Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by MN Engineering Solutions Team. If you also belong to the team, you can get access from here

MN Engineering Solutions Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

MN Engineering Solutions Interview Questions and Answers

Updated 17 Mar 2025

MN Engineering Solutions Interview Experiences

Popular Designations

4 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jan 2023. There were 7 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General HR questions
Round 3 - One-on-one 

(1 Question)

  • Q1. Preliminary related to technical basics
Round 4 - Assignment 

Tool test and technical questionnaire

Round 5 - Technical 

(1 Question)

  • Q1. Technical questionnaire face to face
Round 6 - HR 

(1 Question)

  • Q1. Final HR round related to salary
Round 7 - One-on-one 

(1 Question)

  • Q1. Final one on one with higher level

Senior Design Engineer Interview Questions asked at other Companies

Q1. Noise, Vibration, and Harshness (NVH) in gearboxes are influenced by several factors, which can broadly be categorized into design, material, manufacturing, and operational factors. Here are some key factors affecting NVH in gearboxes: ### ... read more
View answer (1)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Indeed and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. About your previous work experience and some technical question s
Round 2 - Face to face 

(1 Question)

  • Q1. Tell about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Good place to work for fresher and experienced persons

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. About Experience
  • Q2. Questions about handling situations

Business Development Manager and Team Lead Interview Questions asked at other Companies

Q1. Sales target that you achieve last time how much that was.
View answer (1)

I appeared for an interview in Jan 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Some coding questions Basic automotive concepts Testing topics as per ISTQB
Round 3 - HR 

(1 Question)

  • Q1. General questions about background Salary Negotiations

Interview Preparation Tips

Interview preparation tips for other job seekers - Have a broad understanding of ASPICE process, technical understanding of the product that you worked on previously.

Team Leader (Technical) Interview Questions asked at other Companies

Q1. What is OSG what is v3f What DBG Divert wheel U r V shape best What will take in first site visit and what will customer side need What is use of divert wheel What is sap technology How is lop and cop working
View answer (1)

MN Engineering Solutions interview questions for popular designations

 Team Leader (Technical)

 (1)

 Business Development Manager and Team Lead

 (1)

 Design Engineer

 (1)

 Senior Design Engineer

 (1)

Jobs at MN Engineering Solutions

View all

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Normal introduction was asked
  • Q2. Description of the previous role
  • Q3. Roles and responsibilities
Round 3 - Aptitude Test 

Not applicable , this was final round

Interview Preparation Tips

Interview preparation tips for other job seekers - Work hard on your attitude, skills can be taught! Focus on your goal.

I applied via Walk-in and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 
Round 3 - Coding Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - Company is more focused on MySQL queries.
Coding questions mostly related to arrays.

Interview Questionnaire 

1 Question

  • Q1. Round 1: This round is about technical related to Embedded C, Communication protocols and project related questions etc..,

Interview Preparation Tips

Round: Resume Shortlist
Experience: CV should focus on the skill set previously mentioned. Concise and to the point sentences. Line out projects and internships well. Balance between academia and extra curriculars. Attend the CV making workshop of Opera and work on it accordingly.
Tips: Don’t put things totally irrelevant to the job profile. Don’t write long sentences. Know your CV well for further stages.Anything related to your CV should be at the tip of your tongue.

Round: Test
Experience: Don’t spend a lot of time on one question in quant section. There’s a cut-off in Quant and your focus should be on clearing it. If you clear the cut-off, the puzzle section will be evaluated, where solving at least 2 is generally good enough. Puzzles are hard, and need a lot of prior practice.

Round: HR Interview
Experience: Direct selections take place at the end of all interviews after a mutual discussion between all the panels. Know your CV thoroughly. Prepare for some HR questions as well. Puzzle solving and guesstimates are asked, so prepare them well. When you are asked a puzzle, do not sit quietly but think aloud. The interviewers help you structure your thoughts. Most of the times, just knowing your approach is enough for them
Tips: Evaluate the nature of your interviewer for the first 5 minutes and if possible treat the interview like a discussion. They just want to know more about you so tell it to them. Most of them are very friendly, and you will feel at ease. Be confident. Sound excited while talking about your projects/internships. It gives them confidence in you. Be very very thorough with your CV. Nothing gives a bad impression like not knowing about yourself. Ask questions if you have them at the end of the interview.

General Tips: 1: Be Confident.
2: Keep Smiling.
3: Do not be Panic.
4: Remember they are here to hire you but not reject you.
5: Do not loose hope.
6: Believe at yourself.
7: Start preparing early.
8: Do demo interviews with your friend.
Skills: Mathematics, Computer Science
College Name: IIT KHARAGPUR
Motivation: Every body joins a comapny for making a software or earning money. But I was always motivated to MAKE MONEY. I have taken this job because they have very extensive work in Share Market and they have lots of MBA from IIM's, Lots of CAs, CS. Thats why i have choosen Edelweiss. I have rejected epic System USA for this profile.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I started preparing my resume somewhere around August end. I spoke to a few seniors about it and read quite a few resumes, especially of those seniors who either had a profile similar to mine or had secured jobs in fields of my interest, eg. Consulting, finance, etc. I also attended the Resume Writing Workshop conducted by McKinsey and Co. on campus and cleared a few doubts there.
Tips: I would advise you guys to start preparing your resumes well in advance, it is not something to be kept for the last minute. Being the first form of acquaintance between you and a firm, it is a highly important document and the way you highlight your strong points and attributes can go a long way in shortlisting you from amongst the hundreds of resumes that they have to scan. Also, it is important that you be able to speak on any point in your resume in detail, hence you must be sure of what you are writing in it.

Round: Case Study Interview
Experience: The procedure of selection for Opera Solutions was a set of 4 interviews, each having a case study and some HR questions. The initial shortlist had around 22 candidates, after the first 2 interviews around 10 candidates were selected for the final rounds. Finally 3 candidates were made offers.  There were no GDs, only case interviews. The first interview had a case involving a music company which scouts for amateur talent and launches them. They want to enter India and want you to analyse the market and suggest if its feasible or not. The interviewer gave a lot of data related to market share of pop music, bollywood, devotional music, etc and it suggested that the market share of the genre related to the company is very little. However I think what worked best was that I also pointed out certain solutions which could make it feasible, such as merging with another company in a genre where the given company has core competencies in. I think this was the high point of the interview which I atleast would like to believe compensated for a later interview that I did not do well in. Another interview had a case where a pharmaceutical company in the US wants to enter India. A set of constraints and data was given and I was asked to calculate if it should actually setup a manufacturing facility in India or manufacture in the US and transport to India. I did not do well in this one, I wasn’t being able to come up with a figure. Both the interviews had an HR component where I was asked about my strengths and weaknesses, about Mood Indigo and my academic record. I was asked to describe myself. I was also asked to talk about my co-intern’s project in ITC (she was also interviewing with Opera). In a subsequent interview after the shortlist, I was asked to estimate the market for Maruti cars, domestic air travel. They weren't expecting too much detail, the interviewer was more interested in the approach. point.
Tips: I attended most of the initial PPTs. One does get a good understanding of what a firm does and where exactly do you fit into it, you also understand what they are looking for and what is the extent of their operations. I must admit though that I found my interaction with seniors, especially those working in those firms was more informative and fruitful. They can give clarity in certain grey areas that companies might stay non-committal on.ending across links/documents would help us compile a single point resource) . I prepared for case studies from the material I took from seniors, most of which is available on the LAN. For case studies I prepared with a friend and sometimes in groups of 3. I think this method is better than individual preparation because the other person can point out where you are going wrong, you get a different perspective and at the same time you can prepare in a fashion where one interviews the other and vice versa, so you get slightly comfortable with how an actual interview might feel like. It is however important to ensure that the person you are preparing with is competent and complementary to your skill sets, so that you can improve upon aspects where you might be lacking in.

General Tips: Case studies and HR questions. One should be very comfortable with points mentioned in the resume and should be able to talk at length about any . I guess it'd just be shifting a little from being myself if you know what I mean. A lot of seniors would give you a lot of fundae, but at the end one must remember that unless one is comfortable with a certain way of speaking or certain method of solving cases, it wont look genuine. For example, one need not thrash out every single detail of a case before beginning to solve it, sometimes the interviewer might get impatient or might think you are trying to buy time to think by asking unnecessary details. So if you are the kind of a person who can intuitively draw good conclusions at the outset so as to decide which direction to proceed in and hence which questions to ask, you can surely go ahead and do that, you need not also ask questions that you know are not required. Case interviews are very feel-good interviews, even if you make a mistake you will be guided back on track by the interviewer, hence I personally would recommend that you stick more to your general approach to solving cases (if you know it is a good one and works of course) and not try to change too much just because a certain senior did it in a different way.
College Name: IIT BOMBAY

Analyst Interview Questions & Answers

ElectrifAi user image Himanshu Sharma

posted on 26 Mar 2015

Interview Preparation Tips

Round: Resume Shortlist
Tips: Resume building is the most important of all steps. Keep it concise and to the point.

Round: Test
Experience: Puzzles
Tips: Practice as many puzzles as possible

Round: Stress Interview
Tips: Keep your cool, divert interview towards your strong zones

Round: Technical Interview
Experience: Guesstimates (basic level) and puzzles. Also know your resume and courses well

General Tips: They want to check your thinking, try every problem given in interview. They would have simple solutions.
Skills: Critical Thinking
College Name: IIT DELHI
Motivation: Application of statistics

MN Engineering Solutions Interview FAQs

How many rounds are there in MN Engineering Solutions interview?
MN Engineering Solutions interview process usually has 3-4 rounds. The most common rounds in the MN Engineering Solutions interview process are Technical, HR and Resume Shortlist.
How to prepare for MN Engineering Solutions interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at MN Engineering Solutions. The most common topics and skills that interviewers at MN Engineering Solutions expect are Adobe Creative Suite, Machine Design, Solid Works, Adobe After Effects and Adobe Premiere Pro.
What are the top questions asked in MN Engineering Solutions interview?

Some of the top questions asked at the MN Engineering Solutions interview -

  1. Some coding questions Basic automotive concepts Testing topics as per IS...read more
  2. Final one on one with higher le...read more
  3. Preliminary related to technical bas...read more

Tell us how to improve this page.

MN Engineering Solutions Interview Process

based on 3 interviews

Interview experience

4.7
  
Excellent
View more

Interview Questions from Similar Companies

CGS Interview Questions
3.5
 • 25 Interviews
ElectrifAi Interview Questions
2.7
 • 17 Interviews
Fusion Interview Questions
3.3
 • 17 Interviews
View all

MN Engineering Solutions Reviews and Ratings

based on 3 reviews

3.7/5

Rating in categories

4.4

Skill development

5.0

Work-life balance

4.4

Salary

3.8

Job security

4.4

Company culture

3.8

Promotions

4.4

Work satisfaction

Explore 3 Reviews and Ratings
Ui Ux Developer

Chennai

1-3 Yrs

Not Disclosed

Explore more jobs
Design Engineer
4 salaries
unlock blur

₹2.2 L/yr - ₹4.2 L/yr

Project Manager
4 salaries
unlock blur

₹7.7 L/yr - ₹10.4 L/yr

Senior Design Engineer
4 salaries
unlock blur

₹5 L/yr - ₹9 L/yr

Business Development Manager
4 salaries
unlock blur

₹10 L/yr - ₹14 L/yr

Technical Project Manager
3 salaries
unlock blur

₹12 L/yr - ₹15.7 L/yr

Explore more salaries
Compare MN Engineering Solutions with

Primus Global Technologies

3.9
Compare

TriGeo Technologies

3.2
Compare

GrapplTech

4.8
Compare

Plada Infotech Services

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview