told me to proceed to the HR interview.
Tips: Be confident and do not say things you don't know about, many of my friends got rejected for bluffing.

Round: HR Interview
Experience: The interviewer had a stern expression on his face, and was serious throughout the interview. He asked me why i had done a C++ project though i was from a ECE background, ( I explained that I had taken an elective OOPS which required us to do a mini project as a part of our curriculum). He also asked what i know about Bosch, this is a definite question, prepare well for it.
Tips: Be confident and truthful, do not bluff about anything. They are well trained to detect those anomalies.

General Tips: Prepare the subjects of second year and third year well. Do not panic in the interview, answer the questions to the point.
Skill Tips: Revise your understanding of your projects thoroughly.
Skills: Knowledge about microcontrollers, Knowledge about AEC and DEC basics, Some knowledge about Control systems, Thorough understanding about the projects pursued.
College Name: BMS College Of Engineering, Bangalore
Motivation: Bosch is one of the pioneers in the embedded systems domain. Also I had heard very good reviews from my seniors about the company.

Skills evaluated in this interview

Interview Questionnaire 

5 Questions

  • Q1. What are your strengths, weaknesses..?
  • Ans. 

    My strengths include leadership, problem-solving, and communication. My weaknesses are time management and public speaking.

    • Strengths: Leadership - I have experience leading teams and delegating tasks. Problem-solving - I am able to think critically and find solutions to complex problems. Communication - I am able to effectively communicate with team members and clients.

    • Weaknesses: Time management - I sometimes struggle...

  • Answered by AI
  • Q2. What irritates you most..?
  • Ans. 

    Inefficiency and lack of communication irritate me the most.

    • Inefficiency in completing tasks

    • Lack of communication within the team

    • Not being able to meet deadlines due to lack of planning

    • Unnecessary delays in decision-making

    • Micromanagement

    • Lack of clarity in instructions

  • Answered by AI
  • Q3. What do you do in such situations..?
  • Ans. 

    I assess the situation, gather information, and make a decision based on company policies and procedures.

    • Assess the situation and determine the severity of the issue

    • Gather information from all parties involved

    • Refer to company policies and procedures for guidance

    • Make a decision based on the information gathered and company guidelines

    • Communicate the decision to all parties involved

  • Answered by AI
  • Q4. Are you a leader or a follower...?
  • Ans. 

    I am a leader who can also follow when necessary.

    • I believe in leading by example and inspiring others to follow.

    • I am comfortable taking charge and making decisions, but also value input from others.

    • I am adaptable and can switch between leading and following depending on the situation.

    • For example, in a team project, I would take the lead in organizing and delegating tasks, but also listen to and incorporate ideas from t...

  • Answered by AI
  • Q5. Which one is good

Interview Preparation Tips

Round: Resume Shortlist
Experience: I have a CGPA 7.38.

Round: Test
Experience: There was an online objective test
Tips: Previous year IIT Gate book is the best thing to prepare for the technical test for any company. I started doing it in October only.
Duration: 80 min minutes

Round: Interview
Experience: There were two rounds of interview ; 30min for Tech and 10 min HR.
Tips: If you are in ED they will test your basic design skills. They showed a CAD drawing and asking the meaning of symbols, then they asked questions related to general designs available in our surroundings like why is that sewage hole round on the ground why not square or others. If you are in Mechanical, they will ask u core Mech subjects. So please first prepare very well subjects related to your respective interns. A whole interview can be drawn on that. In my case it was IC engine so I answered all the questions related to it and that didn't allow them to ask in any other topic.

Round: Interview
Experience: It was gen. All HR rounds just want to test how much positive you are in life, whether you will leave the company soon.
Tips: Be prepared with answers beforehand. The answers to all the above questions should be "depends on the
situation" and describe them in which situation u will choose which one. PS: if it’s a panel where HR is also there, they will try to excite you by asking gen questions like which team you support in IPL, do u have any gf etc. to make you lite, then again shoot you with some questions. Please don’t get deviated by those.

Skill Tips: Mock tests, Aimcats, Gate book. For GDs, we organised them in our wing. It was very helpful.
Kindly do it often in your wing and among your batch mates too. Same goes for interview. There
are lots of general interview questions available on FTP server, prepare for them well and have
mock interviews. "Alumni interviews" were very helpful, please attend that. Randstad sessions were an absolutely waste of money and time. I was mainly selected due to my internship with Bosch. Prepare all subjects related to your intern. It will be the game changer.
College Name: IIT Madras

NDR Auto Components Interview FAQs

How many rounds are there in NDR Auto Components interview?
NDR Auto Components interview process usually has 2 rounds. The most common rounds in the NDR Auto Components interview process are HR, Technical and Resume Shortlist.
How to prepare for NDR Auto Components interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at NDR Auto Components. The most common topics and skills that interviewers at NDR Auto Components expect are Manufacturing, ACAD, Automobile, MS Office and Production.
What are the top questions asked in NDR Auto Components interview?

Some of the top questions asked at the NDR Auto Components interview -

  1. How much sample will you take out from a lot of 200No's in ...read more
  2. How will you write an E-mail to your QA manager regarding facing a repeated pro...read more
  3. Difference between resistance and arc weld...read more

Tell us how to improve this page.

NDR Auto Components Interview Process

based on 4 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 328 Interviews
UNO Minda Interview Questions
4.0
 • 168 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
Marelli Interview Questions
3.7
 • 36 Interviews
View all

NDR Auto Components Reviews and Ratings

based on 53 reviews

4.0/5

Rating in categories

3.9

Skill development

3.8

Work-life balance

3.7

Salary

3.7

Job security

3.7

Company culture

3.4

Promotions

3.6

Work satisfaction

Explore 53 Reviews and Ratings
Senior Engineer
17 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare NDR Auto Components with

Bharat Forge

3.9
Compare

Samvardhana Motherson Group

3.7
Compare

TVS Sundram Fasteners

3.7
Compare

Rane Holdings

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview