Upload Button Icon Add office photos

Nalco

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Nalco Graduate Engineer Trainee (Get) Interview Questions, Process, and Tips

Updated 27 Jan 2023

Top Nalco Graduate Engineer Trainee (Get) Interview Questions and Answers

  • Q1. What are the subjects in 4th Sem of BTech in your branch.
  • Q2. What is CRO and it works? What is voltmeter, ammeter, potentiometer, rectifier and does it works with an example.
  • Q3. Tell me something about NALCO and what is the procedure to produce alluminium
View all 6 questions

Nalco Graduate Engineer Trainee (Get) Interview Experiences

3 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Gate 

(2 Questions)

  • Q1. How to extract aluminium from bauxite
  • Ans. 

    Aluminium is extracted from bauxite through the Bayer process which involves crushing, digestion, precipitation, and calcination.

    • Bauxite is first crushed into small pieces

    • The crushed bauxite is then mixed with a hot caustic soda solution in a digester vessel

    • The resulting slurry is filtered to remove impurities

    • The filtered solution is then cooled and aluminium hydroxide is precipitated

    • The precipitated aluminium hydroxid...

  • Answered by AI
  • Q2. What are the inputs for blast furnace
  • Ans. 

    Inputs for blast furnace include iron ore, coke, limestone, and hot air.

    • Iron ore is the primary input and is usually in the form of hematite or magnetite

    • Coke is a fuel used to heat the furnace and is made from coal

    • Limestone is added to remove impurities and create slag

    • Hot air is blown into the furnace to increase the temperature

    • Other inputs may include scrap metal, fluxes, and additives

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm bcz interviewer are very kind and humble
They will ask simple and fundamental to intermediate level questions.

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. About the family
  • Q2. Tell us something about your job profile
  • Ans. 

    As a Graduate Engineer Trainee, my job profile involves learning and applying engineering concepts in real-world scenarios.

    • I will be working under the guidance of experienced engineers to gain practical knowledge.

    • I will be involved in various projects and tasks related to my field of study.

    • I will be responsible for analyzing data, creating reports, and presenting my findings to the team.

    • I will be expected to learn new ...

  • Answered by AI
  • Q3. Why is the frame of bicycle hollow
  • Ans. 

    The frame of a bicycle is hollow to reduce weight and increase maneuverability.

    • Hollow frame reduces weight and makes it easier to handle

    • Allows for better shock absorption

    • Enables internal cable routing for a cleaner look

    • Examples of materials used for hollow frames include aluminum, carbon fiber, and titanium

  • Answered by AI
  • Q4. Two stroke and four stroke engine

Interview Preparation Tips

Round: Technical + HR Interview
Experience: Keep it simple.. Your education, family members and their profession

Graduate Engineer Trainee (Get) Interview Questions Asked at Other Companies

asked in JBM Group
Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Diffe ... read more
Q2. How to check for continuity for a wire inside a wall if the start ... read more
Q3. What will be the cost of painting the wall behind me?
Q4. What happen when there is large air void in concrete?
Q5. What are the different types of concrete?

I applied via Referral and was interviewed before Jan 2017. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Give your introduction. Why you want to do the job?
  • Ans. 

    I am a recent graduate with a strong passion for engineering and a desire to learn and grow in a professional environment.

    • I have a solid educational background in engineering, with a focus on [specific field or specialization].

    • I am eager to apply my theoretical knowledge to practical projects and gain hands-on experience.

    • I am excited about the opportunity to work with a team of experienced engineers and learn from thei...

  • Answered by AI
  • Q2. What are the subjects in 4th Sem of BTech in your branch.
  • Ans. 

    The subjects in the 4th semester of BTech vary depending on the branch.

    • Some common subjects in the 4th semester of BTech include Data Structures, Digital Electronics, Signals and Systems, and Electromagnetic Theory.

    • For example, in the Computer Science branch, subjects like Database Management Systems and Operating Systems may be included.

    • In the Mechanical Engineering branch, subjects like Fluid Mechanics and Thermodyna...

  • Answered by AI
  • Q3. What is CRO and it works? What is voltmeter, ammeter, potentiometer, rectifier and does it works with an example.
  • Ans. 

    CRO stands for Cathode Ray Oscilloscope. It is an electronic device used to visualize and analyze electrical signals.

    • CRO is used to display waveforms and measure voltage, frequency, and time intervals.

    • It works by generating an electron beam that is deflected by the input signal and displayed on a screen.

    • CROs are commonly used in electronics, telecommunications, and engineering fields.

    • Example: A CRO can be used to analy...

  • Answered by AI
  • Q4. Tell me something about NALCO and what is the procedure to produce alluminium
  • Ans. 

    NALCO is a leading aluminium producer. The procedure to produce aluminium involves several steps.

    • NALCO is short for National Aluminium Company Limited.

    • It is a public sector enterprise in India.

    • NALCO is involved in the mining, refining, and smelting of bauxite to produce aluminium.

    • The procedure to produce aluminium includes mining bauxite, refining it into alumina, and then smelting alumina to obtain aluminium metal.

    • Bau...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: 60% through out Career

General Tips: The interview last for 20-30 minutes.The questions asked to me were related to my BTech curriculum i.e. instrumentation related topics.You should be calm and use your presence of mind.I was able to answer most of the questions asked by the interviewer.
Skills: Communication, Body Language
Duration: 1-3 Months

Interview questions from similar companies

I was interviewed in Apr 2017.

Interview Questionnaire 

1 Question

  • Q1. Introduce myself
  • Ans. 

    I am a recent graduate with a degree in Mechanical Engineering, passionate about problem-solving and eager to learn and grow in the field.

    • Recent graduate with a degree in Mechanical Engineering

    • Passionate about problem-solving

    • Eager to learn and grow in the field

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: General Aptitude Test, Technical Aptitude Test . 30 questions in each section. there was section wise cut off.
Tips: complete in time
Duration: 1 hour 30 minutes
Total Questions: 90

Round: Group Discussion
Experience: Around 10 of us selected in the first round were asked to sit in a group and discuss about the given topic. There were two people marking our score based on the way of communicating and the points we were making.
Tips: try to conclude or initiate the discussion
Duration: 15 minutes

Round: HR Interview
Experience: The first question was to introduce myself in such a way that they can know all important things about me in 2 mins. After general introduction, I included my software skills and trips to other colleges. Then they started asking about Surpac and my project. Some were related to Shovel capacity. Lastly, I was asked whether I could live in remote rural areas.
My teacher once said "Keep the handle of your interview is in your hand. Once the interviewer starts driving, it is destined to crash." Take the interview in the direction where you are confident, be it your project or training report. Do not bluff there as it may backfire. It is okay if you say "I DON'T KNOW" to few questions rather than bluffing.

Tips: Be prepared for the normal questions and keep calm in the interview. Many interviewers want their candidate to be confident.

College Name: NIT Raipur

Interview Preparation Tips

Round: Test
Experience: Average level of difficulty.
Tips: Study mechanical and physical metallurgy as well as iron and steel making properly.
Duration: 60 minutes
Total Questions: 50

Round: Group Discussion
Experience: There were 12 candidates in my GD group including me so you need to speak enough over the topic and you need to show some good GD atticates which will work in your favour.

Round: Technical Interview
Experience: My PI consisted many ups and downs I.e. Silence of half an hour and then continuous speaking of about 20 min. As it was a kind of group interview but the questions were asked to individual and questions were not passed to the other candidate I.e. It was 3(HR) on 1 interview but two other candidates were also listening your interview.
Tips: My interview was based only on my industrial project and nothing else. Just know your project very well do it very seriously so that you are answerable to each and every question that will be bombarded over you!!!
And discover your passion till fourth year and accordingly choose the company. Do not experiment with your life and if confused talk to your seniors.

General Tips: The most important thing which matters is how passionate and how eager you are to work with them. Also most important is positive attitude towards every problem.
Skill Tips: If you ask any senior about cpi and if he says that it doesn't matter then he is definitely misguiding you!!!! Weightage of cpi and your technical is equal. If he says make your technical sound and you will be selected then it happens very rarely at least in our college. They want to see your performance in your academic session. They want to see how consistant you will be in their company and how serious you are towards your work and also towards your career. Less cpi even if you are constant through out, tells them that you will not grow after some point of time so they want growing and consistently growing performance which help them in their company. And backlog history matters more then your cpi because companies are nowadays asking for no backlog history so if you are not eligible for company then to whom you will show your pointers???
Skills: CGPA, Eagerness to work, Positive attitude
College Name: NIT RAIPUR

Interview Questionnaire 

12 Questions

  • Q1. Draw the diagram of a transformer from both secondary and primary end?
  • Ans. 

    A transformer diagram can be drawn from both primary and secondary ends.

    • Draw two parallel lines representing the core of the transformer

    • Draw two coils around the core, one for primary and one for secondary

    • Connect the coils with a dotted line to represent the magnetic field

    • Label the primary and secondary coils and indicate the direction of current flow

    • Include any additional components such as taps or shields

  • Answered by AI
  • Q2. What is crona? how do we prevent it in substation?
  • Ans. 

    Crona is not a known term in the context of substations. Please provide more information.

    • Crona is not a known term in the context of substations

    • It is important to use correct terminology when discussing technical topics

    • Preventing issues in substations involves proper maintenance and monitoring

    • Examples of issues that can occur in substations include equipment failure and power outages

  • Answered by AI
  • Q3. What the efficiency of power plant?
  • Ans. 

    The efficiency of a power plant is the ratio of output power to input power.

    • Efficiency is affected by factors such as fuel type, technology used, and maintenance.

    • Higher efficiency means less fuel is needed to produce the same amount of power.

    • Efficiency can be improved through upgrades and modifications to the plant.

    • Efficiency can be calculated using the formula: Efficiency = (Output Power / Input Power) x 100%

    • For examp...

  • Answered by AI
  • Q4. What is efficiency of transformer?
  • Ans. 

    Efficiency of transformer is the ratio of output power to input power.

    • Efficiency is an important parameter for transformers.

    • It is calculated as the ratio of output power to input power.

    • Efficiency is always less than 100% due to losses in the transformer.

    • Transformers with higher efficiency are preferred as they waste less energy.

    • Efficiency can be improved by using better materials and design.

    • For example, a transformer w...

  • Answered by AI
  • Q5. What are different kind of transmission wire used in transmission? why are they made of different metal?
  • Ans. 

    Different types of transmission wires are used in transmission made of different metals for their specific properties.

    • Copper wires are commonly used for their high conductivity.

    • Aluminum wires are used for long-distance transmission due to their lightweight.

    • Steel-cored aluminum wires are used for their strength and conductivity.

    • Aerial bundled cables are used for their insulation properties.

    • Different metals are used base...

  • Answered by AI
  • Q6. What is height of tower carrying 132kv ?
  • Ans. 

    The height of a tower carrying 132kv depends on various factors such as terrain, weather, and distance between towers.

    • The height of the tower is determined by the voltage it carries and the distance between towers.

    • The terrain and weather conditions also play a role in determining the height of the tower.

    • The height of the tower can range from 15 meters to over 50 meters depending on the above factors.

    • For example, in hil...

  • Answered by AI
  • Q7. How do you differentiate between a CT and PT visually in substation?
  • Ans. 

    CT and PT can be differentiated visually in substation by their size, shape, and labeling.

    • CTs are typically larger and cylindrical in shape, while PTs are smaller and more rectangular.

    • CTs are often labeled with a ratio, such as 100:5, while PTs are labeled with a voltage rating.

    • CTs are usually located on the high voltage side of the substation, while PTs are on the low voltage side.

    • CTs are used to measure current, whil

  • Answered by AI
  • Q8. How does single phase induction motor works?
  • Ans. 

    Single phase induction motor works on the principle of electromagnetic induction.

    • It has a stator and a rotor.

    • The stator has a single phase winding which produces a magnetic field.

    • The rotor is either squirrel cage or wound type.

    • When AC supply is given to the stator winding, it produces a magnetic field which induces a current in the rotor.

    • This current produces a magnetic field in the rotor which interacts with the stato...

  • Answered by AI
  • Q9. Was there any event you handled in you college life as a leader?
  • Ans. 

    Yes, I organized a technical fest in college as the head coordinator.

    • Planned and executed the entire event with a team of 20 members

    • Managed a budget of INR 5 lakhs and ensured timely payments to vendors

    • Coordinated with sponsors and invited industry experts as guest speakers

    • Handled logistics, marketing, and publicity of the event

    • Received positive feedback from participants and faculty members

  • Answered by AI
  • Q10. What is ISTE? How they work? How you contributed to it being an chairman of Durgapur Chapter
  • Ans. 

    ISTE is a national professional society for educators and students in engineering and technology fields.

    • ISTE stands for Indian Society for Technical Education

    • It is a non-profit organization that aims to improve technical education in India

    • As the chairman of Durgapur Chapter, I organized various workshops and seminars for students and faculty members

    • I also encouraged students to participate in technical competitions and...

  • Answered by AI
  • Q11. How would you handle a workman who is not complying with safety rules. And convince him with safety PPE?
  • Ans. 

    I would approach the workman and explain the importance of safety rules and PPE, and offer assistance if needed.

    • Approach the workman in a calm and respectful manner

    • Explain the safety rules and the importance of following them

    • Demonstrate the proper use of PPE and offer assistance if needed

    • Provide incentives for compliance, such as rewards or recognition

    • Document any incidents or non-compliance for future reference

  • Answered by AI
  • Q12. Do you have any problem with allocation at remote place in India?
  • Ans. 

    No, I am open to working in remote locations in India.

    • I am willing to explore new places and cultures.

    • I understand that remote locations may offer unique challenges, but I am up for the task.

    • I am excited about the opportunity to contribute to the company's growth and success, regardless of the location.

    • I am adaptable and can adjust to new environments quickly.

    • I believe that working in a remote location will provide me ...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: It was conducted by third party recruiters i.e asprining minds. Which every NITian and IITian are acquainted of.
Tips: Don't mark about which you are not sure, this will draw you negetive marks
Duration: 60 minutes
Total Questions: 1

Round: Technical Interview
Experience: Be confident answer what you know.The interviewer always has more technical knowledge than you
Tips: If you don't know and answering a approximate guess, always mention that you are guess before answering.

Round: HR Interview
Experience: They are searching for manager, so act like a manager and try to emphasis on your managerial skills.
Tips: Never say you have problem with allocation.

General Tips: BE A MANAGER
Skill Tips: Try being a manager than a engineer.
Skills: Techinically sound, Managerial skills
College Name: NIT DURGAPUR
Motivation: It is one of largest MNC in India operating for such a long time. Highest revenue grosser for ABG GROUP
Funny Moments: He had no idea about ISTE. So I manipulated the statistic and balance sheet data.

Interview Preparation Tips

Round: Test
Experience: Pure technical.
Study Physical Metallurgy and mechanical metallurgy... as well as Iron and Steel Making.
Duration: 60 minutes
Total Questions: 50

Round: Group Discussion
Experience: It is better to start gd. Give a good start. Whatever you speak, be confident and be loud. You should be very active during gd. Giving chance to the person who is silent throughout the gd will increase your point.

Round: Technical Interview
Experience: Question asked :
Name, position in class, project(industrial), about parents.
Corex process, Difference between corex and BF, Supply of O2 in Corex etc...
BF operations, RAFT, Temp. difference between slag and hot metal and reason for that difference, position of tuyers in bf and justify its position.
Types of steel in LD converter, Quenching medium and best quenchant.
Type of work you wish to do. How long you wish to work for this company, planning for further studies or not ..

General Tips: CPI is the most important thing. Along with CPI they also check weather the interviewee is having knowledge of basic things or not. In short CPI and knowledge both matters alot.
Skill Tips: Whatever you speak be confident in that. You should have very sound technical knowledge. Show interviewers that you are desperate to join their company. Sit straight and be bold and have confidence on yourself.
College Name: NIT RAIPUR

Interview Questionnaire 

7 Questions

  • Q1. Explain working of blast furnace
  • Ans. 

    Blast furnace is a large steel structure used to extract iron from its ore through a chemical process.

    • Raw materials like iron ore, coke, and limestone are fed into the furnace from the top.

    • Hot air is blown into the furnace from the bottom, which reacts with the coke to produce carbon monoxide.

    • Carbon monoxide reduces the iron ore to iron, which melts and collects at the bottom of the furnace.

    • The impurities in the iron o...

  • Answered by AI
  • Q2. What is ductility malleability
  • Ans. 

    Ductility and malleability are properties of materials to deform under stress without breaking.

    • Ductility is the ability of a material to be drawn into a wire without breaking.

    • Malleability is the ability of a material to be hammered or rolled into thin sheets without breaking.

    • Both properties are important in metalworking and manufacturing.

    • Examples of ductile materials include copper and gold.

    • Examples of malleable materi

  • Answered by AI
  • Q3. What is the iron content in pig iron
  • Ans. 

    The iron content in pig iron varies from 90-94% depending on the manufacturing process.

    • Pig iron is the product of smelting iron ore with a high-carbon fuel such as coke.

    • The iron content in pig iron is higher than in wrought iron or cast iron.

    • The iron content in pig iron can vary depending on the manufacturing process and the quality of the iron ore used.

    • The iron content in pig iron is typically between 90-94%.

  • Answered by AI
  • Q4. Use of pig iron
  • Ans. 

    Pig iron is a raw material used in the production of steel and iron products.

    • Pig iron is produced by smelting iron ore in a blast furnace.

    • It contains high amounts of carbon, silicon, and other impurities.

    • Pig iron is used as a raw material in the production of steel and iron products.

    • It is also used in the manufacturing of cast iron products such as pipes, stoves, and engine blocks.

  • Answered by AI
  • Q5. Where do we get coke from?
  • Ans. 

    Coke is obtained from coal by heating it in the absence of air.

    • Coke is a fuel with high carbon content and low impurities.

    • It is used in the production of iron and steel.

    • Coke is also used in the manufacture of electrodes, carbon brushes, and other carbon products.

    • The process of obtaining coke is called coking.

    • Coking coal is the type of coal used for coking.

    • Coke is produced by heating coking coal in the absence of air at...

  • Answered by AI
  • Q6. What is the common utensil grade Aluminium?
  • Ans. 

    The common utensil grade Aluminium is 3003 Aluminium.

    • 3003 Aluminium is a non-heat treatable alloy

    • It has excellent workability and is highly resistant to corrosion

    • It is commonly used in kitchen utensils, food and chemical handling equipment, and storage tanks

  • Answered by AI
  • Q7. Can thermal coke be used in BF?
  • Ans. 

    Yes, thermal coke can be used in BF as a fuel and reducing agent.

    • Thermal coke is a byproduct of coal tar and is used as a fuel and reducing agent in blast furnaces.

    • It has a high carbon content and low ash content, making it an ideal choice for BF.

    • Thermal coke is cheaper than metallurgical coke and can be used as a substitute in some cases.

    • However, its use is limited due to its high sulfur content, which can lead to env...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: There are a set conditions laid by the company.There shouldn't be any gap between 10th and 12th. Maximum of one year gap between 12th and B.tech.Everyone above 60% score o

Round: Test
Experience: Test was easy.Basic questions on work, Permutations and combinations, Relations, Directions, Upstream-downstream, coding-decoding, Profit-loss, simple Logical questions, 2 GK questions , 3 data interpretation sets each having 5 questions.Total of 35 questions and time allotted was 45 minutes.
Tips: Refer R.S.Aggarwal.
Duration: 45 minutes
Total Questions: 35

Round: Group Discussion
Experience: It's a healthy group discussion.I spoke frequently and didn't cut others while they are speaking.I defended my stand in every circumstance.
Tips: Read any English news paper. Some knowledge about the topic comes in handy.
Duration: 15 minutes

Round: Technical Interview
Experience: Questions related to my branch (Metallurgical and materials engineering) were asked. I answered some of them. Remaining questions I said i don't know.
Tips: Be honest and polite.If u can make until interview, there is a high chance of getting through.

Skill Tips: Know ores, extraction steps and processes of Zn,Pb,Fe,Cu, Al
Skills: Ferrous and non ferrous metallurgy
College Name: NIT Surathkal
Motivation: Vedanta is a diversified company and its operations are related to my core skills.

I applied via Campus Placement and was interviewed before Dec 2015. There were 5 interview rounds.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume Shortlist Criteria :- Grades above 60%

Round: Group Discussion
Experience: 2-3 minute time to gather your thoughts
Rest of the time for GD

Round: Technical + HR Interview
Tips: Be prepared on your internships and projects
Go through the vedanta website without fail, and understand their bussiness

Skills: Technical Questions, HR Skills, Management Skills
College Name: IIT Madras

I applied via Campus Placement and was interviewed in Dec 2016. There were 6 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Tell us aboujt yourself (HR)
  • Ans. 

    I am a recent graduate with a degree in engineering, eager to learn and grow in a professional environment.

    • Recent graduate with a degree in engineering

    • Passionate about learning and growing in a professional environment

    • Strong communication and problem-solving skills

    • Previous internships or projects related to engineering field

  • Answered by AI
  • Q2. Technical Questioning on your Internships and projects
  • Q3. Technical questioing on courses adjacent to your Internships and projects
  • Q4. Resume Run through (PORs, etc to be elaborated)
  • Q5. Strength and weaknesses (HR)

Interview Preparation Tips

Round: Resume Shortlist
Experience: Grades cutoff : 60%

Round: Group Discussion
Experience: 2-3 minutes prep time
10-12 minutes GD (Conclusion expected)
Duration: 15 minutes

Round: Technical + HR Interview
Tips: Be prepared on your Projects and internships
Read through the compay website and understand their bussiness

Skills: Technical Questions, Management & Tendering Process, Management Skills, Technical Skill And Speaking Skill, How Well Do You Speak When Your Mistakes And Weak Points Are Pointed Out
College Name: IIT Madras
Contribute & help others!
anonymous
You can choose to be anonymous

Nalco Interview FAQs

How many rounds are there in Nalco Graduate Engineer Trainee (Get) interview?
Nalco interview process usually has 2 rounds. The most common rounds in the Nalco interview process are Resume Shortlist.
What are the top questions asked in Nalco Graduate Engineer Trainee (Get) interview?

Some of the top questions asked at the Nalco Graduate Engineer Trainee (Get) interview -

  1. What are the subjects in 4th Sem of BTech in your branc...read more
  2. What is CRO and it works? What is voltmeter, ammeter, potentiometer, rectifier...read more
  3. Tell me something about NALCO and what is the procedure to produce allumin...read more

Recently Viewed

INTERVIEWS

Mando Automotive

No Interviews

LIST OF COMPANIES

Mando Automotive

Locations

INTERVIEWS

Mando Automotive

No Interviews

SALARIES

Vishnu Chemicals

INTERVIEWS

Vishnu Chemicals

No Interviews

INTERVIEWS

Vishnu Chemicals

No Interviews

INTERVIEWS

Nalco

No Interviews

INTERVIEWS

Mando Automotive

No Interviews

INTERVIEWS

Vishnu Chemicals

No Interviews

LIST OF COMPANIES

Vishnu Chemicals

Locations

Tell us how to improve this page.

Nalco Graduate Engineer Trainee (Get) Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Fast track your campus placements

View all
Nalco Graduate Engineer Trainee (Get) Salary
based on 8 salaries
₹7 L/yr - ₹16.8 L/yr
184% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Nalco Graduate Engineer Trainee (Get) Reviews and Ratings

based on 3 reviews

4.7/5

Rating in categories

4.9

Skill development

4.9

Work-life balance

4.7

Salary

4.7

Job security

4.9

Company culture

4.9

Promotions

4.9

Work satisfaction

Explore 3 Reviews and Ratings
Deputy Manager
37 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
32 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
17 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant General Manager
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Nalco with

Hindalco Industries

4.2
Compare

Vedanta Limited

3.8
Compare

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview