Upload Button Icon Add office photos

Filter interviews by

MNC AUTOMATION Automation Engineer Interview Questions and Answers

Updated 18 Feb 2023

MNC AUTOMATION Automation Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. (1) GEneral introduction about yourself.
  • Q2. Knowledge about automation

Interview Preparation Tips

Interview preparation tips for other job seekers - (1) BASIC KNOWLEDGE ABOUT AUTOMATION.
(2) WORK EXPERIENCE

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

My name is Amarendra Pratap Singh Yadav

Round 2 - Technical 

(3 Questions)

  • Q1. Pannel wiring,PLC,SCADA, HMI
  • Q2. SCADA full name Supervisory Controller And Data Acquisition
  • Q3. HMI full name HMI is a hardware and software device

Interview Preparation Tips

Topics to prepare for Rockwell Automation Automation Engineer interview:
  • Siemens PLC
  • SCADA Designing
  • HMI Programming
  • Pannel wiring
  • RLC
Interview preparation tips for other job seekers - My name is Amarendra Pratap Singh Yadav.My highest qualification diploma in electrical engineering 2023 passout . Mobile number XXXXX
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Types of communication protocols
  • Ans. 

    Communication protocols are rules and standards for data exchange between devices.

    • TCP/IP

    • HTTP

    • FTP

    • SMTP

    • Modbus

  • Answered by AI
  • Q2. Difference between Sink vs source
  • Ans. 

    Sink is a destination where data is sent, while source is where data originates from.

    • Sink receives data, while source sends data

    • Sink is typically the end point in a data flow, while source is the starting point

    • Examples: Sink - Database, Source - Sensor

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

All the aptitude type questions and bar, graph type questions

Round 2 - HR 

(3 Questions)

  • Q1. Communication and project, problem solving skills
  • Q2. Introduces your self, and college project
  • Q3. Are you ready to relocate

I applied via Naukri.com and was interviewed in Sep 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Types of communication protocols, knowledge of plc, scada and HMI.i was also asked about anolog 2 wire, 3 wire and 4 wire connection methods.

Interview Preparation Tips

Interview preparation tips for other job seekers - There's a two year bond if you're joining the company.

I applied via Walk-in and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Machine Building 

(3 Questions)

  • Q1. What is PLC (Programmable logic controller)?
  • Ans. 

    PLC is a digital computer used for automation of electromechanical processes in industries.

    • PLC is a hardware device that receives inputs from sensors and other devices, processes them using a program, and then generates outputs to control machines or processes.

    • It is used in industries for automation of various processes such as assembly lines, packaging, and material handling.

    • PLCs can be programmed using ladder logic, ...

  • Answered by AI
  • Q2. Programmable logic controller
  • Q3. What are the different types of valves?
  • Ans. 

    Valves are devices used to control the flow of fluids or gases. There are several types of valves used in different applications.

    • Gate valves

    • Globe valves

    • Ball valves

    • Butterfly valves

    • Check valves

    • Diaphragm valves

    • Needle valves

    • Pinch valves

    • Pressure relief valves

    • Solenoid valves

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Titan Engineering & Automation Automation Engineer interview:
  • Industrial Automation
  • Automation Testing
  • Pneumatic System
  • Siemens PLC
Interview preparation tips for other job seekers - Greater skill/experience in automation can be leveraged

Skills evaluated in this interview

Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Coding Test 

Hackrank question based on array and srng

Round 2 - Technical 

(1 Question)

  • Q1. Coding round based on dsa'

I applied via Recruitment Consultant and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All basic and fundamental programming questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice interview. Very decent questions were asked.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 
Round 3 - Technical 

(1 Question)

  • Q1. What is the difference between 2d and 3d
  • Ans. 

    2D refers to two-dimensional objects or images, while 3D refers to three-dimensional objects or images.

    • 2D objects have length and width, while 3D objects have length, width, and depth

    • 2D images are flat, while 3D images have depth and can be viewed from different angles

    • 2D objects can be represented on a piece of paper or screen, while 3D objects require special software or equipment to view

    • Examples of 2D objects include...

  • Answered by AI
Round 4 - HR 

(2 Questions)

  • Q1. What about your self
  • Ans. 

    I am an experienced Automation Engineer with a strong background in developing and implementing automated testing solutions.

    • I have a deep understanding of various automation tools and frameworks such as Selenium, Appium, and Robot Framework.

    • I have successfully designed and executed automated test scripts for web applications, mobile apps, and APIs.

    • I am proficient in programming languages like Java, Python, and JavaScri...

  • Answered by AI
  • Q2. Who is president of india an today lastest news
  • Ans. 

    The President of India is Ram Nath Kovind. The latest news is not available.

    • The current President of India is Ram Nath Kovind.

    • There is no specific latest news mentioned in the question.

  • Answered by AI
Round 5 - Technical 

(3 Questions)

  • Q1. Why u are working on here
  • Ans. 

    I am working here because I am passionate about automation and enjoy solving complex problems.

    • I have a strong background in automation engineering and enjoy applying my skills to improve efficiency and productivity.

    • I find satisfaction in developing automated solutions that streamline processes and reduce human error.

    • I am motivated by the opportunity to work with cutting-edge technologies and contribute to the advanceme...

  • Answered by AI
  • Q2. What is best employee Aim for our company
  • Ans. 

    The best employee aim for our company is someone who is highly skilled in automation engineering and has a strong work ethic.

    • Highly skilled in automation engineering

    • Strong work ethic

    • Ability to work independently and as part of a team

    • Excellent problem-solving and troubleshooting skills

    • Attention to detail and accuracy

    • Continuous learning and adaptability

    • Effective communication and collaboration

    • Ability to meet deadlines an

  • Answered by AI
  • Q3. When established this company are known

Interview Preparation Tips

Interview preparation tips for other job seekers - i am working Wipro pari team such a great experience in my life

Skills evaluated in this interview

I applied via Walk-in and was interviewed in Feb 2021. There were 4 interview rounds.

Interview Questionnaire 

9 Questions

  • Q1. What is Automation?
  • Ans. 

    Automation is the use of technology to perform tasks without human intervention.

    • Automation involves the use of software, hardware, and other technologies to perform tasks.

    • It can be used to increase efficiency, reduce errors, and save time and money.

    • Examples include automated manufacturing processes, robotic assembly lines, and automated testing.

    • Automation can also be used in industries such as finance, healthcare, and ...

  • Answered by AI
  • Q2. Which language use in plc program?
  • Ans. 

    PLC programs can be written in various languages such as ladder logic, structured text, function block diagram, and sequential function chart.

    • Ladder logic is the most commonly used language in PLC programming.

    • Structured text is similar to programming languages like C and Pascal.

    • Function block diagram uses graphical blocks to represent functions.

    • Sequential function chart is used for complex processes with multiple steps...

  • Answered by AI
  • Q3. How many types of PLC and what are it's communication protocol.
  • Ans. 

    There are various types of PLCs with different communication protocols.

    • PLC types include Programmable Logic Controller, Compact Programmable Logic Controller, Modular Programmable Logic Controller, and more.

    • Communication protocols include Modbus, Profibus, DeviceNet, Ethernet/IP, and more.

    • The type of PLC and communication protocol used depends on the specific automation application.

    • PLCs can communicate with other devic...

  • Answered by AI
  • Q4. What is VFD?
  • Ans. 

    VFD stands for Variable Frequency Drive.

    • It is an electronic device that controls the speed of an AC motor by varying the frequency of the electrical supply to the motor.

    • It is used to save energy and improve process control in industrial applications.

    • VFDs are commonly used in HVAC systems, pumps, fans, and conveyors.

    • They can also be used to control the speed of electric vehicles and wind turbines.

  • Answered by AI
  • Q5. Why we use VFD?
  • Ans. 

    VFD is used to control the speed of AC motors and save energy.

    • Variable frequency drive (VFD) is used to control the speed of AC motors.

    • It saves energy by adjusting the motor speed to match the load requirements.

    • VFDs also provide soft start and stop, reducing mechanical stress on the motor.

    • They can improve process control and reduce maintenance costs.

    • Examples of VFD applications include HVAC systems, pumps, and conveyor

  • Answered by AI
  • Q6. How to select a VFD according to motor ?
  • Ans. 

    VFD selection depends on motor voltage, current, and power rating.

    • Check motor nameplate data for voltage, current, and power rating

    • Select VFD with compatible voltage and current rating

    • Ensure VFD power rating is equal to or greater than motor power rating

    • Consider additional features such as overload protection and communication protocols

    • Consult manufacturer's specifications and guidelines

  • Answered by AI
  • Q7. What is scada ?
  • Ans. 

    SCADA stands for Supervisory Control and Data Acquisition. It is a system used for monitoring and controlling industrial processes.

    • SCADA systems are used in various industries such as oil and gas, water treatment, and manufacturing.

    • They collect data from sensors and other devices and display it in a graphical interface for operators to monitor.

    • SCADA systems can also be used to control processes remotely, such as turnin...

  • Answered by AI
  • Q8. What is ohms law ?
  • Ans. 

    Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points.

    • Ohm's law is a fundamental law of electrical engineering.

    • It states that the current through a conductor is directly proportional to the voltage across it.

    • The proportionality constant is the resistance of the conductor.

    • The formula for Ohm's law is I = V/R, where I is the current, V is th...

  • Answered by AI
  • Q9. How to calculate power factor?
  • Ans. 

    Power factor is the ratio of real power to apparent power in an AC circuit.

    • Power factor = Real power / Apparent power

    • It is measured in a scale of 0 to 1 or 0 to 100%

    • A power factor of 1 means all the power is being used efficiently

    • A power factor of less than 1 means some power is being wasted

    • Capacitors can be used to improve power factor

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

Skills evaluated in this interview

MNC AUTOMATION Interview FAQs

How many rounds are there in MNC AUTOMATION Automation Engineer interview?
MNC AUTOMATION interview process usually has 2 rounds. The most common rounds in the MNC AUTOMATION interview process are Resume Shortlist and HR.

Tell us how to improve this page.

MNC AUTOMATION Automation Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 416 Interviews
Bosch Interview Questions
4.2
 • 329 Interviews
Johnson Controls Interview Questions
3.5
 • 261 Interviews
ABB Interview Questions
4.1
 • 233 Interviews
Falcon Autotech Interview Questions
3.9
 • 44 Interviews
View all
MNC AUTOMATION Automation Engineer Salary
based on 12 salaries
₹2 L/yr - ₹4.2 L/yr
52% less than the average Automation Engineer Salary in India
View more details

MNC AUTOMATION Automation Engineer Reviews and Ratings

based on 2 reviews

4.0/5

Rating in categories

5.0

Skill development

3.5

Work-life balance

3.5

Salary

4.0

Job security

5.0

Company culture

4.5

Promotions

4.5

Work satisfaction

Explore 2 Reviews and Ratings
Automation Engineer
12 salaries
unlock blur

₹2 L/yr - ₹4.2 L/yr

Senior Manager Credit Control
9 salaries
unlock blur

₹26 L/yr - ₹34.2 L/yr

Quality Engineer
6 salaries
unlock blur

₹1 L/yr - ₹2.2 L/yr

Junior Engineer
6 salaries
unlock blur

₹2.7 L/yr - ₹3.2 L/yr

Production Engineer
5 salaries
unlock blur

₹2 L/yr - ₹8.9 L/yr

Explore more salaries
Compare MNC AUTOMATION with

Siemens

4.1
Compare

ABB

4.1
Compare

Schneider Electric

4.1
Compare

Rockwell Automation

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview