AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
MN Dastur & Company Graduate Engineer Trainee (Get) Interview Questions and Answers for Freshers
MN Dastur & Company Graduate Engineer Trainee (Get) Interview Experiences for Freshers
1 interview found
I was interviewed in Oct 2016.
Interview Questionnaire
2 Questions
- Q1. FOR ABOUT AN HOUR
- Q2. FOR 30 MINUTES
Interview Preparation Tips
Experience: THEY DO DETAILED ANALYSIS OF CLASS 10 AND 12 MARKS. AT LEAST 80% WAS NECESSARY DURING MY TIME
Round: Test
Experience: RELATIVELY EASY QUESTIONS INCLUDING MATHS, ENGLISH AND REASONING BASED QUESTIONS.
IN TECHNICAL DESCRIPTIVE AS WELL AS MCQ WAS ASKED. DIAGRAMS WERE GIVEN TO DRAW. QUESTIONS WERE ASKED A-Z OF THE BRANCH FOR WHICH YOU APPLY.
Duration: 1 hour 30 minutes
Total Questions: 40
Round: Technical Interview
Experience: DETAILED QUESTIONS OF MY DEPARTMENT(METALLURGY AND MATERIALS) WAS ASKED. THE INTERVIEWER WAS FRIENDLY. HE KEPT MOTIVATING ME. I WAS EVEN GIVEN TO DRAW DIAGRAMS AND GRAPHS. QUESTIONS ABOUT INTERNSHIPS AND TRAINING WERE ASKED.
Round: HR Interview
Experience: GENERAL QUESTIONS LIKE WHY U WANT TO JOIN, FAMILY BACKGROUND, STRENGTH AND WEAKNESSES, LEADERSHIP ABILITIES, IF U GET BETTER OPTIONS LIKE GATE PSU'S ETC. RELATIVELY EASY
College Name: NIT DURGAPUR
Top trending discussions
Interview questions from similar companies
Graduate Engineer Trainee (Get) Interview Questions & Answers
TechnipFMC
Anonymous
posted on 2 Oct 2022
(1 Question)
- Q1. Design, fluid, basic subjects
(1 Question)
- Q1. Basic hr questions like tell me about the company
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions & Answers
TechnipFMC
Anonymous
posted on 9 Oct 2022
Quantitative aptitude , Logical reasoning
Non elimination round, 7 persons were there
(1 Question)
- Q1. Questions related to Heat exchanger, Strength of material, Fluid Mechanics, Pumps
(2 Questions)
- Q1. Introduction , Strength
- Q2. Do you have a experience in Public Speaking, Questions on extra curricular
Interview Preparation Tips
Interview Preparation Tips
Experience: Round 1: MCQs: tech + apti
Round: Other Interview
Experience: Round 2: Interviews; (a) Tech (b) HR
General Tips: It was a Good experience! Tech questions asked were not very difficult, nor too easy, exactly how an interview should be. They were chilled out but smart people. They didn't believe in stress interview, etc. but their questions were direct and logical.
Skill Tips: Don't go for books for last minute brush up. First go through the codes, (456,800). Also, for environmental- the lab manual! Books and Shri Hari notes would be too much for last hours, but the lab manuals have all the necessary and important procedures, and also limits of various pollutants/minerals as specified by the codes. Very helpful for last minute work. Sitaram sir's notes for soil mech should be sufficient. All these done, 1st round should be a cakewalk. Also, there is no harm in saying "I don't know", (not for all the questions of course!). Don't try to give round-about or approximate answers in tech interview. That is not appreciated. They don't expect you to know everything they ask. Just be polite and say "I don't know", but mention that you'll make it a point to learn and understand those topics before you join the company. (Limit State Design for SteelStructures is a big example. We're taught Working Stress, which is now obsolete except for bridge design. Just say that you were not taught, and that you'll read it on your own before you join!)
Skills: RCC Structures, Apti, Quantitative Aptitude, IS codes, Tech question
College Name: NIT SURATHKAL
Graduate Engineer Trainee (Get) Interview Questions & Answers
Jacobs Engineering Group
Anonymous
posted on 8 Jul 2017
I was interviewed in Oct 2016.
Interview Questionnaire
3 Questions
- Q1. Tell us about yourself
- Ans.
I am a recent graduate with a degree in engineering, seeking a trainee position to apply my knowledge and skills.
Recent graduate with a degree in engineering
Seeking a trainee position
Knowledge and skills in engineering
Motivated and eager to learn
Strong problem-solving and analytical skills
- Q2. What did you learn during your internships?
- Ans.
During my internships, I learned various technical skills and gained practical experience in engineering projects.
Developed proficiency in using engineering software and tools
Enhanced problem-solving and critical thinking abilities
Improved communication and teamwork skills
Learned to apply theoretical knowledge to real-world projects
Gained insights into industry practices and standards
- Q3. Questions based on the assignment I did in my internship
Interview Preparation Tips
Experience: The test was in MCQ format for both technical and aptitude & general knowledge sections. The difficulty level was average. There were around 5 general knowledge/current affairs questions. About 15 quantitative aptitude questions and 20 technical questions from subjects taught till 6th semester. 11 out of 18 students were shortlisted for the next round.
Tips: Brush up your basics in all the major subjects. Refer quantitative aptitude books and practice every type of sums.
Duration: 1 hour
Total Questions: 40
Round: Group Discussion
Experience: All 11 shortlisted students were part of the same GD. We were given 5 topics out of which we had to decide on unanimously. All the topics were general/social in nature and not related to current affairs of the world. 10 mins are given after the selection of the topic to think and jot down the points. The first person to start speaking has to introduce the topic and then start to put his point. There should also be a consensus during the end.
Tips: Use your initial 10 mins well. Write down all the points for both for and against of the topic. You need not necessarily stick to one aspect. Don't speak too much or too less. Just the apt! Give chance to others as well but at the same time don't hesitate and hold yourself back. You can also say "I agree with this but I would also add.." or " I disagree with this point, I feel...". But these statements should be very polite.
Duration: 30 minutes
Round: Technical + HR Interview
Experience: 8 students out of 11 were shortlisted for this round. This round was individual interview by a panel of two of company's officials. They asked questions from different sections to all the students. Some of them were asked application based questions for example is it easier to dry clothes in hot and humid outside than in an air conditioned room, what is the use of psychrometric charts, is cooling tower efficient. In my case the questions were based on my internships. I did my internships from consultancies like Jacobs so they asked my about basic documents used in the those companies and also about my assignments that I did.
Tips: Basics are very important in this round and so is your internships, project(if any). Keep your mind open while answering, workout all the conditions in your mind related to the question.
College Name: Thadomal Shahani Engineering College
Graduate Engineer Trainee (Get) Interview Questions & Answers
Larsen & Toubro Limited
Mitesh Lalwala
posted on 10 Feb 2015
Interview Questionnaire
2 Questions
- Q1. Give name of first 20 elements of periodic table
- Ans.
The first 20 elements of the periodic table are essential building blocks of matter.
The first element is Hydrogen (H)
The second element is Helium (He)
The third element is Lithium (Li)
The fourth element is Beryllium (Be)
The fifth element is Boron (B)
The sixth element is Carbon (C)
The seventh element is Nitrogen (N)
The eighth element is Oxygen (O)
The ninth element is Fluorine (F)
The tenth element is Neon (Ne)
The eleventh...
- Q2. What is laminar flow and tubulent flow?
- Ans.
Laminar flow is a smooth, orderly flow of fluid while turbulent flow is a chaotic, irregular flow.
Laminar flow occurs at low velocities and is characterized by layers of fluid moving parallel to each other.
Turbulent flow occurs at high velocities and is characterized by eddies and swirls in the fluid.
Laminar flow is commonly observed in blood vessels while turbulent flow is observed in rivers and oceans.
The transition ...
Interview Preparation Tips
Experience: Good
Tips: Focus on basic
Duration: 3 hrs minutes
Total Questions: 150
Round: Group Discussion
Experience: Good
Tips: Express your Idea clearly.
Don,t go with the mass flow or change your opnion during discussion.
Give chance to other people to express their idea.
Adhere to your beliveing and strengthen your points with solid proof or example.
Round: Technical Interview
Experience: Good
Tips: Keep calm and don't get nervous.
Don't get worried if you do not know some answer.
If you don't to answer say politely that you don't know answer rather than giving wrong answer.
Skills: Technical knowledge, Problem solving capability, Communication skills, Under stress workability
College Name: SVNIT
Motivation: L&T is one of the leading company in the field of the heavy metal engineering.
It can give you good knowledge of working in the heavy metal industries.
Graduate Engineer Trainee (Get) Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 13 Feb 2015
Interview Questionnaire
1 Question
- Q1. Tell me about yourself?
Interview Preparation Tips
Experience: Most of the questions are not so difficult.
Duration: 60 minutes
Round: Technical Interview
Experience: As Iam a Electrical student, I was asked questions on Transformers(like transformer losses), Power systems, Electrical machines(two machine ratings were given and Iam asked to find which is more cost efficient), Electronics(like Adder, Subtractor, Truth Tables etc.,) and on my elective i.e New Enterprise Creation and Management(NECM).
Skill Tips: Concentrate on learning concepts and applying them for practical purposes.
College Name: NIT WARANGAL
Graduate Engineer Trainee (Get) Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 13 Feb 2015
Interview Preparation Tips
Experience: Questions were general aptitude ranging from analytical reasoning,verbal,quant,reading comprehension and also non verbal total time allotted was 75 minutes and there was sectional cut off for each of the sections.
Duration: 75 minutes
Round: Technical Interview
Experience: Interview was the most important pat of the selection process questions were purely technical .they asked about my project paper presented and training and gave some practical problems interview was for 45-50 minutes.
Tips: Required a good understanding of the core subjects like manufacturing and machine tools.
Round: HR Interview
Experience: HR was apart of the technical assessment itself they inquired about my background and my interest to join the company.
Skill Tips: In the interview the interviewer seemed to put stress on me in the last to judge my temperament rest was all routine type of procedure they followed. L&T is a company that looks for a candidate good in the core subjects rest things like communication and attitude comes second to them so be prepared for the interview and solve some basic aptitude questions before sitting for the company.
College Name: NIT WARANGAL
Graduate Engineer Trainee (Get) Interview Questions & Answers
Larsen & Toubro Limited
Anonymous
posted on 13 Feb 2015
Interview Questionnaire
1 Question
- Q1. Tell me about yourself
Interview Preparation Tips
Experience: Questions were from number system, probablity , common analytical reasoning questions, some questions from vocabulary.
Duration: 150 minutes
Round: Technical Interview
Experience: There was only one round of PI which was completely technical. the following were some of the questions :
1. questions from stress strain diagram of steels
2. FeFe3C diagram
3. fatigue and creep
4. TTT diagram make sure you have an answer to your favorite subject.
Round: HR Interview
Experience: There was nothing like HR other than the basic question.
General Tips: LnT is the first company that visits NITW campus.there are quite a number of applicants, to crack this company you have to brush up your technical fundamentals.
Skill Tips: It was an hour of full technical grind.
College Name: NIT WARANGAL
Graduate Engineer Trainee (Get) Interview Questions & Answers
Larsen & Toubro Limited
Mayank Khatri
posted on 2 Sep 2015
I applied via Campus Placement
Interview Questionnaire
10 Questions
- Q1. Tell us about yourself
- Ans.
I am a recent engineering graduate with a passion for problem-solving and innovation.
Graduated with a degree in engineering
Strong problem-solving skills
Passionate about innovation and technology
Completed internships in relevant fields
Involved in extracurricular activities such as robotics club
- Q2. Some questions on the final year project
- Q3. Questions on favourite subjects. Mine are fluid machines and heat transfer. Types,Principles and Applications of Pumps, turbines, heat exchangers etc
- Q4. Questions on industrial training
- Q5. Do you want to go for further studies? With reason
- Ans.
Yes, I want to pursue further studies to enhance my knowledge and skills in my field of interest.
Further studies will help me gain a deeper understanding of my field and keep up with the latest developments.
It will also help me acquire specialized skills and knowledge that will make me a valuable asset to the company.
For example, I am interested in pursuing a master's degree in computer science to gain expertise in art...
- Q6. What is your choice for the functional area?
- Ans.
I am interested in the field of software development.
My passion lies in coding and developing software applications.
I have experience in programming languages such as Java, Python, and C++.
I am interested in learning new technologies and frameworks.
I believe that software development is a constantly evolving field and I am excited to be a part of it.
- Q7. What extra curricular activities have you been a part of and didnt they affect your studies?
- Ans.
I have been a part of various extracurricular activities such as sports, volunteering, and cultural events. They did not affect my studies negatively.
Participated in inter-college sports tournaments and won medals
Volunteered for a local NGO and organized events for underprivileged children
Performed in cultural events and won prizes
Managed time effectively to balance studies and extracurricular activities
Developed leade...
- Q8. Some other technical questions on manufacturing technology like the types of welding and difference between submerged arc welding and metal inert gas welding
- Q9. Difference between pipes and tubes
- Ans.
Pipes are used to transport fluids and gases, while tubes are used for structural purposes.
Pipes have a standardized outer diameter and thickness, while tubes have a standardized inner diameter and thickness.
Pipes are typically round, while tubes can be round, square, or rectangular.
Pipes are often used in plumbing and HVAC systems, while tubes are used in construction and manufacturing.
Examples of pipes include water ...
- Q10. Types of tubes and which of them is used in a heat exchanger
- Ans.
There are various types of tubes used in heat exchangers including shell and tube, double pipe, and plate and frame.
Shell and tube heat exchangers use tubes that are arranged in a bundle within a cylindrical shell.
Double pipe heat exchangers use two tubes, one inside the other, to create a counterflow arrangement.
Plate and frame heat exchangers use thin plates that are stacked together with small gaps between them to a...
Interview Preparation Tips
Experience: In the technical section there were 45 questions for which 30 mins were given. There were 3 subsections in Aptitude section: Analytical reasoning, Quantitative Aptitude and Verbal Ability. 25 questions in each subsection for which a total of 60 mins was given. Basic questions but conceptual in the technical section. There was separate cut off for each section as well as an overall cutoff.
Tips: Manage your time accordingly. For the technical round (mechanical students) prepare machine design, strength of materials, manufacturing technology properly.
Duration: 90 minutes
Total Questions: 120
Round: Group Discussion
Experience: It was not an elimination round. So, I was relaxed a bit. The topic was something we all think about but rarely discuss with friends. It went good for me. I spoke whenever I got a chance to and I feel the most important thing was being to the point and that our group had a proper discussion coming to a proper conclusion.
Tips: Stick to the basic rules of a group discussion. Do not panic in any condition. Do not speak a lot. Give others also a chance to speak. And most importantly do speak. Even if you are not confident at the start, try speaking and you will eventually gain confidence. And do not think if you are not good at English and all. Keeping your point of view is what you should focus on.
Duration: 30 minutes
Round: Technical Interview
Experience: It was quite good. I felt I did well in my interview. They were correcting me as well whenever I was wrong. Gave advices for life and the industry. I felt quite comfortable communicating with them as well.
Tips: Prepare atleast 2 favourite subjects thoroughly. Prepare the basic HR questions. Have good knowledge of your final year project and the training/internship. Again do not panic if u don't know the answers to some questions. You need not know the answer to each and every question. Be honest and be yourself. Do not try to fake. Do carry a smile throughout and if you are lucky enough you might get selected ;)
General Tips: Even if you do not get selected stay composed. A lot of companies come for recruitment and you just need a good day to get selected. It might have been one of those bad days at the office.
Skills: Technical Knowledge, Aptitude, Communication skills
College Name: NIT Surat
Motivation: It is the biggest engineering company in India (no.1). It gives me the site job that I actually wanted. I wanted to go production side and it gives me a chance to do that. Moreover during my training I would get to explore a number of other moments as well.
Funny Moments: When they asked me if I would go for further studies I simply said no and to the reason I said that I don't have an answer to this why to which they started laughing. Also, during the interview they cracked a few jokes which I didn't understand but I simply laughed along with them :P
MN Dastur & Company Interview FAQs
Tell us how to improve this page.
MN Dastur & Company Interviews By Designations
- MN Dastur & Company Design Engineer Interview Questions
- MN Dastur & Company B E Civil Engineer Interview Questions
- MN Dastur & Company Civil Structural Engineer Interview Questions
- MN Dastur & Company Electrical Engineer Interview Questions
- MN Dastur & Company Electrical and Instrumentation Design Engineer Interview Questions
- MN Dastur & Company Graduate Engineer Trainee (Get) Interview Questions
- MN Dastur & Company Java Developer Interview Questions
- MN Dastur & Company Site Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Graduate Apprentice Trainee Interview Questions
- Graduate Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Graduate Engineer Interview Questions
- Production Graduate Engineer Trainee Interview Questions
- Graduate Student Interview Questions
- Graduate Apprentice Interview Questions
- Post Graduate Engineer Trainee [pget] Interview Questions
- Show more
Graduate Engineer Trainee (Get) Interview Questions from Similar Companies
Fast track your campus placements
|
Principal Engineer
62
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Lead Engineer
41
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Deputy Chief Engineer
38
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Engineer
33
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Superintending Engineer
24
salaries
| ₹0 L/yr - ₹0 L/yr |
TCE
Mecon
Thyssenkrupp Industrial Solutions
Larsen & Toubro Limited
- Home >
- Interviews >
- MN Dastur & Company Interview Questions >
- MN Dastur & Company Graduate Engineer Trainee (Get) Interview Questions for Fresher
